Become a Patron!

squirt squirt... A squonk porn thread

TrollDragon

Silver Contributor
Member For 4 Years
ECF Refugee
Keep the chatter to a minimum please...
I love pic threads, and good luck with the above request. People never read the charter post... :giggle:

Dirt cheap squonks, all RDA's are authentically challenged. ;)

Wraith with the Aeronaut V2, DripBox2 with the KLS and VT Inbox with the Armour 1.0.
Xtk5kmul.jpg

It's an old pic, the Wraith now sports an LE86, the Armor is on the DB2 and a Mesh RDA on the Inbox.
 

BrewBear

Platinum Contributor
Member For 4 Years
I love pic threads, and good luck with the above request. People never read the charter post... :giggle:

Dirt cheap squonks, all RDA's are authentically challenged. ;)

Wraith with the Aeronaut V2, DripBox2 with the KLS and VT Inbox with the Armour 1.0.
Xtk5kmul.jpg

It's an old pic, the Wraith now sports an LE86, the Armor is on the DB2 and a Mesh RDA on the Inbox.
But they are authentically yours!
 

TrollDragon

Silver Contributor
Member For 4 Years
ECF Refugee
Analog box mods dna75c diy kit/Flave 24mm

(Not a fan of the enclosure... I'll be buying a black orca box to transplant the chip into)
8ad3ad3575aa90b7d68d791099dff66e.jpg
Don't say that, mine is inbound. (Dan sent me a 75C instead of a 75 so he reprinted/reshipped it.)
Squonk hole too small?

The top cap it too short to fit the base on the Aeronaut, it hits the posts. That juice well is a foot and a half deep.
 

troydestroy

Silver Contributor
Member For 4 Years
That's the 3D printed Canadian box? What don't you like about it!
Squirt hole entirely too small, the box is much bigger than I'd like and in general I'm not a fan of 3dp unless they are SLS. The truck bed liner helps but it just has a cheap feel.

Now don't get me wrong... This is a helluva mod for the price! I still think it's a great deal/value just not for me. And considering I've been drooling over an Orca DNA... I figured I'd be doing this when i purchased the kit. I'm looking for excuses here :)
 

troydestroy

Silver Contributor
Member For 4 Years
Don't say that, mine is inbound. (Dan sent me a 75C instead of a 75 so he reprinted/reshipped it.)
Squonk hole too small?

The top cap it too short to fit the base on the Aeronaut, it hits the posts. That juice well is a foot and a half deep.
See my comment to brew above :)
 

BrewBear

Platinum Contributor
Member For 4 Years
Squirt hole entirely too small, the box is much bigger than I'd like and in general I'm not a fan of 3dp unless they are SLS. The truck bed liner helps but it just has a cheap feel.

Now don't get me wrong... This is a helluva mod for the price! I still think it's a great deal/value just not for me. And considering I've been drooling over an Orca DNA... I figured I'd be doing this when i purchased the kit. I'm looking for excuses here :)
I agree, the price is good. I had doubts about the squonk window being a little too small. Thank you.
 

snake94115

Diamond Contributor
Member For 4 Years
@snake94115, those are the first randition (?) of the L'il Pinch. The moder is pdib on ecf. This is his thread there https://www.e-cigarette-forum.com/t...zam-←hyperbole.689647/page-1503#post-20263575 the bad news is that pdib is finishing the last batch. The good news is that they become available in the classifieds every once in a while (for a price....) The one I bought was $400 with a Nuppin.
Pass I ain't going to (Brand X) just to buy a mod.Not even if it came with a hooker and a couple pounds of **** for free.
 

snake94115

Diamond Contributor
Member For 4 Years
I love pic threads, and good luck with the above request. People never read the charter post... :giggle:

Dirt cheap squonks, all RDA's are authentically challenged. ;)

Wraith with the Aeronaut V2, DripBox2 with the KLS and VT Inbox with the Armour 1.0.
Xtk5kmul.jpg

It's an old pic, the Wraith now sports an LE86, the Armor is on the DB2 and a Mesh RDA on the Inbox.
Which mesh rda?
The Vandy Vape 1 or The Digiflavor 1?
 

AndriaD

Yes, I DO wear a mask! I'm vaccinated, too!
VU Donator
Diamond Contributor
ECF Refugee
Member For 5 Years
Pass I ain't going to (Brand X) just to buy a mod.Not even if it came with a hooker and a couple pounds of **** for free.

There's only one thing that could get me back over there... but a bus hasn't yet taken out Retarded1 OR Asswife.

Andria
 

hariboholmes

Bronze Contributor
Member For 2 Years
I'm really digging my pocket... Had to completely disassemble and wash to get the machine oil taste it but now it's WOW! Think it may be my new favorite... It's in rotation with b2k and Flave 24 now... Odis v1 sidelined for now...
2dae8279e9673ae35432fa51bd787104.jpg
Yep it's a very nice atty, very very similar vape to a Narda but far easier to build :)

Sent from my Redmi Note 4 using Tapatalk
 

MrMeowgi

The Vapin' Drummer
VU Donator
Diamond Contributor
Member For 4 Years
Where did you find the b2k and the pocket rdas? I really.enjiy the Narda but it's a project to build!

Boxer 18650 and hadaly with black delrin cap and sig tips purple tip.
b959565a34e2bc9cec48cca10c9909bb.jpg
Authentic? Mines a clone and squared off on the atty side.

Sent from my Nexus 6P using Tapatalk
 

BrewBear

Platinum Contributor
Member For 4 Years
Hadaly rda http://www.vaperoyalty.com/hadaly-rda-by-psyclone-mods/
The ShenRay "version" http://www.3fvape.com/rebuildable-a...l?search_query=hadaly&results=26#.Wh402UqnFEY
and the YFTK "version" http://www.3fvape.com/rebuildable-a...l?search_query=hadaly&results=26#.Wh41E0qnFEY
The Therion 75C, best price I found was on FT, with a MAP code is $ 107.
@snake94115 , the two Hadaly styled ones are the better made ones, don't waste your money on the SXK one. I had the SXK but I ended up buying the authentic (first link).
 
Last edited:

snake94115

Diamond Contributor
Member For 4 Years
Hadaly rda http://www.vaperoyalty.com/hadaly-rda-by-psyclone-mods/
The ShenRay "version" http://www.3fvape.com/rebuildable-a...l?search_query=hadaly&results=26#.Wh402UqnFEY
and the YFTK "version" http://www.3fvape.com/rebuildable-a...l?search_query=hadaly&results=26#.Wh41E0qnFEY
The Therion 75C, best price I found was on FT, with a MAP code is $ 107.
@snake94115 , the two Hadaly styled ones are the better made ones, don't waste your money on the SXK one. I had the SXK but I ended up buying the authentic (first link).
Bookmarked and can I get a link for that drip-tip?

1511928176364-542845612-jpg.97544
 

hariboholmes

Bronze Contributor
Member For 2 Years
Man I want a Haku. Just finally got on the Facebook page. Now to try to get one.. how would u say the airflow is on it? I enjoy a restricted lung hit. Am I wasting my time?
Try the SXK clone first it's absolutely identical to the authentic in every possible way.

I was personally quite disappointed, it's quite airy and closed down it just doesn't vape all that great at lower wattages. It needs a pretty big coil to fill the pretty huge centre cavity. The only way I found to get a great vape out of it was with a fat fused Clapton at 50+ Watts on a dual battery squonker. It seems to truly hate simple round wire builds at sensible battery friendly wattages.

I was also horrified at the stupendously tiny grub screws used there is simply no reason on earth why they needed screws this small.

As a final cherry on the cake the Haku seems to have attracted the very worst of the vaping community.. banning people from the group for wanting to try a clone out while they wait a silly amount of time for their authentic to be shipped!

I've no objections to high priced authentics that are hand made in small quantities in USA with immaculate QC etc

$100 for an RDA cheaply manufactured in a Korean sweatshop is taking the piss. An authentic RDA made in a Chinese sweatshop is around $25 manufactured and shipped so somebody is getting very fat from this venture and you can't bet it isn't the Korean factory workers ;)





Sent from my Redmi Note 4 using Tapatalk
 

VU Sponsors

Top