this^ but go about 10 watts under the lower recommened amount. so for example the T8 use at around 50 watts. 60 watts for the T6, 35 watts for the X4 and 45 for the Q2They are indeed NOT TC coils.
The suggested wattage is printed on them.
V8 Baby-Q2 Dual Core
V8 Baby-M2 Dual Core
- Dual Coil Design
- 0.4ohm rated for 40-80W, recommended 55-65W
V8 Baby-X4 Quadruple Core
- Dual Coil Design
- 0.3ohm rated for 25-45W, recommended 35W
V8 Baby-T6 Sextuple Core
- Quad Coil Design
- 0.15ohm rated for 30-70W, recommended 45-60W
V8 Baby-T8 Octuple Core
- Sextuple Coil Design
- 0.2ohm rated 40-130W, recommended 70-90W
V8 Baby RBA Head
- Octuple Coil Design
- 0.15ohm rated for 50-110W, recommended 60-80W
- Two-Post Design - 0.3ohm Clapton
- Fe-Cr and Nickel-Nichromium Heating Material
- Includes V8 RBA Exclusive Glass Tube, Screwdriver, and Spare Parts
It's more of a preference guideline of where I feel it works best for me. Everyone will have their own sweet spot for sure so do what works for youNot technically true about going 10 watts under recommend watts, but make sure to prime the coils really well and when you first start heating up the coils start at the lowest watt and slowly work up 2 to 5 watts at a time until you get the vape you like. For example with the Q2 after you prime take a few hits (IN WATTAGE MODE ONLY, no matter what coil) at 40 watts and after 5 hits or so jump up to 45 take 5 hits and so on but the higher you get in wattage take 2 watt jumps instead on 5 watt jumps.
the mods won't read the coils exactly as printed. it's normal to be a little off. plus the mods themselves add a little resistance. smok mods tend to read a little high and sig mods tend to read a little low. it's normalNeed help here. I'm fairly new to the vaping world and have a question: I just popped a new v8-T6 coil into my big baby beast tank attached to my smok g-priv mod. When I turn it on it says "New coil? Yes 0.3 ohms, No 0.16 ohms" and when I choose "Yes" the coil ohms are automatically adjusted to 0.3 ohms while the mentioned ohms written on the coil itself is 0.2 ohms. I want to know is it ok like this? If not, then how can I change back the auto adjusted 0.3 ohms to 0.2 ohms on the g-priv? Help is much appreciated!
So is it SAFE to let it vape at 0.3 ohms instead of the recommended 0.2 ohms?the mods won't read the coils exactly as printed. it's normal to be a little off. plus the mods themselves add a little resistance. smok mods tend to read a little high and sig mods tend to read a little low. it's normal
yes as long as it's within .1 of the coil's printed rating it'll be fine. usually say with the .12 ohm coils i put it on my gx350 and it reads .123 i put it on my snow wolf 365 and it reads .11 there will be some small differences. as long as it's small it's ok. My g priv always read a little high but each premade coil isn't going to be exactSo is it SAFE to let it vape at 0.3 ohms instead of the recommended 0.2 ohms?
Thanks mate appreciate your help! Which tank in your opinion is BEST overall to use with g-priv mod? How is tfv8 cloud beast tank?yes as long as it's within .1 of the coil's printed rating it'll be fine. usually say with the .12 ohm coils i put it on my gx350 and it reads .123 i put it on my snow wolf 365 and it reads .11 there will be some small differences. as long as it's small it's ok. My g priv always read a little high but each premade coil isn't going to be exact
not really a best per se. it's more whatever suits your needs. all the smok tanks are good, just depends what wattage you find to be a good vapeThanks mate appreciate your help! Which tank in your opinion is BEST overall to use with g-priv mod? How is tfv8 cloud beast tank?
I only vape in between the recommended lower and higher watts mentioned on the coil itself. v8-X4 is the only coil I have tried so far followed by this current coil v8-T6. Less flavor, more clouds I go for usually.not really a best per se. it's more whatever suits your needs. all the smok tanks are good, just depends what wattage you find to be a good vape
If the baby beast works for you then it's pretty much the best in that watt range.I only vape in between the recommended lower and higher watts mentioned on the coil itself. v8-X4 is the only coil I have tried so far followed by this current coil v8-T6. Less flavor, more clouds I go for usually.
The X-Baby coils are larger diameter than the V8 coils so they are not compatible.Can you use the V8 Baby-Q2 Dual Core 0.4ohm coils in the new TFV8 X-Baby tank ?
I have the same set up and I vape in watt mode at 50 watts and I get all kinds of flavor. 4.5 volts 0.39ohms 11.59 amps and 50 watts even 60 watts you should be getting some flavor. Maybe it's just a bad coil.Hello dears, i need help
Iam using Q2 coil with baby beast tank on alien 220w mod and i vape with 60 watts and normal mode and i don't taste any flavour like i used to even though i did prime the new coil but no taste (sometimes low taste).
This is very frustrating
Please can someone tell me what is causing the problem?