Geek vape aegis legendary
Vaporesso
Wismec
Which would ya'll recomend?
Upgrading from a priv v8.
I use rebuilt coil sub ohm tanks.
I'm it more for flavor. Quit cigs.
Thanks
I'd say it depends on what and where you already invested.
I've purchased disposal mods.. Both eleaf/isticks 100w and tc100w outlived most. The gbox 200 is the only one that makes sense for exploring squonking - why squonk? Because squonkable RDA's are fairly cheap as clones and you can test a dozen ideas cheap.
Squonking? You can get an authentic Wasp Nano for $10; a VLS for about $15. Even a new Recurve is about $20-30. And, then there are clones of good rda squonk atties from $6.You can test a 502 clone for $11.. Want to try mechanical? about $30 investment. Regulated? about $50.
DNA? I got 2 vt133 (DNA200), used, quite cheap. Do I need more of them? Not really. I have tanks that will work on them very well. More often VW mode than TC.
YIHI? I got an sx-mini m-class used, on the cheap. I think it's about as good as a DNA, with better efficiencies. TC mode a little more often than VW, but still.. great value.
Tanks? I have a few duals - a boreas v2 clone that pees all the time, but has great flavor; a griffin25 that never leaks, but has no flavor; an aromamizer v1 that I am tired of coddling, because I can get better flavor elsewhere. I tend to live in the low 20w range, single coils: Taifun gt III, Hussar - both have great flavor; some $5 Monster v2 clones - great flavor and simple.
I've done singles. duals, tanks, rdas (drip this), genesis, squonking, even RBA cartomizers like the Terminator and killer 705(?).
I've even tried Wismec, and will never give them another dime. I'd say your foremost issue is your atomizer, pick a few you can rely on - then get something DNA or YIHI that will Just Work. The gbox is my current exception, as I wanted to get beyond single-cell-mech-squonk - and it's not a huge exception, as I've a buddy with a 3d-printer that wants to try a mod - so, fuckall - we can try a one and 2 cell YiHI and or DNA.
If you want CHEAP and reliable, then check the eleaf/isticks. Why? Because the silly things live long enough to even PIF to others.. And they are supported by Arctic Fox sw.
Haven't heard any complaints since they came to fruition.any opinions on the voopoo too? Is the gene chip that good? Is the mods built well and sturdy? I hear they are about on the dna level
Thanks
I really wouldn't say more ...the atomizer auto set is about all the AEGIS LEGEND is missing ...aesthetically it's about preference. Whereas the Voopoo has Resin plate...The AEGIS has the supple leather palm rest...Fit wise the AEGIS wins hands down with it's form and curves even like the push trigger rocker better. Both function great... I've had the AEGIS for about a week and it gets no rest.... When my Voopoo was stolen I wanted to eventually get another..may still do but for now the LEGEND has plugged it's spot snugly. The Voopoo was riding a hype wave when I got it and believe me it deserves it..... But if I still had it I still would have bought the legend and would probably using it just as much. Also the mesh tank it came with is sick and haven't changed the coil yet even with running about six different juices through itRedbullque, you like the aegis more than the voopoo? If so why?
The biggest complaints about their 510s are from 'reviewers' that said they were bad on the mod these 'reviewers' were looking at. On older mods like the RX200, RX200S, and RX2/3 the spring loaded 510 pin can get stuck after screwing on an atomizer that has a long 510, but placing a plastic washer between such an atomizer and the mod is still an easy solution that works, and that typically has been ignored by the 'reviewers' in question so, right off the bat, this issue has been blown way too far out of proportion. The same ignorance applies to the fact these mods are easy to take apart and put back together again. The 'reviewers' conveniently ignored this fact whilst they kept heavily exaggerating the number of user complaints (i.e. systemically ignoring how that compares to how many users there are who don't have problems) about some certain issues, e.g., problems resulting from the wiring being too thin, the soldering point of the wire breaking off of the 510, and supposedly poor contact between the press fit 510 and the body of the mod (when the reality is that no-one has come up with any real world tests or measurements that support that statement regarding poor contact). Even if the 510 on these mods does have issues─that is, even if we could assume yours will have, and BTW that is a big assumption─it is still easy to replace with a Fat Daddy 510 if you know how to use a dremel and a soldering iron, again because of how easy it is to take the whole mod apart and safely put it back together again. Same deal with the screw threads on the Predator 228 falling out. They can be glued securely back in with a tiny amount of JB Weld or super glue by using just a hammer and 24 hours of patience, yet the 'reviewers' and their fan base kept hammering on the entire Wismec mod lineup instead.I'd vote Vaporesso as I have one of their mods that is great.
Wismec? No idea about their 510s now days. I'd have to get some user reviews, not 'reviewers' that said they were good on the mod I was looking at.
The biggest complaints
Only on those older models that are now obsolete anyway.So, I'm looking for a new mod. In defending Wismec (which I own one that I like), you suggest I take my new mod and;
Use plastic washers to adjust for the lack of travel on certain 510s.
Only on those older models that are now obsolete anyway.Open my new mod up and de-solder then re-solder connections.
Only on those older models that are now obsolete anyway.Take a Dremal and soldering iron to it replacing the 510.
Only on the original oldest Predator 228 model that has since been replaced with an updated model so Wismec have already fixed that issue.Finally, take a hammer and glue to screws holding things together.
Even if these issues had still existed in the newer models that I mentioned, which, BTW, they don't... then, in comparison to what the other brands are doing, right now it would still be the only thing reasonable. That's just how pathetic a regulated mod vapes without using a custom power curve to get the best flavor, and how seriously retarded a custom power curve is without using ArcticFox.Sounds reasonable to me...
Even if these issues had still existed in the newer models that I mentioned, which, BTW, they don't... then, in comparison to what the other brands are doing, right now it would still be the only thing reasonable. That's just how pathetic a regulated mod vapes without using a custom power curve to get the best flavor, and how seriously retarded a custom power curve is without using ArcticFox.
Better flavor is why.
Your opinion. Not consistent, fiddly, not in the running for other than hobbyists.Better flavor is why.
My opinion (actually it is more like an experience) has been backed up by everyone I know has tried the custom power curve. But for reasons that are plenty obvious, opinions from those who consistently kept refusing to try it are best steered clear of (and TBH that's also in my experience).Your opinion. Not consistent, fiddly, not in the running for other than hobbyists.
My opinion (actually it is more like an experience) has been backed up by everyone I know has tried the custom power curve. But for reasons that are plenty obvious, opinions from those who consistently kept refusing to try it are best steered clear of (and TBH that's also in my experience).
No, not everyone likes it.. and in fact I never said that. A lot of people just like to keep nagging on the internet instead, usually about something that they never actually even tried. :hint:Oh, I see now! Everyone likes it.
Well, that's different.
I'll certainly defer my taste, experience, and vaping style for that.
You grow tedious. You have no lock on 'The One True Way To Vape'