Become a Patron!

Squonkers are Bonkers

gopher_byrd

Cranky Old Fart
VU Donator
Diamond Contributor
ECF Refugee
Member For 5 Years
VU Patreon
Apparently I need to whine more about slow packages as my wasp will be here tomorrow
I guess I need to start whining. Placed an order with 3F on 5/8 with no indication of any movement. No shipping notice/tracking #. Sigh...:wait:
 

KentA

VU Donator
Bronze Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
ECF Refugee
I guess I need to start whining. Placed an order with 3F on 5/8 with no indication of any movement. No shipping notice/tracking #. Sigh...:wait:
Have you checked your billing? Maybe the order didn't go through.
 

fartbubble

Silver Contributor
Member For 3 Years
Member For 2 Years
Have you checked your billing? Maybe the order didn't go through.

It may have gone through but that clone hasn't come out yet (comes out on the 30th or so). It got pushed back for the cloners to make the body out of delrin.

Edit: take that back, they changed it once again

Please Note: This first batch will be shipped from May 13 according to ordered date.

This first batch arrived at 3FVape on May 15, 2017, orders will be shipped from May 16 according to ordered date.

This next batch will be shipped from May 20 according to ordered date.


edit2: we are talking about that Hidra clone, right
 

Train

Gold Contributor
Member For 5 Years
Noooop. Not me!
I was thinking about it, and curious, and have a clone sitting in a cart...just couldn't pull the trigger on that much (the authentic, I mean) for an RDA that I kind of EXPECT won't have enough airflow for me...



I think train had one. And said origen is still the premier 16mm rda

Sent from my LG-H815 using Tapatalk
 

Train

Gold Contributor
Member For 5 Years
On the other hand, I haven't yet pulled this squinky-dink tiny little thing off. It's a pretty good vape, just a hassle to build.
No one has any guidance on the "swivel-around post"? I really think there must be something you're supposed to do that's just over my head...

viper1.jpg
image74.jpg
 

minimalsaint

Silver Contributor
Member For 3 Years
Member For 2 Years
Member For 1 Year
On the other hand, I haven't yet pulled this squinky-dink tiny little thing off. It's a pretty good vape, just a hassle to build.
No one has any guidance on the "swivel-around post"? I really think there must be something you're supposed to do that's just over my head...

View attachment 82377
image74.jpg

God DAMN you wrap a nice coil!
 

Markw4mms

#Team Jimi Supporter
VU Donator
Diamond Contributor
Member For 4 Years
ECF Refugee
WoooHoooo,my Hidra clone shipped from 3fvape.Have to order the SXK Armor 1.0 clone to top it off. :bliss:
Let us know how well you like it. I've been contemplating ordering one myself.
 

Zaxxaz

Silver Contributor
Member For 4 Years
Let us know how well you like it. I've been contemplating ordering one myself.
I'll definitely give my thoughts on it when it arrives.Hopefully will have it in about 2 weeks.I'm thinking about pre ordering the Icarus clone they just listed also.
 

Markw4mms

#Team Jimi Supporter
VU Donator
Diamond Contributor
Member For 4 Years
ECF Refugee
I'll definitely give my thoughts on it when it arrives.Hopefully will have it in about 2 weeks.I'm thinking about pre ordering the Icarus clone they just listed also.
I got an email about it last week after looking at the authentic Hidra and realizing its out of my price range ATM.:(
 

gopher_byrd

Cranky Old Fart
VU Donator
Diamond Contributor
ECF Refugee
Member For 5 Years
VU Patreon
Have you checked your billing? Maybe the order didn't go through.
The order went through and is just sitting there waiting to be fulfilled... Everything was supposedly in stock. Opened a ticket and got a reply:

Dear customer,
Sorry that I noticed the order should be shipped out in 3~7 business days and there's a few days' delay because we were doing quality test.
I bring you the good news that the order would leave our warehouse in 3 to 5 business days and we would update tracking number for you after dispatching.
Sincerely hope it won't bring you much trouble.
Regards
April

:wait::blah::cuss2::gaah:
 

Train

Gold Contributor
Member For 5 Years
LOL - that's a googled pic. Hahaha.

My coils often are pretty ratty. Every once in a while I get one that looks a bit like that, but not often.

Pretty stoked about this one on my Gorge.
easybuild.jpg

And my Goon22 is pretty good right now...
goonbuild1.jpg

That's about as close as I'll ever get to "Coil P0rn".

God DAMN you wrap a nice coil!
 

TheSneakerWhore

Member For 4 Years
So the stock tubing that comes with the MM bottles is stiff trash for an orca--they need to be worked out quite a bit before being able to assemble easily.
 

Passafire

Member For 3 Years
New squonker here with a pico squeeze question. What exactly happens to the extra wattage on this device that is capped at 50w?

0.2ohm single coil, fully charged 4.2v battery. That would be about 88w, but the squeeze caps at 50w. What's happening internally with the balance of the wattage that is not reaching the coil? The squeeze is not regulated so is it just going back into the battery as heat?
 

JuicyLucy

My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
New squonker here with a pico squeeze question. What exactly happens to the extra wattage on this device that is capped at 50w?

0.2ohm single coil, fully charged 4.2v battery. That would be about 88w, but the squeeze caps at 50w. What's happening internally with the balance of the wattage that is not reaching the coil? The squeeze is not regulated so is it just going back into the battery as heat?

50 W is the maximum it will put out

It will only draw what is needed to fire the coil - it does not automatically draw 50 W
 

fartbubble

Silver Contributor
Member For 3 Years
Member For 2 Years
initial impressions of the wasp is that it's really good with killer flavor even with a stupid build in it for it's space (28g alien). No spitback on the first wicking either
 

BrewBear

Platinum Contributor
Member For 4 Years
On the other hand, I haven't yet pulled this squinky-dink tiny little thing off. It's a pretty good vape, just a hassle to build.
No one has any guidance on the "swivel-around post"? I really think there must be something you're supposed to do that's just over my head...

View attachment 82377
image74.jpg
@Train, what atty is that? There's a :poop:load of tiny squonk atties on the market now, kinda hard to keep up!
 

Train

Gold Contributor
Member For 5 Years
It's a clone of the Hellfire Viper V2.
I feel bad, I really respect the quality of Hellfire stuff, and would buy an authentic if I was pretty sure I'd like it (I have an authentic Fury). But I really didn't think I'd enjoy the 1-hole airflow. But that's pretty good. A bit like the O-16. It's understanding the purpose of the move-able post that's kind of got me stumped...


@Train, what atty is that? There's a :poop:load of tiny squonk atties on the market now, kinda hard to keep up!
 

Le Furet

VU Donator
Silver Contributor
Member For 3 Years
Member For 2 Years
Yo Squonkers!
The Hadaly Drip Tip Express is leaving to make a mad dash for the post office & @JuicyLucy never gave me her mailing address. If anyone has it please shoot me a PM asap, thanks!
 

BrewBear

Platinum Contributor
Member For 4 Years
It's a clone of the Hellfire Viper V2.
I feel bad, I really respect the quality of Hellfire stuff, and would buy an authentic if I was pretty sure I'd like it (I have an authentic Fury). But I really didn't think I'd enjoy the 1-hole airflow. But that's pretty good. A bit like the O-16. It's understanding the purpose of the move-able post that's kind of got me stumped...
I was looking at it, just couldn't make up my mind. My thoughts on the movable post....some guy in the factory f'd up the assembly and a truckload of attyes got messed up. Then, a clever marketing guy was smoking some wacky tabaky wondering how to explain the f-up to the boss and not get fired! He kept looking, puffing, looking, puffing (you get the idea) and hours later the bulb went on: Hey ! it's movable post! Look boss, we have a new product, we gonna sell a truckload of these!
 

Le Furet

VU Donator
Silver Contributor
Member For 3 Years
Member For 2 Years
Annnnd... we're all set (d)rip t(r)ippers!
(awful pun)
Scheduled for your front porch on Monday. Will shoot you tracking as soon as I cool down, fcuking HOT here!
The Hadaly Gods have been good to me today, when I got back home my atty and bell cap were waiting for me...
Gonna install the bf pin and save her for my Tiny Little F#cker. Now if shipping from Germany would only be so fast...
Happy TGIF everyone!
 

Le Furet

VU Donator
Silver Contributor
Member For 3 Years
Member For 2 Years
I found this tiny little black drip tip in my desk drawer and I think it looks awesome on the wasp. I can't remember where it came from but it's got a new home now
24fed7507b1f4e66ab83ff298dfd3ca8.jpg



Sent from my iPhone using Tapatalk Pro

That looks smokin hot bro.
 

JuicyLucy

My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Annnnd... we're all set (d)rip t(r)ippers!
(awful pun)
Scheduled for your front porch on Monday. Will shoot you tracking as soon as I cool down, fcuking HOT here!
The Hadaly Gods have been good to me today, when I got back home my atty and bell cap were waiting for me...
Gonna install the bf pin and save her for my Tiny Little F#cker. Now if shipping from Germany would only be so fast...
Happy TGIF everyone!

:bunny: hoping my luck is turning around on deliveries!


After much BS - finally got my major award....the VooPoo Drag is in hand and vaping, lol
 

VU Sponsors

Top