Become a Patron!

HCIGAR VT250s

ej1024

VU Donator
Diamond Contributor
Member For 4 Years
Details:
HCigar VT250s adopts Evolv DNA250 TC chip.The DNA 250 is a power regulated digital switch-mode DC-DC converter for personal vaporizers.It features Evolv’s patented Wattage Control,Temperature Protection, Preheat, OLED Screen, and waterproof onboard buttons. The USB port and Evolv’s EScribe software can be used to customize or monitor the user experience. The DNA 250 runs from a triple cell lithium polymer battery or dual batteries via changing the smaller size of battery back cover and features cell- bycell battery monitoring and integrated 2A balance charger.It can not only meet the vaping player's output power but also guarantee the duration period for a long time.
Zinc alloy construction
Variable wattage: 1W-167W (dual batteries) / 1W-250W (triple batteries)
Temperature control modes: Nickel (Ni200), Titanium (Ti) and Stainless Steel (SS) Wire
Typical resistance: (Kanthal Coil) 0.2ohm; (Temp Control Coil) 0.1ohm
Escribe software: The USB port and Evolv's Escribe software can be used to customize or monitor the user experience
EVOLV DNA250 Chip
0.91'' OLED screen display
Double battery cover design
510 threading connection
Houses dual or triple 18650 batteries (batteries sold separately)
99546445eedbb1dd2153244c873e5bad.jpg
a36d678981c6ac891a409c61fb64bf3c.jpg
8a12768d0a11cb5a9bf6f8ab2bc7c97f.jpg

BUY OR NAH?!


I
 

Hank F. Spankman

Platinum Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Details:
HCigar VT250s adopts Evolv DNA250 TC chip.The DNA 250 is a power regulated digital switch-mode DC-DC converter for personal vaporizers.It features Evolv’s patented Wattage Control,Temperature Protection, Preheat, OLED Screen, and waterproof onboard buttons. The USB port and Evolv’s EScribe software can be used to customize or monitor the user experience. The DNA 250 runs from a triple cell lithium polymer battery or dual batteries via changing the smaller size of battery back cover and features cell- bycell battery monitoring and integrated 2A balance charger.It can not only meet the vaping player's output power but also guarantee the duration period for a long time.
Zinc alloy construction
Variable wattage: 1W-167W (dual batteries) / 1W-250W (triple batteries)
Temperature control modes: Nickel (Ni200), Titanium (Ti) and Stainless Steel (SS) Wire
Typical resistance: (Kanthal Coil) 0.2ohm; (Temp Control Coil) 0.1ohm
Escribe software: The USB port and Evolv's Escribe software can be used to customize or monitor the user experience
EVOLV DNA250 Chip
0.91'' OLED screen display
Double battery cover design
510 threading connection
Houses dual or triple 18650 batteries (batteries sold separately)
99546445eedbb1dd2153244c873e5bad.jpg
a36d678981c6ac891a409c61fb64bf3c.jpg
8a12768d0a11cb5a9bf6f8ab2bc7c97f.jpg

BUY OR NAH?!


I

I think I'll wait for someone special's review.... because there aren't a million other ones, right? LOL
 

mstave

Member For 4 Years
I like the board, and really like the 2 battery form factor. FastTech has an offer for under $110,and I grabbed it. Now just waiting
 

conanthewarrior

Gold Contributor
Member For 4 Years
Nice, I can see the comparison to the RX 2/3 with the 2 or 3 18650's- I do hope people that buy this though remember to set the mod up in Escribe before changing from a 3S to 2S set up!

I don't ahve a DNA250 yet, as I find the DNA200 great, and have enough of them, but I do like this mod with the choice of 2 or 3 batteries. I never use my DNA200's past say 100W or so, and that is when I feel a bit mad, usually I am happy well below this level, but the 2A balance charging and design here is tempting.
 

MannyScoot

Diamond Contributor
Member For 4 Years
I like this one and so does Mike Vapes..... Look at him checking it out.....
C360_2017-03-18-22-06-15-424.jpg

Sent from my Z981 using Tapatalk
 

MannyScoot

Diamond Contributor
Member For 4 Years
Not to change the subject but I've been meaning to ask...

@MannyScoot - do you have a smaller set ups you use while on the go or do you lug those monsters around with you ?
This is what I'm on the truck right now heading to a job site......
041642b8a5e79d54f96fabe5e7a68db6.jpg


Sent from my Z981 using Tapatalk
 

ben73

Gold Contributor
Member For 4 Years
This is what I'm on the truck right now heading to a job site......
041642b8a5e79d54f96fabe5e7a68db6.jpg


Sent from my Z981 using Tapatalk
Do you think its Possible to swap out the 510 For a VT 30mm or even a 40mm Vt 510,
Since the mod sides can take the size ,
I just dont like the way they restrict the 510 by having it sloped making it look like over hangs even though the body is big enough.
Would make more sense having a larger VT 30mm 510 installed would look a lot better ,
Even if you need to raise it a little to fit a sealed 510 then a rubber ring under it so its not catching the battery bay
then id concider this mod if its possible but not seen any one post about it yet

Sent from my ONEPLUS A3003 using Tapatalk
 

MannyScoot

Diamond Contributor
Member For 4 Years
It's not 30mm flat though it tapers off and has that overhang. I wish they had just made it flat
Yeah you're right, but the hole at the end will be a bit larger when you remove the factory 510......
C360_2017-03-20-20-39-29-760.jpg

Sent from my Z981 using Tapatalk
 

VU Sponsors

Top