Become a Patron!

BIG BABY BABY HELP!!

Hello, I'm new to these forums and since I can't find anyone else with this "problem" I thought I could ask it myself. So I have the G150 and the Big Baby Beast, so before i wanted to be prepared and bought extra coils and they are the coils that are compatible with tank and when I replaced my default coils with the V8 there has been a 1 second fire delay before it starts pumping out the vapor, what should I do?
 

Mattp169

Platinum Contributor
Vape Media
Member For 5 Years
sounds like a ramp up time issue.
the baby beast has multiple types of coils that are made for it. I have no idea which one you are using. However regardless some coils will heat up ALMOST instantly while others do take a half second to a couple seconds to really heat up depending on your wattage. For example the coils I use on my RTAs at 20 watts would need a few seconds to really heat up to get a good vape but at 50 watts the vape is good almost instantly You can try to turn up your wattage 5 to watts at a time to see if you can decrease the ramp up time while still getting an enjoyable vape
 

Breazy_Com

Excellence In Service
VU Vendor
VU Donator
Platinum Contributor
Member For 4 Years
Look on the coil or the box. It usually tells you the watts range for the coil. You just might need to go up a few watts if it's a heavier coil or different resistance.
 

Just Frank

Platinum Contributor
Member For 5 Years
It sounds like he got M2's if they were for his V8. There are .15 and .25 M2 coils I believe. They say them coils were specifically designed for the V8 stick. I haven't tried any on a box mod.
 

Crunchyblack

Member For 2 Years
Member For 1 Year
You need to increase your preheat temp or wattage. I went from the quad coil (forget the name i think it was V4) to the T6 (both came with my baby beast) and i needed to mess with the setting even after my device auto detected. I have 6 coils now and there was a notable delay. I kicked it up and got instant satisfaction....however i sort of liked drawing in some air first and toned it down enough to allow a very brief delay.

If you have the settings to do it, up the preheat. If not, dont worry coils dont last forever and just get a lower wattage with less coils replacement. Hopefully you have a device that allows tweaking settings like that. If not you just have to find the right coil for your device...all part of getting to know your device.
 
sounds like a ramp up time issue.
the baby beast has multiple types of coils that are made for it. I have no idea which one you are using. However regardless some coils will heat up ALMOST instantly while others do take a half second to a couple seconds to really heat up depending on your wattage. For example the coils I use on my RTAs at 20 watts would need a few seconds to really heat up to get a good vape but at 50 watts the vape is good almost instantly You can try to turn up your wattage 5 to watts at a time to see if you can decrease the ramp up time while still getting an enjoyable vape
Ohh my i god, I'm so clueless. I'm using the octuple coils and yeah, I noticed it would fire immediately at a high wattage
 
You need to increase your preheat temp or wattage. I went from the quad coil (forget the name i think it was V4) to the T6 (both came with my baby beast) and i needed to mess with the setting even after my device auto detected. I have 6 coils now and there was a notable delay. I kicked it up and got instant satisfaction....however i sort of liked drawing in some air first and toned it down enough to allow a very brief delay.

If you have the settings to do it, up the preheat. If not, dont worry coils dont last forever and just get a lower wattage with less coils replacement. Hopefully you have a device that allows tweaking settings like that. If not you just have to find the right coil for your device...all part of getting to know your device.
Damn, I didn't know it was going to be that simple, I feel so stupid, this is my first 100+ watt mod so it all feels so new to me
 

Breazy_Com

Excellence In Service
VU Vendor
VU Donator
Platinum Contributor
Member For 4 Years
That's why your here and we're here ! It's a community that helps each other and is loaded with knowledge combined. This site is like the encyclopedia of vaping !
 

Pastorfuzz

Gold Contributor
Member For 4 Years
VU Patreon
It sounds like he got M2's if they were for his V8. There are .15 and .25 M2 coils I believe. They say them coils were specifically designed for the V8 stick. I haven't tried any on a box mod.
The M2's work on a box if you're running thick juice. I've tried 50/50 with M2's and I didn't like it. Flavor was way down.
 

Letitia9

Citrus Junkie
VU Donator
Platinum Contributor
Member For 4 Years
VU Challenge Team
Welcome to VU. Looks like you found the right place.
 
If you end up feeling the flavor is weak may i reccomend the .15 x4. I have been out of country these last three months and brought a new big baby and regular baby and a pack of x4 and q2. I found the x8 and t6 (both included baby and big baby) to have muted flavor and less life span.
The q2 could is nice, very airy, requires more power (voltage) then the x4 and is easy to clean with qtip or rolled paper towel since single coil is wide open. But overall it's too airy, I like air but even I had to close air on tank more than half.
The x4 have great flavor, and have enough restriction that I dare say you can MTL a little. Also if your lucky you might get 2000 puffs.
Have fun
 

VU Sponsors

Top