i have an atomizer for clounds and single subohm for cloudsDepends on the coils. The answer is yes, it's enough, but will the coils produce what you want? That's the question. I mean you can build 10 coils and power them with 20w but it's gonna be a utterly shitty build, at least for me and most people. I'm leaning toward no, but without more information I don't know what to recommend.
Are you into clouds primarily, or flavor? I would have to assume clouds?
Yeah man, need more info on your equipment and what you want out of it.
Sent from my ONEPLUS A3000 using Tapatalk
okay. thanks you give me an ideaIf you do single wire builds then maybe. Example is 3 coils made with 28 gauge wire wrapped 6 or 7 times around 3mm diameter. That might work at less than 80 watts or even 26 gauge at the same specs.
Although what I have read is you will get better performance in the same wires ran as parallel in a single coil with or without it being claptoned.
I used three regular kanthal claptons on the Azeroth RTA triple deck that came out about 0.1ohm (.3 ohm per coil) and personally speaking I was vaping it around 70-75 watts and it was fine. Be mindful if using a single 18650 even on a regulated mod, as this will likely be drawing between 20 and 25amps at 80watts, depending on the voltage left in the battery. Therefore, for safety I would recommend using a dual or triple battery mod for higher wattage vaping.i would like to build triple coil but is 80w enough to power it ?
Only one of my regulated mods can't do 200 watts, and I only use it for measuring my ohms.We just need more info. Coils very wildly in performance, styles of vaping play a big part. I think tho, it's a safe bet he ain't using multi core aliens if he's posting this. I'd say 3 coils 2.5 to 3 being the average I'd, and maybe at most Clapton or twisted wire, I'd probably at very minimum want a mod that could do 150.
Sent from my Z981 using Tapatalk
The Sifu B-Tab is highly accurate in that it always reads .01 above the resistance that the vast majority of DNA mods will report.Lol, yeah. I need a tab, but I usually just build on my old Kangertech kbox mini. It's decently accurate, and depending on big wire I can go up in wattage to make installation a dream. So easy.
I'll say this, that little kbox mini taken some abuse and still works.
Sent from my Z981 using Tapatalk
Great way to put it. I get too wordy sometimes trying to explain shit. Nice and simple sometimes works better. Good job CromwellHow many watts for triple coils?
roughly 3X the watts that one of the coils vapes nicely on.
If 1 coil vapes nicely on 30W then 3 would need in the neighborhood of 90W.
Of course it all depends on the coils and atty.
But no an 80w mod will not be adequate for most 3 coil attys as they seem to be mostly made for big high wattage coils.
Just my opinion though, others may vary.
The lowest watts I've ever vaped at was 80 watts on a dual coil 26g Nichrome80 / 36g Nichrome80 fused claptons build with 7.5 wraps, 2.5mm ID. It's how I picked up vaping and got me instantly off cigarettes... about a week later I had already upped it to 90 watts so yeah, if you gave me 30 watts I'd definitely still be smoking cigarettes, as I couldn't even dry burn my coils at 30 watts, let alone vape at 30 watts.Lol, very few single coils would I even like to vape low as 30. 3 26g regular coils could honestly work at 80, but that's the very lowest I'd go. Most single wire ups I vape at 75 Watts. That being said, in that case, I'd probably go up to 115- 130. Every type of coil will cause and effect different standards.
3 26g fused Claptons I'd start of at 80 and go up from there. I'll always try to go low so long as the vape still stands up to my, (my), [MY] standards. I like warm dense vape.
What kind of vape do you like. What coils have your used that you like, also... Think about times that the vape was less than perfect and by much. What made that vape less than satisfactory.
I have and will rip out any set up that's not providing a good vape. Because I can.
Also, if your mod only goes to 80, or 100 what made you get a tri coil set up??
Sent from my Z981 using Tapatalk
lol, a competition with my friends now i got azeroth rta.Lol, very few single coils would I even like to vape low as 30. 3 26g regular coils could honestly work at 80, but that's the very lowest I'd go. Most single wire ups I vape at 75 Watts. That being said, in that case, I'd probably go up to 115- 130. Every type of coil will cause and effect different standards.
3 26g fused Claptons I'd start of at 80 and go up from there. I'll always try to go low so long as the vape still stands up to my, (my), [MY] standards. I like warm dense vape.
What kind of vape do you like. What coils have your used that you like, also... Think about times that the vape was less than perfect and by much. What made that vape less than satisfactory.
I have and will rip out any set up that's not providing a good vape. Because I can.
Also, if your mod only goes to 80, or 100 what made you get a tri coil set up??
Sent from my Z981 using Tapatalk
Lol, very few single coils would I even like to vape low as 30. 3 26g regular coils could honestly work at 80, but that's the very lowest I'd go. Most single wire ups I vape at 75 Watts. That being said, in that case, I'd probably go up to 115- 130. Every type of coil will cause and effect different standards.
3 26g fused Claptons I'd start of at 80 and go up from there. I'll always try to go low so long as the vape still stands up to my, (my), [MY] standards. I like warm dense vape.
What kind of vape do you like. What coils have your used that you like, also... Think about times that the vape was less than perfect and by much. What made that vape less than satisfactory.
I have and will rip out any set up that's not providing a good vape. Because I can.
Also, if your mod only goes to 80, or 100 what made you get a tri coil set up??
Sent from my Z981 using Tapatalk