Become a Patron!

Ms. Trixy

VU Donator
Platinum Contributor
ECF Refugee
Member For 5 Years
Reddit Exile
VU Patreon
I'm finding mods I've not heard of before. To me, this would suit ladies.
The panels are not replaceable but the resin, well, it's resin.​
lost-vape-mirage-dna75c-box-mod-7.jpg
 

Countrypami

The Link Ninja
Staff member
VU Administrator
Senior Moderator
VU Vendor Employee
VU Donator
Diamond Contributor
ECF Refugee
VU Live Host
Member For 5 Years
Reddit Exile
VU Patreon
I'm finding mods I've not heard of before. To me, this would suit ladies.
The panels are not replaceable but the resin, well, it's resin.​
lost-vape-mirage-dna75c-box-mod-7.jpg
I like the design, but too expensive for my blood. Most I'll pay for a mod is $50.
 

Teresa P

Senior Moderator
Staff member
Senior Moderator
VU Donator
Diamond Contributor
Member For 4 Years
I believe @Teresa P got this mod not too long ago. She really likes it.
I love it, would like to have a couple more. I even bought one for a friend for his birthday (not the girlie one, his has a skull...lol!). It's definitely not a wrap, doesn't feel like paint though. Whatever it is, it's on there pretty good because mine doesn't have a scratch on it, really durable.
 

snake94115

Diamond Contributor
Member For 4 Years
Hmmm. Do you have one? Can you post plz? I actually do like it.
Yes I do own 1.
However I recently loaned it to a gal I know who makes her own jewelry.

EDIT : ADDED SOME USEFUL INFORMATION & VIDEO + LINK

THIS THING IS BIG IT WEIGHS 14 LBS AND HAS TONS OF EXTRAS
Main compartment presents utility boxes at a 15-degree angle for ease of access
Integrated expandable rear pocket
DuraView™ covers and doors
Non-skid rubber feet
Two top-access storage areas and spacious storage under lid
Multiple waterproof storage options included
Sturdy locking latches and carry handle

INCLUDES

Tackle Box; Three 3700 Series Waterproof StowAway® Utility Boxes; Two 3600 Series Waterproof StowAway® Utility Boxes; One 3400 Series Waterproof StowAway® Utility Box; One Guide Series™ Waterproof Case


http://www.northernmarineelectronic...es-angled-tackle-system-w-7-stowaways-787010/
 
Last edited:

Ms. Trixy

VU Donator
Platinum Contributor
ECF Refugee
Member For 5 Years
Reddit Exile
VU Patreon
I found the Dovpo Batik 24mm at 8Vape for $29.90. They refer to Batik V1 and Batik V2. I Googled the colors; Batik #1 is purple flowers - Batik #2 is colorful flowers. It is not considered unregulated and not fully regulated. It has many built in protections. The potentiometer is actually the bottom dial of a tube mod, like an ego. You turn the dial up or down for voltage. I would stay at 3.8 volts mostly. The instruction book has a chart you can refer to for voltage with the equivalent of wattage. I'm getting #2. It has purple in it and would match with several outfits. I love coordinating. This is a real bargain, to me. Oh, they have many colors, too.
dovpo_mvv_batik_1.jpg

Yeah. The Lost Vape Mirage is off my list. However, at 8Vape I did find the Wismec Sinuous Ravage 230W for only $29.99. Pretty colors. The Gloss Purple has a lot of purple/pink. I'm liking the blue/gold one, too. Everyone else has it listed for $50.00+. This one is mod only and has the shape of the Alien. Rave reviews.
Wismec-Sinuous-Ravage-230-Gnome-King-Starter-Kit-Colors_large.jpg

I called 8vape. They don't give out promo codes since they are competitive all the time.
(Sorry for the large pics. I copied image links.)
 
Last edited:

SnapDragon NY

Senior Moderator
Staff member
Senior Moderator
VU Donator
Diamond Contributor
Press Corps
Member For 5 Years
VU SWAT
I found the Dovpo Batik 24mm at 8Vape for $29.90. They refer to Batik V1 and Batik V2. I Googled the colors; Batik #1 is purple flowers - Batik #2 is colorful flowers. It is not considered unregulated and not fully regulated. It has many built in protections. The potentiometer is actually the bottom dial of a tube mod, like an ego. You turn the dial up or down for voltage. I would stay at 3.8 volts mostly. The instruction book has a chart you can refer to for voltage with the equivalent of wattage. I'm getting #2. It has purple in it and would match with several outfits. I love coordinating. This is a real bargain, to me. Oh, they have many colors, too.
dovpo_mvv_batik_1.jpg

Yeah. The Lost Vape Mirage is off my list. However, at 8Vape I did find the Wismec Sinuous Ravage 230W for only $29.99. Pretty colors. The Gloss Purple has a lot of purple/pink. I'm liking the blue/gold one, too. Everyone else has it listed for $50.00+. This one is mod only and has the shape of the Alien. Rave reviews.
Wismec-Sinuous-Ravage-230-Gnome-King-Starter-Kit-Colors_large.jpg

I called 8vape. They don't give out promo codes since they are competitive all the time.
(Sorry for the large pics. I copied image links.)

I would get #2 Batik in the Dovpo one too!
In the Wismec Ravage I of course would get the rainbow color!
 

Countrypami

The Link Ninja
Staff member
VU Administrator
Senior Moderator
VU Vendor Employee
VU Donator
Diamond Contributor
ECF Refugee
VU Live Host
Member For 5 Years
Reddit Exile
VU Patreon
Scored this puppy for $12.99 during Memorial Day :D Now I gotta decide which of my 70 mods I want to use it on :giggle:

20180601_172517.jpg
 

SnapDragon NY

Senior Moderator
Staff member
Senior Moderator
VU Donator
Diamond Contributor
Press Corps
Member For 5 Years
VU SWAT
Scored this puppy for $12.99 during Memorial Day :D Now I gotta decide which of my 70 mods I want to use it on :giggle:

View attachment 112741

Nice deal Pami-
I get teased when I use mine! Hey at least my mod doesn't light up too!
I put the purple rings in mine for that nice purple glow.
I think this tank vapes really nice too. I guess I can use eLeaf HW1 and the HW2 and also the HDuro(mesh) coils in Smok Big Baby tank
I am trying to find the RBA to fit- I ordered the wrong one from FT- I ordered the RBA glass too, but need the Baby RBA.

20180119_120459.jpg
 

Countrypami

The Link Ninja
Staff member
VU Administrator
Senior Moderator
VU Vendor Employee
VU Donator
Diamond Contributor
ECF Refugee
VU Live Host
Member For 5 Years
Reddit Exile
VU Patreon
Nice deal Pami-
I get teased when I use mine! Hey at least my mod doesn't light up too!
I put the purple rings in mine for that nice purple glow.
I think this tank vapes really nice too. I guess I can use eLeaf HW1 and the HW2 and also the HDuro(mesh) coils in Smok Big Baby tank
I am trying to find the RBA to fit- I ordered the wrong one from FT- I ordered the RBA glass too, but need the Baby RBA.

View attachment 112751
Yeah, that's the problem... I gotta decide which mod it's going on so I can change the orings to match :p
 

nadalama

Senior Moderator
Staff member
Senior Moderator
VU Donator
Diamond Contributor
Member For 4 Years
VU Patreon
Yeah, that's the problem... I gotta decide which mod it's going on so I can change the orings to match :p

What colors of o-rings do you have? Just being nosy.

Hope all of y'all have been doing well lately. It got quiet in here!

I got the Super Tank Mini from BProsek a few days ago. Put one of those Vaporesso ccell coils in it, have been vaping some Cromwell's Custard in it, but have to say, I'm not getting much flavor out of it.

It looks really good on the Apollo CTRL mod I got from the marketplace here, like it was made for it. I did get a stainless DT adapter, and am just using a black delrin drip tip off one of the Herakles Honor tanks on it right now, until I can order what I want for it. I was using a blue snake mini drip tip on it, but moved that to my Triton when I put the Triton back on my Sig Evaya.

No spinning parts on it, so no worries about that.

I just wonder if I need to raise the wattage, or if the flavors in that juice are just too subtle for the tank or the coil. Haven't vaped the Custard in anything but MTL tanks up till now. To give it a fair shot, I'm going to switch the juice out for something a bit bolder in flavor. Maybe some Peppermint Bark would be good.
 

Countrypami

The Link Ninja
Staff member
VU Administrator
Senior Moderator
VU Vendor Employee
VU Donator
Diamond Contributor
ECF Refugee
VU Live Host
Member For 5 Years
Reddit Exile
VU Patreon
What colors of o-rings do you have? Just being nosy.

Hope all of y'all have been doing well lately. It got quiet in here!

I got the Super Tank Mini from BProsek a few days ago. Put one of those Vaporesso ccell coils in it, have been vaping some Cromwell's Custard in it, but have to say, I'm not getting much flavor out of it.

It looks really good on the Apollo CTRL mod I got from the marketplace here, like it was made for it. I did get a stainless DT adapter, and am just using a black delrin drip tip off one of the Herakles Honor tanks on it right now, until I can order what I want for it. I was using a blue snake mini drip tip on it, but moved that to my Triton when I put the Triton back on my Sig Evaya.

No spinning parts on it, so no worries about that.

I just wonder if I need to raise the wattage, or if the flavors in that juice are just too subtle for the tank or the coil. Haven't vaped the Custard in anything but MTL tanks up till now. To give it a fair shot, I'm going to switch the juice out for something a bit bolder in flavor. Maybe some Peppermint Bark would be good.
20180603_182941.jpg
 

nadalama

Senior Moderator
Staff member
Senior Moderator
VU Donator
Diamond Contributor
Member For 4 Years
VU Patreon

I should have known. :D Well for what it's worth, I think the purple or the cobalt blue would look outstanding in that black tank. Really any of them would, though. Do you have a rainbow mod with black trim? Oh, I think I read somewhere earlier in this thread that there was someone here who doesn't like the "mostly black" thing. I love black, don't have much black gear, but tend to put black tanks on mostly-black mods, then you can accent with whichever color strikes yer fancy!

The one and only jWrap I have is their black sparkle. I put it on my (messed up) black Sig Spark, and use a black Kabuki clone on there. Right now it has a medium green acrylic wide-base chimney drip tip on it (basically it's about the shape of a nuclear reactor). Good use for that green tip, as I don't really have anything else it would work with, except maybe all-stainless.

Does your new tank have one of Smok's snake/honeycomb DTs on it? I just love those things, have found similar ones here and there and bought too many of them now. Wide, skinny, flared, all of them short, in five different colors.
 

Countrypami

The Link Ninja
Staff member
VU Administrator
Senior Moderator
VU Vendor Employee
VU Donator
Diamond Contributor
ECF Refugee
VU Live Host
Member For 5 Years
Reddit Exile
VU Patreon
I should have known. :D Well for what it's worth, I think the purple or the cobalt blue would look outstanding in that black tank. Really any of them would, though. Do you have a rainbow mod with black trim? Oh, I think I read somewhere earlier in this thread that there was someone here who doesn't like the "mostly black" thing. I love black, don't have much black gear, but tend to put black tanks on mostly-black mods, then you can accent with whichever color strikes yer fancy!

The one and only jWrap I have is their black sparkle. I put it on my (messed up) black Sig Spark, and use a black Kabuki clone on there. Right now it has a medium green acrylic wide-base chimney drip tip on it (basically it's about the shape of a nuclear reactor). Good use for that green tip, as I don't really have anything else it would work with, except maybe all-stainless.

Does your new tank have one of Smok's snake/honeycomb DTs on it? I just love those things, have found similar ones here and there and bought too many of them now. Wide, skinny, flared, all of them short, in five different colors.
I'm not a fan of black. I like an assortment of colors... one of the reasons I created this thread.

I went with black on this because I didn't want to limit myself to what mod I can pair it with. And I thought the color would pop better off the black than the SS. :)
No, it has a standard black tip. But I have an 810-510 adapter that I can use any of my DT's on.
 

nadalama

Senior Moderator
Staff member
Senior Moderator
VU Donator
Diamond Contributor
Member For 4 Years
VU Patreon

Countrypami

The Link Ninja
Staff member
VU Administrator
Senior Moderator
VU Vendor Employee
VU Donator
Diamond Contributor
ECF Refugee
VU Live Host
Member For 5 Years
Reddit Exile
VU Patreon

Countrypami

The Link Ninja
Staff member
VU Administrator
Senior Moderator
VU Vendor Employee
VU Donator
Diamond Contributor
ECF Refugee
VU Live Host
Member For 5 Years
Reddit Exile
VU Patreon
Anyone like mixing flavors???

1516955044368140.jpg
 

Just Frank

Platinum Contributor
Member For 5 Years
@Countrypami, how are you liking the Feedlink squonk you got? I never tried a squonker before, but that one (Especially the blue) looks awesome. It's one of those items that's calling my name lol.
 

Ms. Trixy

VU Donator
Platinum Contributor
ECF Refugee
Member For 5 Years
Reddit Exile
VU Patreon
Frank, thanks for the info on the Prince/Resa decision in the other thread.

I started my squonking journey today on a Pico Squeeze. Not impressed. But I heard the RDA it comes with sucks. Plus I put a dual clapton build on it. It takes forever to heat up, have the damn near turned off then I a get spit back party. Think I'll try my Aura. I also have the Phobia and a couple of recent other RSDAs I can't recall. I really like the Aura though. I haven't purchased any other BF Mods until I tried it first.
 

Ms. Trixy

VU Donator
Platinum Contributor
ECF Refugee
Member For 5 Years
Reddit Exile
VU Patreon
That is so pretty Trixy-
@Teresa P has one and it is so pretty- love the pattern on this one.

I'm so close to pulling the trigger on this one. I also found a review on the Double Barrel Mod. It gives me more faith in purchasing this one since it is NOT a full mech since it has a chip and protections. Even the Double Barrel Mod isn't considered a Mech. In fact it's widely touted as a lean, mean machine. Has a OLED, wattage only, just like the DovPo Batik #2. Think I'll do it.
 

SnapDragon NY

Senior Moderator
Staff member
Senior Moderator
VU Donator
Diamond Contributor
Press Corps
Member For 5 Years
VU SWAT
Frank, thanks for the info on the Prince/Resa decision in the other thread.

I started my squonking journey today on a Pico Squeeze. Not impressed. But I heard the RDA it comes with sucks. Plus I put a dual clapton build on it. It takes forever to heat up, have the damn near turned off then I a get spit back party. Think I'll try my Aura. I also have the Phobia and a couple of recent other RSDAs I can't recall. I really like the Aura though. I haven't purchased any other BF Mods until I tried it first.

You should have waited until the Pico Squeeze 2 comes out! That is a regulated squonker and you can control the wattage, much better experience.
The 1st Pico squeeze BF is cheap and not a good way to base your decision on Squonk vaping. There are much better squonk mods out there like the HCigar VT Inbox V3 75DNA- love mine and glad I gave squonking another try after I bought one of the first Kanger DripBoxes came out almost 2 years ago- I hated that thing, not regulated and shot hot fiery spitting eliquid- just nasty!
I have the VT Inbox V3 now and will be getting the Pico Squeeze 2 when it comes out and ready for sale! Of course I have to have the Dazzling ( rainbow)colorway!

 

SnapDragon NY

Senior Moderator
Staff member
Senior Moderator
VU Donator
Diamond Contributor
Press Corps
Member For 5 Years
VU SWAT
I'm so close to pulling the trigger on this one. I also found a review on the Double Barrel Mod. It gives me more faith in purchasing this one since it is NOT a full mech since it has a chip and protections. Even the Double Barrel Mod isn't considered a Mech. In fact it's widely touted as a lean, mean machine. Has a OLED, wattage only, just like the DovPo Batik #2. Think I'll do it.

Which one are you getting?
The Double Barrel or the Dovpo Batik?
Many here have the Double Barrel and love that mod. I think the Dovpo Batik looks nicer. Yes both have protections.
I don't own either so I can't comment on their performance.
 

gadget!

"The Trader"
VU Donator
Platinum Contributor
Member For 5 Years
VU SWAT
VU Patreon
I'm so close to pulling the trigger on this one. I also found a review on the Double Barrel Mod. It gives me more faith in purchasing this one since it is NOT a full mech since it has a chip and protections. Even the Double Barrel Mod isn't considered a Mech. In fact it's widely touted as a lean, mean machine. Has a OLED, wattage only, just like the DovPo Batik #2. Think I'll do it.
Which one are you getting?
The Double Barrel or the Dovpo Batik?
Many here have the Double Barrel and love that mod. I think the Dovpo Batik looks nicer. Yes both have protections.
I don't own either so I can't comment on their performance.
The Double Barrel is a sweet device.
The size is awesome, it's not much bigger than 2 18650 batteries.
It's a simple no frills regulated mod that just works.
I like mine and use it regularly.
If you get the kit, the tank is compatible with SMOK Baby Beast Coils.

77289a0ec17ce581c05078143a5854a0.jpg


Sent from a Galaxy far far away!
 
Last edited:

Ms. Trixy

VU Donator
Platinum Contributor
ECF Refugee
Member For 5 Years
Reddit Exile
VU Patreon
You should have waited until the Pico Squeeze 2 comes out! That is a regulated squonker and you can control the wattage, much better experience.
The 1st Pico squeeze BF is cheap and not a good way to base your decision on Squonk vaping. There are much better squonk mods out there like the HCigar VT Inbox V3 75DNA- love mine and glad I gave squonking another try after I bought one of the first Kanger DripBoxes came out almost 2 years ago- I hated that thing, not regulated and shot hot fiery spitting eliquid- just nasty!
I have the VT Inbox V3 now and will be getting the Pico Squeeze 2 when it comes out and ready for sale! Of course I have to have the Dazzling ( rainbow)colorway!

OMG! I saw a video by chance today. I love it! Cute little thing AND it's fully regulated. I had no idea this one was not. Going to clean it up and trade/sell it. I have the black one still new in the box. Only use this one once.

Which one are you getting?
The Double Barrel or the Dovpo Batik?
Many here have the Double Barrel and love that mod. I think the Dovpo Batik looks nicer. Yes both have protections.
I don't own either so I can't comment on their performance.

I'm getting both. I'm tired of getting all of the mainstream stuff. I'm going to lean toward collectables and just a few for my own use. Hell, after the massive amount I've purchased, I only have 15 mods, 3 picos up to the Abalone Rx150. Nothing fancy. Same with my tanks and attys. I've found a few FB groups for AZ buy, sell, trade tonight. Plus there's eBay. I also have some expensive size 8.5-9 women's stilleto pumps from a client of Chuck's. Probably $200 ea or so. Plus a few of mine size 10, like Sketchers I've only worn maybe 4 times, etc. AND, clothes I have still with tags I bought for reviews. Pffft. I don't need them. No one cares.

The Double Barrel is a sweet device.
The size is awesome, it's not much bigger than 2 18650 batteries.
It's a simple no frills regulated mod that just works.
I like mine and use it regularly.
If you get the kit, the tank is compatible with SMOK Baby Beast Coils.

77289a0ec17ce581c05078143a5854a0.jpg


Sent from a Galaxy far far away!

Gadget, Gadget, Gadget! Why does it not surprise me that you have one. I know! It's SO awesome! Amazing mod masterpiece and the icing on the cake is the (PMT) Peacemaker Tank takes Baby coils! Have you tried his Flax coils? Either way, I'm buying some (plural). I just emailed Squid with some suggestions and to see when the Limited Edition will be released again. They only released 56/500. Yes, I'm stoked!
 
Last edited:

SnapDragon NY

Senior Moderator
Staff member
Senior Moderator
VU Donator
Diamond Contributor
Press Corps
Member For 5 Years
VU SWAT
Yes. (I just doinked myself on the head) I couldn't remember the whole name. :facepalm:
But Steve, one of the panels is lifting up at one side and one rounded corner. I thought superglue and a vice for a while.?
I am not sure on the Super Glue- too watery. Hey @gadget! what do you suggest? I know that you change out the leather on the Therion covers-
 

gadget!

"The Trader"
VU Donator
Platinum Contributor
Member For 5 Years
VU SWAT
VU Patreon
I am not sure on the Super Glue- too watery. Hey @gadget! what do you suggest? I know that you change out the leather on the Therion covers-
I use Aleene's Tacky Glue.
It comes in clear or white but either one dries clear.
It's easy to work with and after it dries a damp cloth will clean up any excess glue.

fa2a0d18fea81bf19a9b3f6e9a793d82.jpg


ac354e27c2f3cbf67565bc6f54828cb8.jpg


Sent from a Galaxy far far away!
 
Last edited:

Countrypami

The Link Ninja
Staff member
VU Administrator
Senior Moderator
VU Vendor Employee
VU Donator
Diamond Contributor
ECF Refugee
VU Live Host
Member For 5 Years
Reddit Exile
VU Patreon
This is what I use and what most tip makers use to glue the cores in. I've never had one come apart and I soak my tips in hot water all the time.
71JXbc0Gv3L._SY879_.jpg
 

nadalama

Senior Moderator
Staff member
Senior Moderator
VU Donator
Diamond Contributor
Member For 4 Years
VU Patreon
Oh, speaking of tips! My DT from Rhonda came the other day.

It's exactly what I ordered, but have to say, at first glance I was disappointed. Didn't realize how fat "fat as possible" would be in this particular shape (rainforest). If I had it to do over again, I'd order 3/4" regular instead of 1" fat as possible. Also there is far more very bright pink in the acrylic than I expected. However, having said all that, I realized that it might look pretty good on my black-and-rainbow Capo with a black Illusion Mini tank, and it does work quite well there. The whole assembly, mod, tank, and DT, is pretty short-and-wide.

I'll see if I can get a decent picture.

IMG_0161.JPG
 
Last edited:

Countrypami

The Link Ninja
Staff member
VU Administrator
Senior Moderator
VU Vendor Employee
VU Donator
Diamond Contributor
ECF Refugee
VU Live Host
Member For 5 Years
Reddit Exile
VU Patreon
Oh, speaking of tips! My DT from Rhonda came the other day.

It's exactly what I ordered, but have to say, at first glance I was disappointed. Didn't realize how fat "fat as possible" would be in this particular shape (rainforest). If I had it to do over again, I'd order 3/4" regular instead of 1" fat as possible. Also there is far more very bright pink in the acrylic than I expected. However, having said all that, I realized that it might look pretty good on my black-and-rainbow Capo with a black Illusion Mini tank, and it does work quite well there. The whole assembly, mod, tank, and DT, is pretty short-and-wide.

I'll see if I can get a decent picture.
Oh yeah... Fat is FFFFFFFFAAAAAAAATTTTTTT at AHD! As far as the colorations, every single tip is custom made from blanks. No 2 tips are ever the same. I've had some I didn't think were as pretty as the ones I seen and some that I thought were absolutely stunning compared to the other ones I'd seen.
 

Ms. Trixy

VU Donator
Platinum Contributor
ECF Refugee
Member For 5 Years
Reddit Exile
VU Patreon
Available from lots of suppliers

I had a hard time finding them when the mod first came out and spaced it, as my only concern is repairing this one. Thanks!

@gadget! and @Countrypami Thank you! I may order both. Chuck is on projects that may need good glue. My panel is lifting at one corner and all the way down one side. You can't tell by looking, but certainly while holding the mod.

@SnapDragon NY "I like fat tips and I cannot lie" - LOL
I actually do. I have a Clieto tip that's so fat on the bottom it nearly covers the top of the tank. Then narrows a tad in the center and flutes a bit at the top as not to restrict airflow. Is that a wide bore 510 or 810/Goon? How thick is it?
 

nadalama

Senior Moderator
Staff member
Senior Moderator
VU Donator
Diamond Contributor
Member For 4 Years
VU Patreon
@SnapDragon NY "I like fat tips and I cannot lie" - LOL
I actually do. I have a Clieto tip that's so fat on the bottom it nearly covers the top of the tank. Then narrows a tad in the center and flutes a bit at the top as not to restrict airflow. Is that a wide bore 510 or 810/Goon? How thick is it?

Is this question about the pic I posted above? If so, it's a 510, but really not wide-bore. I think the airflow opening in the center of the tip is about 5mm. I'd guess that the diameter of the base of the DT, at its widest point, is maybe 16-17mm. The tank it's on is a tad over 24mm. I'm guessing - don't have calipers to measure it exactly. It's a few mm narrower than a Nautilus Mini, which I think is 19mm at its base.
 

Ms. Trixy

VU Donator
Platinum Contributor
ECF Refugee
Member For 5 Years
Reddit Exile
VU Patreon
Is this question about the pic I posted above? If so, it's a 510, but really not wide-bore. I think the airflow opening in the center of the tip is about 5mm. I'd guess that the diameter of the base of the DT, at its widest point, is maybe 16-17mm. The tank it's on is a tad over 24mm. I'm guessing - don't have calipers to measure it exactly. It's a few mm narrower than a Nautilus Mini, which I think is 19mm at its base.

It sure is a fat tip. How thick is the wall of the opening? 1mm, 3mm, 3.5mm, etc. The wall (thickness) looks pretty beefy at the top, too.
 

VU Sponsors

Top