Become a Patron!

Post your builds

CrazyChef v2.0

Gold Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Reddit Exile
VU Patreon
Got the Vandy Vape Triple RTA in a trade with Redbullque, so I put a simple fused Clapton build in it. 2x27K/42N. In addition to the awesome flavor, this thing could easily win a cloud comp with these 3 coils. And it fits nicely on the TAC 21.

ZRB0GIT.jpg

Q7lb2dg.jpg

e8soh74.jpg

SCbEU0P.jpg

AWyTLoz.jpg

qtSfsMX.jpg
 

mojo21

Member For 1 Year
Just got my wire order today to . Gonna try some diff. Combos of all n80 and all SS . Since I've been building I always used kanthal for cores and n80 for wrap and the flavor was on point so I never tried anything else but been curious to try some diff. Wire. Combos so gonna give it a go tonight . Cheers all !
58b724a94f83ac083c021e2c607f1a06.jpg


Sent from my SM-G955W using Tapatalk
So finished a couple ss 3 core alien with pre stretch method to get used to it from now on . I figure if I keep them smaller for a single coil each de-core then I don't need to worry about snags. Anyway all I got to say about ss is holy low ohms ! Compared to my same setup with ka1 and n80 ! .20 compared to .27

Sent from my SM-G955W using Tapatalk
 

mojo21

Member For 1 Year
Just got my wire order today to . Gonna try some diff. Combos of all n80 and all SS . Since I've been building I always used kanthal for cores and n80 for wrap and the flavor was on point so I never tried anything else but been curious to try some diff. Wire. Combos so gonna give it a go tonight . Cheers all !
58b724a94f83ac083c021e2c607f1a06.jpg


Sent from my SM-G955W using Tapatalk
Here it is
11bb1884ac04a6ab7eea5c8050ac15e2.jpg


Sent from my SM-G955W using Tapatalk
 

chrisakasparky

Silver Contributor
Member For 4 Years
Here it is
11bb1884ac04a6ab7eea5c8050ac15e2.jpg


Sent from my SM-G955W using Tapatalk

Looks great! A lot of us do one coil worth of decore at a time, nothing wrong with that. I use a little clothespin to start my second decore in the middle of a stick.
And yea that same build will have lower ohms so more power. If it’s too much you can add a wrap.
Also, if you’re running a mod with one battery, be careful. 0.20 ohms is right at the amperage limit of a single good 18650 on a mech mod.
 

zephyr

Dirty Pirate Meg
VU Donator
Gold Contributor
Member For 4 Years
Unlisted Vendor
Awesome! SS colors are great huh? I really gotta try some mixed up builds that’s really cool! I wanna see how it glows!


It's incredible, I want to get a super close up of part of this

Now I'm gonna try making an alien staggerton for shred with this .4 ribbon
 
Last edited:

Shredtravolta

VU Donator
Silver Contributor
Member For 4 Years
Unlisted Vendor
Very cool shred! Congrats

Always wondered if tsukas spit badly let me know your thoughts :cheers:
I can't lie to you King. It's not the greatest vape. I did it just to challenge myself and see if I could complete the build. Turned out it really wasn't that hard using Ndevine83's tutorial on them. They are more for the look of it than anything else.
 

Shredtravolta

VU Donator
Silver Contributor
Member For 4 Years
Unlisted Vendor
:zombie: fruit stripe gum
View attachment 115633 View attachment 115634

Man...hard lol...i let the ribbon roll on one side cause F it, almost 3 am gosh

0.11 ohms though, next one is all n80 wrap shred!

View attachment 115635
Looks great Meg! I'm still practicing just the round wire version I find that the challenge is really getting the spacing close enough on the first pass so that after you do the second pass and coil it, it doesn't look like a bunch of Buk**kee.:coffee:
 

KingPin!

In my defence, I was left unsupervised ^^
VU Donator
Platinum Contributor
Member For 4 Years
VU Challenge Team
Reviewer
I can't lie to you King. It's not the greatest vape. I did it just to challenge myself and see if I could complete the build. Turned out it really wasn't that hard using Ndevine83's tutorial on them. They are more for the look of it than anything else.

great you ticked it off the list though mate :cheers:never tried them myself ...many thanks I tend to stick to stuff I can vape so it’s good to know they are a coil porn build
 

Shredtravolta

VU Donator
Silver Contributor
Member For 4 Years
Unlisted Vendor
great you ticked it off the list though mate :cheers:never tried them myself ...many thanks I tend to stick to stuff I can vape so it’s good to know they are a coil porn build
Yeah I know what you mean. I'm in love with the idea of being able to create a build I have never done before. None the less I would say 98% of the coils I build are just for show. I don't actually vape them. I usually give them away. Sometimes I'll mail a coil to someone and say hey if you like the vape you can donate at ....... and I give them my paypal but I never demand money. The only coil I actually vape is a 6 ply .5/ 26g frame/36-38g decore off a 26g wire Fralien. Ohms at about .13. That's the vape I enjoy the most.:D
 

william.osendott

Bronze Contributor
Member For 4 Years
@Pegleg Meg you’re on a rampage lol
More alien practice for me!
6x28 ss316l, 36 n80
4mm id, .13 ohms
be9808a9aba25637edcede30355830bf.jpg
was planning to make an N80 version of this build last night and ran out of energy and will by the time I got off work lol ended up just taking a 5 core I had already made and paralleling with another 28g core. maybe tonight I'll get home early enough to do a proper 6 core. very nice job on the build man! I'm way out of practice on aliens, hell never was in practice really.

Sent from my SM-G955U using Tapatalk
 

Shredtravolta

VU Donator
Silver Contributor
Member For 4 Years
Unlisted Vendor

Shredtravolta

VU Donator
Silver Contributor
Member For 4 Years
Unlisted Vendor
was planning to make an N80 version of this build last night and ran out of energy and will by the time I got off work lol ended up just taking a 5 core I had already made and paralleling with another 28g core. maybe tonight I'll get home early enough to do a proper 6 core. very nice job on the build man! I'm way out of practice on aliens, hell never was in practice really.

Sent from my SM-G955U using Tapatalk
IMO opinion once you get past the basic principals of aliening the main factors become your stretch and consistent tension on the cores with the binding decore. If your tension is all over the place your binding will be too. That's what I mainly focus on. But yeah, @chrisakasparky is one hell of an alien maker.:)
 
Last edited:

Shredtravolta

VU Donator
Silver Contributor
Member For 4 Years
Unlisted Vendor
Now that I think about it, they might actually perform better with smaller ribbon. I have some 0.2 that I might try. I think the one I pictured is 0.5
I actually ordered .2 ribbon (a relatively small amount) because that's how Ndevine83 did it in his tutorial. IMO the vape still wasn't great. I mean it is vapable. I just can't see anyone preffering it over an alien coil, or a framed staple, or even a fused clapton to be honest.
 
Last edited:

CrazyChef v2.0

Gold Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Reddit Exile
VU Patreon
Baggies within baggies for alien decore organization and protection protocol

View attachment 115618
I keep mine hanging on a curtain rod attached to the wall. I put some masking tape on the bar to keep them from slipping off.

PcGSUD3.jpg
Here's a better pic. You can easily fit over 100 decores in a very small space this way. When I have more than 2 types (that's all my brain can remember), I'll put a sticky note on the wall behind it saying what they are.

5X7mBQi.jpg
 

BoostedTrini

Member For 4 Years
Very cool shred! Congrats

Always wondered if tsukas spit badly let me know your thoughts :cheers:
I've built Tsukas with 0.3 as the wrap. It isn't as good as a 3 core Alien but the flavor wasn't bad by any means. The issue was the cotton was center burning after a day or two of use and after 3 re-wicks the flavor was non existent. As a coil that'll be worth the build I won't recommend them.
 

BoostedTrini

Member For 4 Years
A little update on my quad core Alien testing. The quad 28/36 Aliens perform better than my small Alien Framed Staples(6-.3 30g Framed), better than triple 28, 27 and even 26 at the 120-130 mark. They aren't as smooth as the Alien Framed Staples or even the triple cores but the vape has more "depth" to it. Flavor has more of a full body to it, if that makes sense. So far I'm testing them in NI80 and SS316L...same spec for both.
 

Shredtravolta

VU Donator
Silver Contributor
Member For 4 Years
Unlisted Vendor
A little update on my quad core Alien testing. The quad 28/36 Aliens perform better than my small Alien Framed Staples(6-.3 30g Framed), better than triple 28, 27 and even 26 at the 120-130 mark. They aren't as smooth as the Alien Framed Staples or even the triple cores but the vape has more "depth" to it. Flavor has more of a full body to it, if that makes sense. So far I'm testing them in NI80 and SS316L...same spec for both.
I would suggest trying a single coil build. I'm a sole mech mod user, but my favorite vape is a larger Alien Framed Staple done with at least 6plys of .5 ribbon. I like 26g frames and 36-38 alien binding. You could take that decore off 24-26g depending on how wavy you want the wraps to be and what your comfort level is in terms of stretch. I just find that with the larger Alien Frames Staples you get more depth that if you were to use .3 ribbon for example. The build I'm suggesting comes out to about .12 - .14 using N80 and about .08 - .10 using stainless steel. Only a suggestion. I've tried making four and five core aliens also and they do vape great as well.
 

Carambrda

Platinum Contributor
ECF Refugee
Member For 5 Years
A little update on my quad core Alien testing. The quad 28/36 Aliens perform better than my small Alien Framed Staples(6-.3 30g Framed), better than triple 28, 27 and even 26 at the 120-130 mark. They aren't as smooth as the Alien Framed Staples or even the triple cores but the vape has more "depth" to it. Flavor has more of a full body to it, if that makes sense. So far I'm testing them in NI80 and SS316L...same spec for both.
At 4.5 wraps, 2.5mm ID, dual coil on a single battery mech is where triple 27/36 Ni80 aliens are king of the hill for me. It is still a smooth vape, but not so smooth that it flattens out the nice soft texture feel... so IMO it is a lively vape as opposed to an anemic one, and, as for the flavor yes of course you can bet both shoes on that it makes all the perfect sense in the universe to always want a full body instead of an empty one. :)
 

mojo21

Member For 1 Year
Looks great! A lot of us do one coil worth of decore at a time, nothing wrong with that. I use a little clothespin to start my second decore in the middle of a stick.
And yea that same build will have lower ohms so more power. If it’s too much you can add a wrap.
Also, if you’re running a mod with one battery, be careful. 0.20 ohms is right at the amperage limit of a single good 18650 on a mech mod.
I didn't no that. Thx for the tip

Sent from my SM-G955W using Tapatalk
 

mojo21

Member For 1 Year
was planning to make an N80 version of this build last night and ran out of energy and will by the time I got off work lol ended up just taking a 5 core I had already made and paralleling with another 28g core. maybe tonight I'll get home early enough to do a proper 6 core. very nice job on the build man! I'm way out of practice on aliens, hell never was in practice really.

Sent from my SM-G955U using Tapatalk
Very nice

Sent from my SM-G955W using Tapatalk
 

mojo21

Member For 1 Year
Thx for ur review. I myself seem to like the alien 3 core over the framed staple so far but I've only tried one once. It was .4 ×6- 26 frame wrapped with 36
A little update on my quad core Alien testing. The quad 28/36 Aliens perform better than my small Alien Framed Staples(6-.3 30g Framed), better than triple 28, 27 and even 26 at the 120-130 mark. They aren't as smooth as the Alien Framed Staples or even the triple cores but the vape has more "depth" to it. Flavor has more of a full body to it, if that makes sense. So far I'm testing them in NI80 and SS316L...same spec for both.

Sent from my SM-G955W using Tapatalk
 

mojo21

Member For 1 Year
My first try at stitched alien. Out of 8 inches of stick, I managed this coil hehe. Maybe a smaller decore next time.
2x30g, 12x.3R, 36g/40g
All N80, 3mm id, .14 ohms
74a71136481199c6609429cb2a31a7c2.jpg
Pretty nice for a first shot bro. ! I'm just trying to do my first frame staple and it freaking hard to set up ! I've been trying the raymo way and it's just not working out . Any idea if his videos is posted anywhere so I can watch it again ?

Sent from my SM-G955W using Tapatalk
 

zephyr

Dirty Pirate Meg
VU Donator
Gold Contributor
Member For 4 Years
Unlisted Vendor
My first try at stitched alien. Out of 8 inches of stick, I managed this coil hehe. Maybe a smaller decore next time.
2x30g, 12x.3R, 36g/40g
All N80, 3mm id, .14 ohms
74a71136481199c6609429cb2a31a7c2.jpg

You got a whole coil your First Try??? That's rad. I think all I got my first try was a bunch of wire gnarls and a full swear jar
 

chrisakasparky

Silver Contributor
Member For 4 Years
Pretty nice for a first shot bro. ! I'm just trying to do my first frame staple and it freaking hard to set up ! I've been trying the raymo way and it's just not working out . Any idea if his videos is posted anywhere so I can watch it again ?

Sent from my SM-G955W using Tapatalk

Definitely do the looped ribbons for your first staple imo. You cut ribbons twice as long as you want and half as many and then bend them in half in a u shape. It’s waaaay easier to stack ribbon with the loop I think. Try to find a video maybe.
af168506b546705ce46a3f6e6ec4f9dc.jpg

The one on the left
 

VU Sponsors

Top