Become a Patron!

Bf auto painter

Goddoll

Member For 4 Years
So, I've been vaping since April, and I've tried just about everything. Tanks, prebuilts, dripping, and just last week I got the s-rabbit mod, and tried squonking.

I love squonking. Best vape experience so far. Dripping only takes second seat because it's tedious. I'm a chain vaper though, and the capillaries on a wick can only take so much heat before they can't draw, and start burning up. With dripping, you gotta take off the cap, open your juice, drip, close, line up air, and vape. With bf mods though, you just vape, and squeeze.

Now I'm saying this having burned through 3 wicks in 2 days, on the goon 1.5... Squonking needs an auto painter, and I'm going to tell you how I would build it:

There's a ceramic T draped over the coils, it has three tiny holes at the end 2 opposing at 45 degrees, and the middle one at 90. It paints your coils, your wick doesn't burn in half, everyone loves it.

Now, the part of this that makes it actually work. At the base of the structure, where the extension is actually mounted, there are two vents, to suck back in liquid. These vents are closed when the sq bladder is pressed via a slightly narrower hole cap, and open when the cap is sucked back.

This isn't needed for solo coil mods, because those little things just need gigantic heat sinks, and a magic vapor doubler. I guess they are good for flavor, and are so compact they flood the coil every time you squonk. Of course you gotta build the coil at a 1.5mm or lower diameter, or just deal with blisters on your lips, and spitback from hell. Honestly, I would rather have a sore throat, and have to rewick twice a day.

Somebody, please make this auto painter. I'm broke, so I won't be able to buy it until it gets cloned, and that will complete the circle of intellectual property theft.

Thanks for reading, I hope your day is productive.

Sent from my Pixel using Tapatalk
 

CrazyChef v2.0

Gold Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Reddit Exile
VU Patreon
With dripping, you gotta take off the cap, open your juice, drip, close, line up air, and vape.
Actually, you just drip through the drip tip. That's why they're called drip tips.

Squonking needs an auto painter, and I'm going to tell you how I would build it:
Interesting idea! Do you have a rudimentary drawing so we can see what you mean?
 

Goddoll

Member For 4 Years
Hi, yeah, my drawing sucks.
ad16289484663d96e0d4a0d869f816c9.jpg


Sent from my Pixel using Tapatalk
 

CactusFanaticus

Silver Contributor
Member For 2 Years
I do like the flavor of freshly painted coils over squonking, nothing like that first fresh juicy hit on a low ohm build. Would be interesting to see this materialized, a one way check valve in the bottom to suck back.
 

Goddoll

Member For 4 Years
Also makes your wicks last a lot longer. I've only been doing this a few months, but dripping wicks last longer than bf wicks, and rdta wicks. Tank wicks last longest, but tank flavor just isn't as nice. So, yeah dripping still has the nicest flavor, and gives the wick a good 6-12 Days of chain vaping. Only thing is, it's hard to drip and drive. Just about impossible. I don't recommend it.

Sent from my Pixel using Tapatalk
 

franklin270h

Member For 1 Year
The Boost Lab Tab Atty isn't quite what you're describing, as the build deck/coil it's going for is a bit strange, but it does employ a more top-down style of squonking. Not at all saying that in a debbie downer kind of way for your idea, just as one you might wanna try out and see if it jives for you
 

CactusFanaticus

Silver Contributor
Member For 2 Years
Also makes your wicks last a lot longer. I've only been doing this a few months, but dripping wicks last longer than bf wicks, and rdta wicks. Tank wicks last longest, but tank flavor just isn't as nice. So, yeah dripping still has the nicest flavor, and gives the wick a good 6-12 Days of chain vaping. Only thing is, it's hard to drip and drive. Just about impossible. I don't recommend it.

Sent from my Pixel using Tapatalk
In the mean time an ez dripper for the car maybe?
EZD20-5.jpg
 

Goddoll

Member For 4 Years
The Boost Lab Tab Atty isn't quite what you're describing, as the build deck/coil it's going for is a bit strange, but it does employ a more top-down style of squonking. Not at all saying that in a debbie downer kind of way for your idea, just as one you might wanna try out and see if it jives for you
It's a single coil atty, like the Dee mods clone that came with the s rabbit. Solo coils paint just fine with bf mods. They just are solo mods, so they need higher ohm coils, and throw off mad heat. I was trying to make this work with some triple core alien fused kanthal, and it was leaving blisters. I just mashed a couple of round wire coils together, and that fixed the heat problem. Though, with round wire, you don't need to paint coils, because there's no place for the juice to go on them.

That's the same problem with a hands free dripper, you can't apply juice directly to the coils. I want mad clouds, and amazing flavor. The only way to do that is a bf port that drips down on my coils. If I had a kiln, and lathe, I would just build this, and marry it to my goon 1.5's bf pin.

I don't have that, so here's pictures of my solo coil using alien fused, and just Frankensteined round wire.
10272a447a5e617bb92610cc08a5c2b1.jpg
39c1e6d5cefdf58f75d357747be20c98.jpg


Sent from my Pixel using Tapatalk
 

Rooster Cogburn

Memento Mori
VU Donator
Gold Contributor
Member For 4 Years
ECF Refugee
Reddit Exile
VU SWAT
Maybe try rayon for your wick assuming you’re using cotton. Rayon handles the heat better, has better capillary action improving wicking, and should be able to handle your triple fused staple juggernaut twisted braided alien coils. Even in dual configuration.
 

VU Sponsors

Top