Become a Patron!

Post your builds

Th3T

Member For 3 Years
Member For 2 Years
Member For 1 Year
Thanks man! They are an excellent vape for me. Im using 24g for the decore. Same recipe as Raymos last ones. Cant help ya on the enigmas tho. Ive never tried them.

Sent from my SM-G920V using Tapatalk
Doh, just bought a 10ft roll of 22g from work for decoring lol. I figured it might've been a smaller decore for the fuse because it always looks a bit more stretched. It's kool I'll save it for other things like 26g fused snake spine.
I got some Coil Society ribbon coming and more 38g and 40g from them as well. Anyone tried them?
Also how can you watch IG livestreams without the app, I tried googling but can't really find an answer. Would like to get notifications when raymo does his so I can finally catch one.
 

raymo2u

VU Donator
Platinum Contributor
Member For 4 Years
Unlisted Vendor
Doh, just bought a 10ft roll of 22g from work for decoring lol. I figured it might've been a smaller decore for the fuse because it always looks a bit more stretched. It's kool I'll save it for other things like 26g fused snake spine.
I got some Coil Society ribbon coming and more 38g and 40g from them as well. Anyone tried them?
Also how can you watch IG livestreams without the app, I tried googling but can't really find an answer. Would like to get notifications when raymo does his so I can finally catch one.
You can watch them over PC if you download the app via Microsoft store or whatever platforms app store your pc has but not through a browser since the "Stories" dont show with the browser.
 

Johnny VapeStand

Bronze Contributor
Member For 4 Years
Doh, just bought a 10ft roll of 22g from work for decoring lol. I figured it might've been a smaller decore for the fuse because it always looks a bit more stretched. It's kool I'll save it for other things like 26g fused snake spine.
I got some Coil Society ribbon coming and more 38g and 40g from them as well. Anyone tried them?
Also how can you watch IG livestreams without the app, I tried googling but can't really find an answer. Would like to get notifications when raymo does his so I can finally catch one.

I've used their ribbon, and it's not bad. Always comes off the spool straight. Their higher gauge wires are a crap shoot though - the milling sucks. About the same as Lightning Vapes wire.
 

helmet648

Member For 2 Years
Member For 1 Year
oYW38uO.jpg

2 26g nicrome 80 strands and a kanthal a1 .5x.1 ribbon twisted. 4mm wrap 8 wraps ohming out at 0.24ohms at room temp.
 

KingPin!

In my defence, I was left unsupervised ^^
VU Donator
Platinum Contributor
Member For 4 Years
VU Challenge Team
Reviewer
Finally built some stags that i think are worthy to post.
071be4c5e3912343a59fd0f15be6a552.jpg
4fdbe98b67be076305fa2b39eeef34fc.jpg

8x.4/28/40n80 .10 ohm on the Carbonite RDA

Sent from my SM-G920V using Tapatalk

Nice one matey:) ! :bliss::bliss:

Looks absolutely sweet
 

Carambrda

Platinum Contributor
ECF Refugee
Member For 5 Years
Two more shity phone pictures. those are 3 core fused claptons made with ss316L 26 core 36 wrap. there is 1/2 a bottle of whisky in those mf coils to add character haha.
3d7c243c49a3e30c95c20070e4284a1c.jpg
27bb8c27f36ccc3b01ef80a3047cd713.jpg


Sent from my SAMSUNG-SM-G890A using Tapatalk
fdfec022a080adcc53829dccaf0665ba.jpg
its already wicked. my bad.
The whiskey appears to be working because I think I can see each coil twice. Very wicked build indeed! :drunk:
 

Jriley

Bronze Contributor
Member For 3 Years
I keep trying different things to keep it stacked and it just wants to pull away from each other and not stay. When i try staples, framed, ssfc, same keeps happening

Sent from my LGUS610 using Tapatalk
 

whiteowl84

Silver Contributor
Member For 3 Years
Member For 2 Years
Member For 1 Year
Use VG, stack it then hold the stack on one end to make an arch with the stack. It'll pretty much line up and stay together after that. I rarely use it but when I do I treat it like 0.4mm

Sent from my E5306 using Tapatalk
 

Jriley

Bronze Contributor
Member For 3 Years
Use VG, stack it then hold the stack on one end to make an arch with the stack. It'll pretty much line up and stay together after that. I rarely use it but when I do I treat it like 0.4mm

Sent from my E5306 using Tapatalk
Ill try that in a little bit, way to frustrated right now. Ty owl

Sent from my LGUS610 using Tapatalk
 

KingPin!

In my defence, I was left unsupervised ^^
VU Donator
Platinum Contributor
Member For 4 Years
VU Challenge Team
Reviewer
I keep trying different things to keep it stacked and it just wants to pull away from each other and not stay. When i try staples, framed, ssfc, same keeps happening

Sent from my LGUS610 using Tapatalk

0.3 is a royal PITA I agree with you mate hated using it last time managed to make a decent pair of staples with it but it's really difficult to work with
 

Jriley

Bronze Contributor
Member For 3 Years
Yea ... Im a cnc machinist.. I deal with frustrating shit everyday making airplane parts with less han .002 tolerance bbut not even that pisses me off as much as making COILS ... Great time

Sent from my LGUS610 using Tapatalk
 

KingPin!

In my defence, I was left unsupervised ^^
VU Donator
Platinum Contributor
Member For 4 Years
VU Challenge Team
Reviewer
Yea ... Im a cnc machinist.. I deal with frustrating shit everyday making airplane parts with less han .002 tolerance bbut not even that pisses me off as much as making COILS ... Great time

Sent from my LGUS610 using Tapatalk

Cause it's so annoying starting again when you screw up lol ...I had to walk away from builds before cause I was so pissed off especially if you spent ages building up to the final stage and it goes tits up when you go to coil it....that shit really takes the cake!

Fused claptons FTW in those situations lol
 

Jriley

Bronze Contributor
Member For 3 Years
Cause it's so annoying starting again when you screw up lol ...I had to walk away from builds before cause I was so pissed off especially if you spent ages building up to the final stage and it goes tits up when you go to coil it....that shit really takes the cake!

Fused claptons FTW in those situations lol
Lmao yep. Just spent 2 hours making sure my stagger was perfect and my stacked ribbon was perfect.. 3 seconds into wrapping it and i rip it out and throw it away

Sent from my LGUS610 using Tapatalk
 

theclaw20

Bronze Contributor
Member For 3 Years
First ever self made Clapton attempt. Single Coil Dual Fused Clapton 20 gauge / 30 gauge kanthal. 5 wraps. Did it by hand... Imagine it would have been way easier with proper equipment.

0.15 ohms. Hits well at 60watts, which is lower than I had expected.

I have to leave the top airflow open, because not enough air gets in from underneath. I wrapped it around a 3.5mm jig, but it's definitely wider. Next time I'll drop down a size since it is difficult to wrap tight.
10b17ba72d7599af9f28ea18f3a08f2d.jpg
016f641917c23e025500828b659bf5e4.jpg


Sent from my Moto G (5) Plus using Tapatalk
 

Vaping_MD_Student

Member For 2 Years
I'm not up to 3 core yet, but here's my first attempt at fused claptons. 2x26g cores and 32g wrap of Nichrome 80. 2.5mm inner diameter. Ohms out at .14 after pulsing and getting rid of hot spots. I don't have nylon tipped pliers yet so i did my best to straighten it out with nylon tweezers and the toothless portion of my needle-nose pliers. I picked up a Buddha v2 because I wanted a larger deck to build on. Any and all criticism/advice welcome!


863da20bb8e0fd1be578a69d661ba23f.jpg

2f103b15de500c7326027917e456cff7.jpg

635db09732d6ef97adf224f13a641e64.jpg



Sent from my iPhone using Tapatalk
 

Dustyjeans

Bronze Contributor
Member For 4 Years
I'm not up to 3 core yet, but here's my first attempt at fused claptons. 2x26g cores and 32g wrap of Nichrome 80. 2.5mm inner diameter. Ohms out at .14 after pulsing and getting rid of hot spots. I don't have nylon tipped pliers yet so i did my best to straighten it out with nylon tweezers and the toothless portion of my needle-nose pliers. I picked up a Buddha v2 because I wanted a larger deck to build on. Any and all criticism/advice welcome!


863da20bb8e0fd1be578a69d661ba23f.jpg

2f103b15de500c7326027917e456cff7.jpg

635db09732d6ef97adf224f13a641e64.jpg



Sent from my iPhone using Tapatalk
Much better than my 1st fc build! Dont be afraid of using a higher guage wrap tho. Faster ramp up and better flavor with 36g or higher. Its a big rda so an extra wrap woulda helped decrease the leg length. Sometimes long legs can give the vape a metallic flavor in my experience. Keep spinning and youll advance quick!

Sent from my SM-G920V using Tapatalk
 

KingPin!

In my defence, I was left unsupervised ^^
VU Donator
Platinum Contributor
Member For 4 Years
VU Challenge Team
Reviewer
Agree with dusty about gauges here 24/34 26/36 good place to start with fused claptons

Also to close the gaps up both at the claw and vaping student try to keep the wrap at 90 degree Angle as you go. It doesn't need a lead, let it move itself as it wraps, you don't need to push it along (just maintain that angle) and go warp speed on the drill after the first inch or so (once you get in the groove) ....keep the tension on the drill and focus on that angle ...allow the spool to move fairly freely with a little resistence so it keeps the core wire straight as you wrap avoids it backing up on itself then :)

Great job though guys once you master this one it's makes everything else after it a little easier :)
 

Carambrda

Platinum Contributor
ECF Refugee
Member For 5 Years
This is the first build I've been able to shoot properly. I'm glad people are noticing.
I'm using a Sony smartphone, a $15 Zomei macro and a $10 tripod.
Thanks.
2f83aedb8f20bd34e09b904e6828675d.jpg


Sent from my E5306 using Tapatalk
Looks to me like the government could be watching you through that thing. :)
 

Th3T

Member For 3 Years
Member For 2 Years
Member For 1 Year
Got my Coil Society wire yesterday, and so far its great! Much better than lightning vapes for not too much more in price. I finally have some 38g that doesn't snap when stretching for aliens (freakin atomizer wicks lol)! Tested it out and am starting to practice stagger builds with 40g now instead of 38g. Will be trying the enigma again soon. 28g N80 framed, .8x.3KA1 R, 2x 38G 316L interlock fralien. 26g N80 framed, .8x.4KA1 R, 3x 40G N80 SSFC.
38gInterlockfralien2.jpg
40gSSFC2.jpg
 

Jriley

Bronze Contributor
Member For 3 Years
Got my Coil Society wire yesterday, and so far its great! Much better than lightning vapes for not too much more in price. I finally have some 38g that doesn't snap when stretching for aliens (freakin atomizer wicks lol)! Tested it out and am starting to practice stagger builds with 40g now instead of 38g. Will be trying the enigma again soon. 28g N80 framed, .8x.3KA1 R, 2x 38G 316L interlock fralien. 26g N80 framed, .8x.4KA1 R, 3x 40G N80 SSFC.
View attachment 85392
View attachment 85393
Man i wanna make some of those aliens

Sent from my LGUS610 using Tapatalk
 

Jman1234

Member For 2 Years
Member For 1 Year
Second build ever attempted. 24g 10 wraps 4mm beast , good clouds decent flavor. Ramp up is a little delayed but not too bad. Clocked at .3 . Anyone have any other builds I can do with 24g one the Dropbox 160 regulated mod?
 

Attachments

  • IMG_5642.JPG
    IMG_5642.JPG
    617.9 KB · Views: 30
  • IMG_5643.JPG
    IMG_5643.JPG
    648.5 KB · Views: 30

mach1ne

Gold Contributor
Member For 4 Years
nice work everyone <3 im a few pages behind and a month since i built anything (again). always nice to come catch up on this thread and see some new faces and first attempts. also the double framed alien staggs, 40g aliens, hybrids and crazy stagg variations...you guys are killing it :cheers:

i have nothing to show for myself. im in the middle of finding/moving to a new place on very short notice. hopefully mid next week ill be settled into somewhere and building again...
 

BaronVonEyePoke

Bronze Contributor
Member For 3 Years
Member For 2 Years
98677ab334d36f57cea8f92715569121.jpg
nothing all the hat fancy, dual parallel claptons. 2 26g kanthal wrapped with 36g nichrome 3mm ID. It's going into my TFV8. Out of all my RTAs I always wind up going back to this one. It's a solid tank, easy to wick, it has good flavor and great vapor production.


Sent from my iPhone using Tapatalk
 

BaronVonEyePoke

Bronze Contributor
Member For 3 Years
Member For 2 Years
Second build ever attempted. 24g 10 wraps 4mm beast , good clouds decent flavor. Ramp up is a little delayed but not too bad. Clocked at .3 . Anyone have any other builds I can do with 24g one the Dropbox 160 regulated mod?

I have the dripbox 160 too, another decent. Build I found with 24g is 8 wraps spaced with a 3.5mm ID. An easy way that I make spaced coils is to just wrap around your screwdriver with maybe 1/4inch spaces between wraps then once u put the last wrap on and even out the leads I just use my fingers to push all the wraps together against the base of the screwdriver and then I let go of the coil and the wraps just spring back out with even spaces in them. Hope this helps


Sent from my iPhone using Tapatalk
 

whiteowl84

Silver Contributor
Member For 3 Years
Member For 2 Years
Member For 1 Year
Second build ever attempted. 24g 10 wraps 4mm beast , good clouds decent flavor. Ramp up is a little delayed but not too bad. Clocked at .3 . Anyone have any other builds I can do with 24g one the Dropbox 160 regulated mod?
Just rebuild the simple coils with a smaller ID. if you have to wait for something to heat you're draining you batteries and heating the atty. Plus 4mm ID looks way too big for that atty. I'd do 3mm.

Sent from my E5306 using Tapatalk
 

VU Sponsors

Top