Become a Patron!

Wire recommendations for 0.2 ohm single coil

This is my first post, so I apologize if there is a more appropriate forum for this question.

I'm a flavor chaser and have recently started using mechanical mods. I find 0.2 ohms to be a good resistance for the vape I enjoy. I'm struggling to find the best wire for a 0.18-0.22 ohm single coil build. I prefer 6-8 wrap fused claptons with 3mm ID. I get great flavor from SS316L and N80. All the wire I've purchased seem to come out above 0.20 ohms for a single coil. For example, I have some 36 SS / 26 SS Fused 2 Core wire that builds out to about 0.27 ohms.

I'd appreciate a recommendation for a clapton wire that'd build out to a 0.2 ohm coil.
 
Thanks r055co. Steam engine is great, but a bit cumbersome to configure for exotic wires. It'd be super useful if wire vendors provided links to steam engine with their wire(s) configured. It appears steam engine supports query string parameters to construct a URL for a specific wire type. e.g. 316L wire with 3mm ID.
 

Fudgey Finger

Silver Contributor
Member For 2 Years
Member For 1 Year
Ok I just played around in steam engine for you and found a good coil for what you are targeting. 8 wrap 3mm Triple core fused Clapton with one 26g core and 2x28g n80 wrapped with 38g ss316. Dual coil it should ohm out at 0.218

Depending on your build deck the resistance may change slightly though so make sure you always use an ohm meter to check your build if you are using mech. This part is vital and must not be skipped if you want to keep your face.

If you can't find a coil like this send me a pm and I can build you a pair.

Sent from my LGL64VL using Tapatalk
 

CactusFanaticus

Silver Contributor
Member For 2 Years
Stainless steel. One of my favorite single coils atm is 3mm 6 wraps SS317L 26x2/38 staged fused clapton, staged with one piece of 26 @ .18-.2.

Super fast ramp from the staging, flavor and clouds from claptons.
03046_AA3-2_C47-40_FE-_B4_FA-00_D8_ED300_D41.jpg
 

Fudgey Finger

Silver Contributor
Member For 2 Years
Member For 1 Year
Disregard the build I posted. I didn't notice that you said you needed a single coil to ohm at .2

Sent from my LGL64VL using Tapatalk
 

Zohmbiebuilds

Silver Contributor
Member For 3 Years
Try nichrome60. Very easy to get low single coil builds and imo I fucking love the taste. Ss had been mentioned. I have a 100ft spool coming. My girl is buying me a drill.

Sent from my Z981 using Tapatalk
 

VU Sponsors

Top