Become a Patron!

New Pulse 24 .. INSANE flavor !!!!!!!

Psychobunny

Bronze Contributor
Member For 2 Years
Member For 1 Year
I am loving the hell out of my new Vandy Vape Pulse 24 RDA...
So far, have only used my own hand made 22ga round kanthal wire, but even that, the flavor
is AWESOME!!!!!!!!

Seems best to me with only 1/2 of one (of 2) air vent holes open. It doesnt reduce the draw much, but
the flavor is better....
 

KarmicRage

Silver Contributor
Member For 2 Years
Member For 1 Year
Thank you for this. Been looking at the pulse for a while but didn't like the 22 for size. Might just have to skint myself again and purchase the 24 now haha

Sent from my SM-N9005 using Tapatalk
 

Psychobunny

Bronze Contributor
Member For 2 Years
Member For 1 Year
Thank you for this. Been looking at the pulse for a while but didn't like the 22 for size. Might just have to skint myself again and purchase the 24 now haha

Sent from my SM-N9005 using Tapatalk

Your welcome.
I didnt like the 22 either, but this one has awesome air flow directed slightly under your coils.. the top half pulls off w/o the whole bottom
part coming off because the bottom o-rings stay tight, even with the condensation..
I love the 4 screws (not the tiny hex head grub screw crap) to clamp the coils, and it's easy to build on this deck.. even large exotic
coils looks like they would work fine.. plenty of room, and the 4 holes are BIG..
Only thing, at first glance, looks like no juice well !!!! But they are off to the sides, and 7mm deep, which is very good.
It also comes with a nice squonk pin, and both 510 pins are nice and flush, so it makes good contact... Love this RDA
Flavor, flavor, and more flavor.... :) :inlove:
 

Minkyjoe

Member For 3 Years
Member For 2 Years
Member For 1 Year
As soon as I seen this I went and ordered the pulse 24 and it landed today,
The flavour out of this is unreal, loving it so far, now I'm gonna have to order a squonk mod
I have been using the pharaoh rta for the last 2 months and the flavour is ok on it but this pulse 24 blows it out of the water.
 

Psychobunny

Bronze Contributor
Member For 2 Years
Member For 1 Year
As soon as I seen this I went and ordered the pulse 24 and it landed today,
The flavour out of this is unreal, loving it so far, now I'm gonna have to order a squonk mod
I have been using the pharaoh rta for the last 2 months and the flavour is ok on it but this pulse 24 blows it out of the water.

I think it's in my top 5 of best RDA's.. and I have been dumping my paychecks into this shit now for weeks.. LOL
The new Aura by Digiflavor and DJLSB Vapes, and the Reload are also in the list.. esp., the Reload, which is the best RDA I have tried
so far for flavor. It's a bit expensive, got the SS version, the titanium is more $$$, but it's my #1 RDA....
Yeah, I am also thinking of getting a squonk box.. which one are u looking at?
 

Psychobunny

Bronze Contributor
Member For 2 Years
Member For 1 Year
Damn. Now I have to have one.


I LOVE to build on this deck.. it's like, zero frustration factor... LOL
The holes are plenty big enough for fat exotic coils.
I havent tried single coil in this one yet though...
 

Minkyjoe

Member For 3 Years
Member For 2 Years
Member For 1 Year
I think it's in my top 5 of best RDA's.. and I have been dumping my paychecks into this shit now for weeks.. LOL
The new Aura by Digiflavor and DJLSB Vapes, and the Reload are also in the list.. esp., the Reload, which is the best RDA I have tried
so far for flavor. It's a bit expensive, got the SS version, the titanium is more $$$, but it's my #1 RDA....
Yeah, I am also thinking of getting a squonk box.. which one are u looking at?
I'm still unsure and haven't done enough looking yet, I don't want a bulky mod as I will be carrying it around with me so will need a single 18650 mod which will be the same as carrying a dual due to the bottle so all iv seen at the moment is the pico squeeze ( only 50w) or the boxer squonker mech mod but I'll do more looking before I buy.
I'm still a total novice when it comes to rebuildables, I spent months using the smok baby beast but got tired of the cost of replacing the coils so decided I needed a rta atty so got the pharaoh due to good size tank and all the reviews on how good the flavour was,
Personally I was disappointed with the flavour from the pharaoh, I even thought the baby had slightly better flavour.
So now I'm here with the pulse 24 and loving it, iv nothing to compare it to as it's my first rda but it beats the pharaoh for flavour so now I need a squonk mod for portability
 

SkoldVape

Gold Contributor
Member For 4 Years
Is it easy to build on?? My nerves are playing up in my hands lately an need something simple. Can't be doing with building in a tiny space!!
 

Psychobunny

Bronze Contributor
Member For 2 Years
Member For 1 Year
Is it easy to build on?? My nerves are playing up in my hands lately an need something simple. Can't be doing with building in a tiny space!!

I know what u mean, I am not as steady as I used to be, and my vision sucks.. so this deck, even though kinda small, is
easy for me..
I just measure the coil, from the bottom of the RDA flush with the bottom of the coil, then cut one of the the leads about 2mm from
the top edge of the RDA..
Then I can put both coils on my jig to cut the other 3 leads, using the first one as a guide.
Then, i just pop them into the holes and straighten them up with my jig...
Easy....
 

SkoldVape

Gold Contributor
Member For 4 Years
I know what u mean, I am not as steady as I used to be, and my vision sucks.. so this deck, even though kinda small, is
easy for me..
I just measure the coil, from the bottom of the RDA flush with the bottom of the coil, then cut one of the the leads about 2mm from
the top edge of the RDA..
Then I can put both coils on my jig to cut the other 3 leads, using the first one as a guide.
Then, i just pop them into the holes and straighten them up with my jig...
Easy....
What price are we talking??
 

Psychobunny

Bronze Contributor
Member For 2 Years
Member For 1 Year
Not bad price at all. Let's just hope they ship to UK


I think MVS only ships within the US.. but there are lots of other places that do world-wide shipping...
I just had a order sent to my friend in Quebec from Vapor Beast..
He is getting into vaping for the first time... so maybe I can help him quit smoking :)
 

xtommytx123

Member For 2 Years
Member For 1 Year
I am loving the hell out of my new Vandy Vape Pulse 24 RDA...
So far, have only used my own hand made 22ga round kanthal wire, but even that, the flavor
is AWESOME!!!!!!!!

Seems best to me with only 1/2 of one (of 2) air vent holes open. It doesnt reduce the draw much, but
the flavor is better....
Hey, what kind of flavor profile are you using with it?
 

xtommytx123

Member For 2 Years
Member For 1 Year
I vape lots of mild to medium dessert type flavors and fruit.. so mostly kinda sweet..
I don't vape tobacco flavors at all.
Ahh ok, yea I'm not a big fan of tobaccos either. But that seems about the same as me I like a lot of fruity flavors, some candys, and the one thing I am always trying to find the best of is vanilla custard. I'm always trying to find new vanilla custards and trying to push the flavor of my my favorites so I might have to give this a try.
 

Minkyjoe

Member For 3 Years
Member For 2 Years
Member For 1 Year
What's the id on that coil? I was thinking if I pick it up would start with 4 id to be close to af, maybe 4.5.
It's 3mm id, very nice flavour with single coil and lots of vapour , little bit of a whistle from the airholes though, might try less wraps and put dual parallels in
 

Letitia9

Citrus Junkie
VU Donator
Platinum Contributor
Member For 4 Years
VU Challenge Team
I was wondering if that was a dual. Lot of wraps. I was thinking dual parallel simple clapton wire or twisted clapton spaced.
 

Minkyjoe

Member For 3 Years
Member For 2 Years
Member For 1 Year
I was wondering if that was a dual. Lot of wraps. I was thinking dual parallel simple clapton wire or twisted clapton spaced.
Yea iv a spool of clapton wire so wrapped a parallel coil with it, was gonna put 2 in it but decided to see how it goes with a single coil in it, iv some nice pre-made coils ordered but still waiting on them
 

Letitia9

Citrus Junkie
VU Donator
Platinum Contributor
Member For 4 Years
VU Challenge Team
I get everything from AVS now. Prebuilt and wire.
 

Letitia9

Citrus Junkie
VU Donator
Platinum Contributor
Member For 4 Years
VU Challenge Team
They are very good at answering if you message them on website. Might have to wait for a weekday. Customer service is awesome. If not, pm me what you want and I can order and mail it to you.
 

inspects

Squonkamaniac
Senior Moderator
VU Donator
Diamond Contributor
Member For 5 Years
I am loving the hell out of my new Vandy Vape Pulse 24 RDA...
So far, have only used my own hand made 22ga round kanthal wire, but even that, the flavor
is AWESOME!!!!!!!!

Seems best to me with only 1/2 of one (of 2) air vent holes open. It doesnt reduce the draw much, but
the flavor is better....
Thanks...ordered the 22 & 24 a few days ago, I've read several articles regarding this being a flavor atty.
 

fozzy71

Silver Contributor
Member For 4 Years
I really need to pick up a dead rabbit or two but just waiting on a cheap regulated dual batt squonker to come out that does decent TC. Supposedly smoant is working on one. Vaping Wich Vic just posted a glowing review of this on youtube and nearly every one in jai haze's wicks and coils facebook group seems to be using the dead rabbit.
 

Psychobunny

Bronze Contributor
Member For 2 Years
Member For 1 Year
Got it glowing perfectly from inside out with very little adjustment suprisingly


When I do long coils, like for my Mason 30mm, I have a hard time getting an even glow... sometimes, it just snaps at the hot spot.. but
better now that i learned NOT to glow them (SS of course) at high watts... I was snapping coils at 60+ watts, stupid me, i learned.....
 

Psychobunny

Bronze Contributor
Member For 2 Years
Member For 1 Year
I really need to pick up a dead rabbit or two but just waiting on a cheap regulated dual batt squonker to come out that does decent TC. Supposedly smoant is working on one. Vaping Wich Vic just posted a glowing review of this on youtube and nearly every one in jai haze's wicks and coils facebook group seems to be using the dead rabbit.


Dont like what they named that RDA..... LOL

But seriously, I have been looking at some Smoant MOD's with interest, but I havent seen much feedback about weather they
are a good, reliable company, or just another made in China MOD....
 

fozzy71

Silver Contributor
Member For 4 Years
Dont like what they named that RDA..... LOL

But seriously, I have been looking at some Smoant MOD's with interest, but I havent seen much feedback about weather they
are a good, reliable company, or just another made in China MOD....
I can't speak to the company but the mods get great reviews and good TC reviews as well. Battlestar and Charon have been on my list for a while but I am in no rush for a new mod unless it is an affordable squonker.
 

bobnat

VU Donator
Gold Contributor
Member For 4 Years

MagicJosh

Silver Contributor
Member For 4 Years
What brand of hex drivers is that? Did you get a set?
Bought them off ebay after searching for the exact sizes I needed for them a while back. I only have 2 sizes Im happy I had one that fit correctly. Those 2 sizes work with every hex screw from any rda. The small one is for rts's and the bigger 1.5 is for rda's. The smaller size is 1.27
 

SkoldVape

Gold Contributor
Member For 4 Years
How is your pulse doing?? And if your still gonna get a smoant mod btw I have had the charon for a month & I have had the battlestar for two months. I would recommend both. The TC is pretty good too.
I love my Speeder but I reach for the battlestar more as i prefer the feel of it in my hand. It's same sort of shape as my tesla wye an wismec mods :)
 

Psychobunny

Bronze Contributor
Member For 2 Years
Member For 1 Year
Put in a single coil but leave the leads long so ya can rotate the coil with a jig so the open ends match up with the air holes


So, you put the cotton wick over the top of the coil instead of inside???
 

VU Sponsors

Top