Become a Patron!

Post your builds

KingPin!

In my defence, I was left unsupervised ^^
VU Donator
Platinum Contributor
Member For 4 Years
VU Challenge Team
Reviewer
@raymo2u i meant to ask how the heck did you Alien those tsukas? It's not like you can really clapton it is it?
 

Lizzardking

Member For 2 Years
Member For 1 Year
Simple classic old skool simplicity a triple parallel 24g ni80 ohm .15 runnin in a kylin rta at 90w waiting for my lungs to calm down to increase watts lol first few draws were dry didn't give enough time to soak the wick m pre juiced it to first hit 50 watts went dry lol
 

Attachments

  • 20170515_232509.jpg
    20170515_232509.jpg
    206.4 KB · Views: 55

Lizzardking

Member For 2 Years
Member For 1 Year
Simple classic old skool simplicity a triple parallel 24g ni80 ohm .15 runnin in a kylin rta at 90w waiting for my lungs to calm down to increase watts lol first few draws were dry didn't give enough time to soak the wick m pre juiced it to first hit 50 watts went dry lol
Sorry can't find my macro lens but it's triple 4/5 wrap n was like squeezing 9.5lbs of shit into a 9lb bag
 

iamadrunkguy

Member For 4 Years
b4ec9ae27a6eaf73caedc602ac76ea67.jpg


Fused Ss Claptons. 2-24ga wrapped in 36 ga. 9 wraps / 4mm on Elite V2 (8 complete then 1/2 each end? Never know how to count the wraps). Came out to .14 ohms. Not bad. Wish it would have been around .25 ish.
Gonna have to mix it up to get ohms up.....


Sent from my iPhone using Tapatalk
 

gakudzu

Gold Contributor
Member For 3 Years
Member For 2 Years
b4ec9ae27a6eaf73caedc602ac76ea67.jpg


Fused Ss Claptons. 2-24ga wrapped in 36 ga. 9 wraps / 4mm on Elite V2 (8 complete then 1/2 each end? Never know how to count the wraps). Came out to .14 ohms. Not bad. Wish it would have been around .25 ish.
Gonna have to mix it up to get ohms up.....


Sent from my iPhone using Tapatalk
Not bad for adrunkguy lol.

Try 26 or 28g to raise the resistance. Then go triple-28 or 30g. Then aliens, staggered, staggerton, fraliens, etc LOL
 

mach1ne

Gold Contributor
Member For 4 Years
nice work @Th3T @Mista Malice @Lizzardking @iamadrunkguy :cheers: @raymo2u i think thats the first set of tsukas i have seen made like that (decored alien style). they have a much different look to them than the twisted wire method. have you tried that with like a .4 or .5 ribbon? i imagine it would get pretty thick in the middle where it twists...smallest i have right now is .3, ill have to try that build later.

decided to rebuild my last framed staples but in the next smaller gauge. 12x.3mmka1/30ka1/42n80 5 3mm wraps .12
fraple2.PNG
got to get better at 42, sometimes there are still rough spots.
 

EMusic

Gold Contributor
Member For 3 Years
Member For 2 Years
After 4 attempts I finally got one
Good job! The best I have done was a few millimeters or so of good alien wire and then ... ruined! I've been scared away from trying to do aliens because of how much wire I go through trying to get it right. Maybe when I get 1000' of wire one day I'll give it another go. :D
 

da_whomp

Member For 2 Years
Member For 1 Year
Reload RTA Build

18299250_1665896183706355_6023497062031556608_n.jpg
18252178_453829195009415_6497679069465804800_n.jpg
18252795_1350432575034651_8303642444394659840_n.jpg
18252519_1263029723811772_2326691742541152256_n.jpg


Some Alien Staggs in the Skill RDA

18380789_250263408782548_7776248725625634816_n.jpg
18380233_524428377946020_2083453334953394176_n.jpg
18380200_440351966318110_6762713070281162752_n.jpg
Absolutely fuckin sick as tits! Hahaa Seriously all your builds are fire. For that Skill rda how'd you grab one? Or did you have to order it from the U.K. and the cheapest I have found with shipping and everything is right around 100$. Kills me haven't pulled the trigger yet but the more I see this rda it just looks good. Anyway I've ordered a Reload rta, should be here within the next few days, how are you liking it so far? Which builds are you finding work best? Thanks man. Keep up the phenomenal coil buildin skillz. But I thought with the Skill rda, no skill was needed... hah bad joke. Oh and I just saw the Skill is now in SS. Right on and keeps on a vapin.
 

da_whomp

Member For 2 Years
Member For 1 Year
Haven't had chance to post in a while (life, funeral, etc, etc) heres some of my latest shots/builds

Fralien - 2x28 N80 / 12x.3 KA1 / 38 N80
View attachment 82228
View attachment 82229
View attachment 82230


RazorHawk / Razorback Mohawk - 3x27 N80 / .2 N80
View attachment 82231
View attachment 82232
View attachment 82233
Sorry about whatever has happened, my thought go out to ya. But dude those buildin skillz are . Seriously very clean and amazing looking. Keeps up the great work man and keeps on a vapin.
 

raymo2u

VU Donator
Platinum Contributor
Member For 4 Years
Unlisted Vendor
Absolutely fuckin sick as tits! Hahaa Seriously all your builds are fire. For that Skill rda how'd you grab one? Or did you have to order it from the U.K. and the cheapest I have found with shipping and everything is right around 100$. Kills me haven't pulled the trigger yet but the more I see this rda it just looks good. Anyway I've ordered a Reload rta, should be here within the next few days, how are you liking it so far? Which builds are you finding work best? Thanks man. Keep up the phenomenal coil buildin skillz. But I thought with the Skill rda, no skill was needed... hah bad joke. Oh and I just saw the Skill is now in SS. Right on and keeps on a vapin.
I grabbed the Skill rda from customvapes.uk for around $78 shipped. Its my #1 rda at the moment and well worth the money. If you want to try it before you buy it try the Skywalker RDA...its basically the same exact design but its SS and its authentic for $15...

The Reload RTA is amazing if you wick it correctly...its a flavor Tank and the design is pretty amazing. Its clean, well built and screams high quality. Its deck is easy to build on and I love how the screws only press on the leads like the skill rda does, they dont look mangled after a install as the screw pins the leads flat.
When your wicking it DO NOT tuck your wicking into the ports...simply cut it flush with the top of the port and st it on top. I like to wet the wicking and press on it to flatten it over the port so it covers it all and stays so when you cap it the wick doesnt move. No leaking and its stays saturated even with the .09 Alien Staggs Ive installed in mine.

You can see where i cut the wicking, just so it would barely dip into the port

20170510_125131.jpg


Then sit it on top of the port, do not tuck it in...it should be barely sitting in the port.

20170510_125147.jpg


47a9f4efe693e1deaa27fef65334fa4c.jpg d041b6d2dc0214a4c2c800a785bf2bb5.jpg
99ae47e7a48fc7c24addb742de26c529.jpg fd9485e1453e77330a84934c50b47f3e.jpg
 

da_whomp

Member For 2 Years
Member For 1 Year
I grabbed the Skill rda from customvapes.uk for around $78 shipped. Its my #1 rda at the moment and well worth the money. If you want to try it before you buy it try the Skywalker RDA...its basically the same exact design but its SS and its authentic for $15...

The Reload RTA is amazing if you wick it correctly...its a flavor Tank and the design is pretty amazing. Its clean, well built and screams high quality. Its deck is easy to build on and I love how the screws only press on the leads like the skill rda does, they dont look mangled after a install as the screw pins the leads flat.
When your wicking it DO NOT tuck your wicking into the ports...simply cut it flush with the top of the port and st it on top. I like to wet the wicking and press on it to flatten it over the port so it covers it all and stays so when you cap it the wick doesnt move. No leaking and its stays saturated even with the .09 Alien Staggs Ive installed in mine.

You can see where i cut the wicking, just so it would barely dip into the port

View attachment 82429


Then sit it on top of the port, do not tuck it in...it should be barely sitting in the port.

View attachment 82428


View attachment 82431 View attachment 82430
View attachment 82432 View attachment 82433
Nice! Now 78$ is doable and much mo betta than 100$. I'm sure it'll be my next rda purchase, it looks so clean and fun too build on. Also a huge thanks for explaining and taking the time to throw some pics of what the wicking should look like on the Reload rta, I totally would have stuffed the ports and get pissed about tasting cotton haha. Man and those Stag Aliens are fuckin rad. I've never seen that build before, that must be a fairly tough build to do, I couldn't imagine of doing Stag aliens since I finally got the spacing method for claptons that works for me. So with those Stag aliens, do you actually wrap two decores at the same time? I'm still learning aliens but I'm at a point where I can get like half a 12" stick with no mess ups. Just looking at like stitched aliens and enigma, pitchfork and several more blow my mind on thinking/figuring out the method for those gnarly builds. Like when I see and staple Stag with like 8-10 spacing in between each other. Anywho I'm rambling. Ohh last thing, I saw your shuttle build on ig first then here I seriously stared at it for 10 mins. Fuckin rad. Right on man and keeps on a vapin.
 

KingPin!

In my defence, I was left unsupervised ^^
VU Donator
Platinum Contributor
Member For 4 Years
VU Challenge Team
Reviewer

KingPin!

In my defence, I was left unsupervised ^^
VU Donator
Platinum Contributor
Member For 4 Years
VU Challenge Team
Reviewer
My first alien build, only took me 5 tries , 4.5 wrap .26 ohm each and may I wish to never do these again, took so much wire and even more whiskey

Congratulations Suga big step right there :)
 

raymo2u

VU Donator
Platinum Contributor
Member For 4 Years
Unlisted Vendor
Nice! Now 78$ is doable and much mo betta than 100$. I'm sure it'll be my next rda purchase, it looks so clean and fun too build on. Also a huge thanks for explaining and taking the time to throw some pics of what the wicking should look like on the Reload rta, I totally would have stuffed the ports and get pissed about tasting cotton haha. Man and those Stag Aliens are fuckin rad. I've never seen that build before, that must be a fairly tough build to do, I couldn't imagine of doing Stag aliens since I finally got the spacing method for claptons that works for me. So with those Stag aliens, do you actually wrap two decores at the same time? I'm still learning aliens but I'm at a point where I can get like half a 12" stick with no mess ups. Just looking at like stitched aliens and enigma, pitchfork and several more blow my mind on thinking/figuring out the method for those gnarly builds. Like when I see and staple Stag with like 8-10 spacing in between each other. Anywho I'm rambling. Ohh last thing, I saw your shuttle build on ig first then here I seriously stared at it for 10 mins. Fuckin rad. Right on man and keeps on a vapin.
Not to sound full of myself but I was dared to try and make a Alien Staggerton about a year ago and I nailed it on my first try. Since then Ive tried to get the spacing perfect, tried with various sized decores and core sizes and alternatives wires. I was the only person making them for a year straight on Instagram but people are starting to notice what Ive been actually posting. I decided to share my routine of making them and Ive gotten atleast 10 other people to make them.

Easy wy of looking at the routine:
You start with a normal 3x28g/36g Alien except you space the alien wraps. I do it by under stretching the decore and giving it a hard angle and using tension to control the spacing size as you go down the length. Then add 28g frames to the core and fuse it with a 24g/36g decore.

My first attempt (JULY 13, 2016)
13712634_577303695781861_1546637736_n.jpg
13714122_1187113368020785_2070861665_n.jpg
13724573_957212594389923_959059923_n.jpg
 

Th3T

Member For 3 Years
Member For 2 Years
Member For 1 Year
Those alien staggertons look beast. Still practicing regular staggertons, stepped up from reading glasses to a magnified lamp/stand and it makes a world of difference for seeing what you're doing. Did my first Staple helix last night it was pretty smooth though it could be cleaner and tighter. Hesitant to wrap it though because I know my first pass was a bit loose.
Also did another staggerton that was originally going to be layered but I didn't like the way the ribbon came out (spacing could be better and it twisted, but I sorta untwisted it lol) I didn't want to waste it so just used it for practice.staple helix.jpg n80stagg.jpg
 

raymo2u

VU Donator
Platinum Contributor
Member For 4 Years
Unlisted Vendor
nice work @whiteowl84 40g alien is next level shit. :cheers:
and a damn good vape!

5x28g N80/40g 316L 4 Wrap/3mm ID Aliens is my favorite build...it makes anything vape really well, lasts pretty log on a tube (especially for its resistance) and its very warm/incredibly flavorful and it likes some airflow..They get better with parallel boxes and with some time they are pretty easy to knock out.

Tips: Use 24g Decore and use a Ribbon slider about a inch from where the alien is going on have it stretched to position and dont use an tension...well just enough to have it wrap correctly.
 

whiteowl84

Silver Contributor
Member For 3 Years
Member For 2 Years
Member For 1 Year
and a damn good vape!

5x28g N80/40g 316L 4 Wrap/3mm ID Aliens is my favorite build...it makes anything vape really well, lasts pretty log on a tube (especially for its resistance) and its very warm/incredibly flavorful and it likes some airflow..They get better with parallel boxes and with some time they are pretty easy to knock out.

Tips: Use 24g Decore and use a Ribbon slider about a inch from where the alien is going on have it stretched to position and dont use an tension...well just enough to have it wrap correctly.
Imo 40g and especially 38g is easier than 36g if you're willing to go full speed.
I don't like having alot of tension on the slinky so if I just stretch it enough it's pretty easy.

Sent from my E5306 using Tapatalk
 

whiteowl84

Silver Contributor
Member For 3 Years
Member For 2 Years
Member For 1 Year
Decore should be 3x smaller than your final build.
28g is 0.321mm, 26g is 0.404mm.
You can choose 26g or 24g.
26g will fit more tightly together while 24g will flare the edges out because you have more curve in the wrap.

Sent from my E5306 using Tapatalk
 

SignMan

Silver Contributor
Member For 4 Years
I hear ya @BKTOAD I didn't quit building but haven't had much time to practice either lol...heres a quick, fast build I made..and then I remembered that I hate how ribbon vapes on the outside of the cores...pulled it out immediately and in to the trash it went. Funny how stapled builds are so great and then you vape one of these! No more I say!0518172343b_HDR_20170520194018508.jpg
 

KingPin!

In my defence, I was left unsupervised ^^
VU Donator
Platinum Contributor
Member For 4 Years
VU Challenge Team
Reviewer
I hear ya @BKTOAD I didn't quit building but haven't had much time to practice either lol...heres a quick, fast build I made..and then I remembered that I hate how ribbon vapes on the outside of the cores...pulled it out immediately and in to the trash it went. Funny how stapled builds are so great and then you vape one of these! No more I say!View attachment 82709

Bet it was popping like a gooden
 

Th3T

Member For 3 Years
Member For 2 Years
Member For 1 Year
Some High Gauge Staggered Variations..

Ti Goon with Black Post Kit, Double Stuffed Variants:




and some Double Framed Staggs in the Reload RTA:


18581109_627037330833658_5182789095381794816_n.jpg
18579816_798224970345411_2548594887201128448_n.jpg
18646012_780388832129255_7832456421462507520_n.jpg
18580560_116474172264576_7586286140349480960_n.jpg
18645613_1903203859936806_4545405885547020288_n.jpg
Nice Raymo! Those double framed stag's look like the ones I tried to make but with ribbon frames and much cleaner haha ( mine was pretty much inspired from one of your older pics ) How do you ever get used to that angle, for me it seems like once your towards the middle of the wrap you gotta go hard left on one side and then back right the next to keep the skipped fuses correct. And eventually for me the angles get so sharp I eventually had to just misplace one to get it back to the original pattern I was going for. Is that normal? I could have just made some mistake when I had to do that.
 

Th3T

Member For 3 Years
Member For 2 Years
Member For 1 Year
I tried my first stitched alien wrap over a framed staple core. I had my lead a bit forward for the first half or so because I was afraid of overlapping and it created a nice spaced effect where you can see the ribbon peeking, and the other half is wrapped a bit closer. I don't know which way I like better. Used 26g KA1/ 6ply .4R KA1/ 36g 316L alien & 40g N80 stitch. I pretty much have the interlock and stitch down, Enigmas here I come!stitchedloose.jpg stitchedtight.jpg
 

raymo2u

VU Donator
Platinum Contributor
Member For 4 Years
Unlisted Vendor
Nice Raymo! Those double framed stag's look like the ones I tried to make but with ribbon frames and much cleaner haha ( mine was pretty much inspired from one of your older pics ) How do you ever get used to that angle, for me it seems like once your towards the middle of the wrap you gotta go hard left on one side and then back right the next to keep the skipped fuses correct. And eventually for me the angles get so sharp I eventually had to just misplace one to get it back to the original pattern I was going for. Is that normal? I could have just made some mistake when I had to do that.
When I paraclap I like to keep the strands at just forward of 90, it makes the clapton straight up and down so when I go to fuse it there is barely any angle at all. If your wire is centered in the drill and spins smooth then you just need to find the angle and tension to mimic the strand you removed....I like to fuse at full speed so after I stumbled upon this its been what Ive done ever since.

Any how here's some Pitchforks I made the day before yesterday:

18645127_215552748949915_8692692547845226496_n.jpg
18646049_356542148077552_2479415784539947008_n.jpg
18645483_313595872404345_7768164076756140032_n.jpg



I also got the Gorge yesterday. A Single Coil RDA that @advkenofficial brought me in on during its beta stages. They were kind enough to use my sketch of the word gorge for the logo...I thought that was kind of cool. Anyways for those who decide to get one...make sure your buckled, this thing is a beast!

18645541_444071795953190_6667284433176887296_n.jpg
18646154_1851623125162424_7012607663565438976_n.jpg
18581276_639686959564112_1299593207541137408_n.jpg
18644736_434117080288030_6691578417470504960_n.jpg
18580520_1803695283278202_7634867666485772288_n.jpg
 

Th3T

Member For 3 Years
Member For 2 Years
Member For 1 Year
Damn full speed on a stagger fuse with those gauges is pretty elite. I can get a steady medium speed when I'm not skipping grooves, but when I go for the skip it happens. Thanks as always for the advice. I'm using a weight to stagger my ribbon stacks still because I keep getting twists when I paraclap(too much tension I believe). Certainly gave me something to think about because the last time I tried to skip fuse round wire frames it was easier perhaps due to being done at a better angle.
Are you not participating in Coil wars civil wars? Would be cool to see you and whiteowl84 in on it but since they're using real names I don't recognize anyone.
 

VU Sponsors

Top