Become a Patron!

Can't decide Armomamizer Plus, Ammit Dual Coil or Vandy Vapes Kylin

which tank


  • Total voters
    20

JamesV

Member For 4 Years
So right now I've been vaping Vaperz Cloud VCST 30mm with 316l 3mm 7 wrap fused claptons my favorite coil other than 316l. I love the flavor and dense vapor I get from this tank. But as you know we all have an addiction to buying new tanks. Which tank would you recommend if I want flavor and dense vapor. I'm looking at these three because the postless deck seems awesome and like I could throw some 3.5, 4mm ID fused claptons for some amazing flavor. I'm leaning towards the Armoamizer that comes with he 5, 10, and 20ml conversion kits, plus the build deck is huuuge. But the Ammit has got my eye because I've always had good experiences with geek Vape. Then there's the Kylin I've heard about too.

Love to here from you guys,

James
 

Deucesjack

VU Donator
Platinum Contributor
Member For 4 Years
ECF Refugee
Can't comment on the Ammit Dual because I don't have it. I do have the Aromamizer Plus and I love it. They just made an Aromamizer Supreme V2 which is basically a 25mm version of the Plus. Great tank as well. I love my Kylin. The flavor I get is just phenomenal. Some people have had some issues with seeping bases, I have not. Most I know that are having issues are getting new bases from Vandy Vape. I did full reviews on all of the tanks I mentioned. Here is a link to them.

Vandyvape Kylin Review
http://vapingunderground.com/index.php?threads/325614/

Aromamizer Plus Review
http://vapingunderground.com/index.php?threads/323787/

Aromamizer Supreme V2
http://vapingunderground.com/index.php?threads/329573/

Hope this helps you in your decision.

Sent from my SAMSUNG-SM-G900A using Tapatalk
 

BaronVonEyePoke

Bronze Contributor
Member For 3 Years
Member For 2 Years
I have the aromamizer plus and I gotta tell you, I LOVE this tank bro. I have a few RTAs and this is at the top of the list. I'm running it on my 213+ and the overhang is practically non existent. I'm using volcano wire in it which is some beefy staple staggered fused clapton wire. I have 4 wraps with a 3.5mm ID. And the flavor is noticeably increased. Ohms. Reads at .13-.14 neighborhood. Subtank supply has a good deal on this tank
9138eb626465f774a18d6c41acd720c8.jpg
324c1e5d775e984f79ca335d3a81266e.jpg
47184eb5f8620a2474a4d72098b58c89.jpg



Sent from my iPhone using Tapatalk
 

yasaboss

Bronze Contributor
Member For 4 Years
Love the kylin easy build deck, great flavor and dense clouds and perfect airflow
 

KingPin!

In my defence, I was left unsupervised ^^
VU Donator
Platinum Contributor
Member For 4 Years
VU Challenge Team
Reviewer
The kylin had great flavour but mine was one of the leaky ones

IMG_1171.JPG IMG_1169.JPG

I broke it soon after trying to fix it lol ...I am being sent a replacement deck though

I don't have the other two although reading reviews I'd probably go with the Aromamizer (although for me I like 25mm and below attys so I'd get the V2)
 

MannyScoot

Diamond Contributor
Member For 4 Years
The kylin had great flavour but mine was one of the leaky ones

View attachment 85094 View attachment 85093

I broke it soon after trying to fix it lol ...I am being sent a replacement deck though

I don't have the other two although reading reviews I'd probably go with the Aromamizer (although for me I like 25mm and below attys so I'd get the V2)
I realized that building a .50 ohm dual coil and vaping at 50 to 70 watts reduced the condensation !!!!!
40aafb671a1ea2a56dff2d24df5bccca.jpg


Sent from my Z981 using Tapatalk
 

krypto909

Gold Contributor
Member For 2 Years
Member For 1 Year
The kylin had great flavour but mine was one of the leaky ones

View attachment 85094 View attachment 85093

I broke it soon after trying to fix it lol ...I am being sent a replacement deck though

I don't have the other two although reading reviews I'd probably go with the Aromamizer (although for me I like 25mm and below attys so I'd get the V2)

My Kylin leaks like crazy too. Vandy Vape is gonna send me a new deck.
 

KingPin!

In my defence, I was left unsupervised ^^
VU Donator
Platinum Contributor
Member For 4 Years
VU Challenge Team
Reviewer
Took 13 calendar days from the point of my initial contact (that includes time conversing though)

8 calendar days if you take that bit out now it's on the very slow boat from china so I expect that to take a further 2-3 weeks :)
 

krypto909

Gold Contributor
Member For 2 Years
Member For 1 Year
I contacted Vandy Vape USA about mine and they said they were out of stock and were expecting more in a couple of days. That was Friday. But they assured me that they would send me out a replacement as soon as they got some in. So hopefully my replacement will be on the same boat as yours :/
 

KingPin!

In my defence, I was left unsupervised ^^
VU Donator
Platinum Contributor
Member For 4 Years
VU Challenge Team
Reviewer
I contacted Vandy Vape USA about mine and they said they were out of stock and were expecting more in a couple of days. That was Friday. But they assured me that they would send me out a replacement as soon as they got some in. So hopefully my replacement will be on the same boat as yours :/

Well follow it up if you don't hear anything in 1-2 weeks you will get a follow up email with a tracking reference when it's sent ;)
 

Nevweezy

VU Donator
Silver Contributor
Member For 3 Years
Member For 2 Years
How did you guys contact Vandy Vape. Threw there site or an email. Please let me know?
 

strigamort

Bronze Contributor
Member For 2 Years
Member For 1 Year
I love my Kylin. I don't have a lot of experience, but I do love the flavor, ease of build, quality and everything that comes with it.

My understanding is that the colored Kylin don't have the leaking issue. My red one definitely doesn't. It's fantastic. But now I want an aromamizer! :(

Sent from my ONEPLUS A3000 using Tapatalk
 

KingPin!

In my defence, I was left unsupervised ^^
VU Donator
Platinum Contributor
Member For 4 Years
VU Challenge Team
Reviewer
@krypto909 got my replacement deck through today...they also bunged in some free kanthal wire which was good of them ....hoping this one will be better than the original although it too has the 2 part bottom pin so bit nervous it's gonna be the same ...we shall see!

IMG_1328.JPG
 

KingPin!

In my defence, I was left unsupervised ^^
VU Donator
Platinum Contributor
Member For 4 Years
VU Challenge Team
Reviewer
Early days but rebuilt on the new Kylin deck so far zero leaks from under the base been sitting on the side albeit with JFC shut while not in use (which didn't matter with the last base it leaked regardless!)

When I wicked it i followed vics method albeit using cotton bacon and Scottish roll method ...the rest is the same (half way into the vid below)


Also when vaping even with the cotton stuffed in there I'm only opening the JFC slightly and it's still wicking like a gooden as you can see below! Very good flavour atty finally I get to use my Kylin! Woohoo

IMG_1329.JPG
 

krypto909

Gold Contributor
Member For 2 Years
Member For 1 Year
Early days but rebuilt on the new Kylin deck so far zero leaks from under the base been sitting on the side albeit with JFC shut while not in use (which didn't matter with the last base it leaked regardless!)

When I wicked it i followed vics method albeit using cotton bacon and Scottish roll method ...the rest is the same (half way into the vid below)


Also when vaping even with the cotton stuffed in there I'm only opening the JFC slightly and it's still wicking like a gooden as you can see below! Very good flavour atty finally I get to use my Kylin! Woohoo

View attachment 85912

That's GREAT news!!! I was worrying that the replacement deck might not help much as Vandy Vape released unofficial version 2 of the Kylin (colored with fill slots). I almost purchased the newer version but now I'm glad I didn't. Now I'm totally looking forward to getting the replacement deck and finally using my Kylin. Thanks for update @kingpin and please keep us updated.
 

KingPin!

In my defence, I was left unsupervised ^^
VU Donator
Platinum Contributor
Member For 4 Years
VU Challenge Team
Reviewer
That's GREAT news!!! I was worrying that the replacement deck might not help much as Vandy Vape released unofficial version 2 of the Kylin (colored with fill slots). I almost purchased the newer version but now I'm glad I didn't. Now I'm totally looking forward to getting the replacement deck and finally using my Kylin. Thanks for update @kingpin and please keep us updated.

I'll post back if it goes to crap again!

forgot to mention I did tighten the positive screw a little just to be sure before I reassembled it all :)

Also look where vic has his coils positioned in that vid this is really important I reckon
 

KingPin!

In my defence, I was left unsupervised ^^
VU Donator
Platinum Contributor
Member For 4 Years
VU Challenge Team
Reviewer
That's GREAT news!!! I was worrying that the replacement deck might not help much as Vandy Vape released unofficial version 2 of the Kylin (colored with fill slots). I almost purchased the newer version but now I'm glad I didn't. Now I'm totally looking forward to getting the replacement deck and finally using my Kylin. Thanks for update @kingpin and please keep us updated.

Still dry as a bone no condensation at all base is completely clear refilled multiple times since my initial reply so far so good :)
 
I haven't tried the Ammit or Kylin, so my assessment is only based off the Aromamizer plus. That being said, it doesn't leak, its super easy to build on, and it looks great on the new SXMini G Class. My only con is that I struggle at times moving the juice flow control, even with the included ridges on the ring. I have to approach it with a 'crab claw" hand from above the RDTA to be able to move it without unscrewing it from the mod. Perhaps it will loosen up with use, but for me, it's the only annoyance.
 

Attachments

  • AromizerpluswithSXMiniG.jpg
    AromizerpluswithSXMiniG.jpg
    1.4 MB · Views: 29

Brad Mitchell

Silver Contributor
Member For 4 Years
Member For 3 Years
I haven't tried the Ammit or Kylin, so my assessment is only based off the Aromamizer plus. That being said, it doesn't leak, its super easy to build on, and it looks great on the new SXMini G Class. My only con is that I struggle at times moving the juice flow control, even with the included ridges on the ring. I have to approach it with a 'crab claw" hand from above the RDTA to be able to move it without unscrewing it from the mod. Perhaps it will loosen up with use, but for me, it's the only annoyance.
I can't speak on the plus as I don't own one...yet...but I do own a boreas and at one time the afc/jfc was super hard to turn. It was a messed up o-ring.
 

VU Sponsors

Top