Become a Patron!

High End Mech's

Hanson

Member For 4 Years
Pilak Tycoon is certainly high end. Don't laugh at the recurve on top, its got crazy good flavor.

tycoon.jpg

Whata scary stack of macs u got


Sent from my iPhone using Tapatalk
 

PaulS

Gold Contributor
Member For 5 Years
So now I have a Slam, Grip and Dominus. I traded away my Sidewinder stack - it was just too damn big.

If I hate to rate them all it would be hard. Slam has virtually no voltage drop. My god. But it is thicker by far than the Grip and the voltage drop on the Grip is very close ... Grip is a bit taller. Problem is Slam needs a big atomizer and for me most big attys are too airy. Dominus can handle very low builds - was surprised by that. Can be used in cloud comps where stacks are not legal.Now the Sidewinder stack was a beast. I like stacks but this was just too much even for me.

I am really enjoying side fires these days. Gonna get me a Brizo next! Funny thing. I keep hittoing the bottom of the tube with my fingers - just a learnt response lol. I have to break the habit ... well it is kind of funny when my tube does not fire.
 

Pony Tail

Bronze Contributor
Bronze Contributor
Member For 1 Year
So now I have a Slam, Grip and Dominus. I traded away my Sidewinder stack - it was just too damn big.

If I hate to rate them all it would be hard. Slam has virtually no voltage drop. My god. But it is thicker by far than the Grip and the voltage drop on the Grip is very close ... Grip is a bit taller. Problem is Slam needs a big atomizer and for me most big attys are too airy. Dominus can handle very low builds - was surprised by that. Can be used in cloud comps where stacks are not legal.Now the Sidewinder stack was a beast. I like stacks but this was just too much even for me.

I am really enjoying side fires these days. Gonna get me a Brizo next! Funny thing. I keep hittoing the bottom of the tube with my fingers - just a learnt response lol. I have to break the habit ... well it is kind of funny when my tube does not fire.

LOL I'd probably do the same thing. I'd be looking at the mod sideways ... I've heard of airy but this is ... oh ... then start calling myself names.
 

CrazyChef v2.0

Gold Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Reddit Exile
VU Patreon
The Purge Money Shot on an MCV Kingpin. I think these two are brothers from another mother - they go perfectly together! Extremely hard hitting - I may just retire the Slam Piece before it even gets here!

ofhAHaO.jpg
 

CashNVape

Gold Contributor
Member For 4 Years
So Pinoy Mod's like the Sith aren't high end?

Here, if you wanna go top of the line try a couple 2JNT Pilak's even though I'm shooting for high end not just top shelf.

75c1449d5e73e4c46c55581014533dbf.jpg


Sent from my K88 using Tapatalk
Damn I want that 2jnt on the left

Sent from my SM-G930V using Tapatalk
 

jwill

The Great King of Nothing
VU Donator
Platinum Contributor
Member For 2 Years
VU Challenge Team
Reddit Exile
VU SWAT
I know nothing about this mod but traded for it anyway ...

jcq3tJ4.jpg
Looks like a crazy cheese grater. How well does that thing work?
 

jwill

The Great King of Nothing
VU Donator
Platinum Contributor
Member For 2 Years
VU Challenge Team
Reddit Exile
VU SWAT
Looks like a crazy cheese grater. How well does that thing work?

Maybe the picture makes it look bigger than it is but I thought it was a stack with an option for a 3rd. Am I mistaken?
 

jwill

The Great King of Nothing
VU Donator
Platinum Contributor
Member For 2 Years
VU Challenge Team
Reddit Exile
VU SWAT
It is a solid stack tube and a solid single tube. You put the button on either.

Its a good looking mod. I like the punisher design.
 

r055co

VU Donator
Platinum Contributor
Member For 4 Years
I just ordered the same setup in black. Kennedy says it will ship today! I can’t wait. :)
Yeah I just pulled the trigger on the Black with the Black RDA myself. The FDA talking shit about an Internet ban has me nervous.

Sent from my HTC 10 using Tapatalk
 

EMusic

Gold Contributor
Member For 3 Years
Member For 2 Years
I have a feeling that the internet ban won’t happen. I just hope I’m right!

And congrats on your purchase. I can’t wait to see how it vapes! :xD:
 

r055co

VU Donator
Platinum Contributor
Member For 4 Years
I have a feeling that the internet ban won’t happen. I just hope I’m right!

And congrats on your purchase. I can’t wait to see how it vapes! :xD:
And I hope I'm wrong but with what they've been saying I don't believe I am.

Sent from my HTC 10 using Tapatalk
 

EMusic

Gold Contributor
Member For 3 Years
Member For 2 Years
My Kennedy setup is arriving tomorrow! :) My battery is coming from Liion by Saturday at the latest (I decided on the Samsung 30t).
 

r055co

VU Donator
Platinum Contributor
Member For 4 Years
How much larger is that 30t to a 20700 battery?

Sent from my SM-G930V using Tapatalk
The 30T is a 21700 so it's 1mm wider and will not fit in the Vindicator 20700.

The best hitting 20700 is the Molicel per Mooch
"Bench Test Results: Molicel INR20700A 35A 2800mAh 20700...the five “leg” battery rewrapped by many

Bottom Line: This is the five “leg” top contact 20700 that was rewrapped by so many companies earlier this year. It is a true 30A cell that is the best choice for over 25A use since the Sanyo NCR20700A and NCR2070C are not available anywhere."
https://www.imrbatteries.com/oem-inr20700a-20700-3000mah-30a-battery/

I've got a few of them, they're great. iJoy (not any longer though) and Vapcell have been using them. But I'm very leary of rewraps for you never know when they will change batteries and when they do there is zero notification (like iJoy just did). So I like going with the source
 

CashNVape

Gold Contributor
Member For 4 Years
The 30T is a 21700 so it's 1mm wider and will not fit in the Vindicator 20700.

The best hitting 20700 is the Molicel per Mooch
"Bench Test Results: Molicel INR20700A 35A 2800mAh 20700...the five “leg” battery rewrapped by many

Bottom Line: This is the five “leg” top contact 20700 that was rewrapped by so many companies earlier this year. It is a true 30A cell that is the best choice for over 25A use since the Sanyo NCR20700A and NCR2070C are not available anywhere."
https://www.imrbatteries.com/oem-inr20700a-20700-3000mah-30a-battery/

I've got a few of them, they're great. iJoy (not any longer though) and Vapcell have been using them. But I'm very leary of rewraps for you never know when they will change batteries and when they do there is zero notification (like iJoy just did). So I like going with the source
I just have two joy 20700s they don't hit as hard as a vtc5a lol

Sent from my SM-G930V using Tapatalk
 

r055co

VU Donator
Platinum Contributor
Member For 4 Years
I just have two joy 20700s they don't hit as hard as a vtc5a lol

Sent from my SM-G930V using Tapatalk
That's why I really love the Samsung 30T's, they're awesome! But if your mod won't fit 21700's the Molicel are currently the best option.
 

CashNVape

Gold Contributor
Member For 4 Years
That's why I really love the Samsung 30T's, they're awesome! But if your mod won't fit 21700's the Molicel are currently the best option.
I grabbed the purge slam from the for sale section of the forum. If the 30t works with that mod & my efest lux 6 charger will charge the 30t than I'll buy a few.

Sent from my SM-G930V using Tapatalk
 

r055co

VU Donator
Platinum Contributor
Member For 4 Years
I grabbed the purge slam from the for sale section of the forum. If the 30t works with that mod & my efest lux 6 charger will charge the 30t than I'll buy a few.

Sent from my SM-G930V using Tapatalk
Shouldn't be an issue, 21700 and 20700 don't have an issue with my chargers, they're the Opus 3100 and Nitcore. Now the mod I can't comment about for I don't have a Purge. For the money of a Purge I prefer to spend that on Pilak's ;)
 

CashNVape

Gold Contributor
Member For 4 Years
Shouldn't be an issue, 21700 and 20700 don't have an issue with my chargers, they're the Opus 3100 and Nitcore. Now the mod I can't comment about for I don't have a Purge. For the money of a Purge I prefer to spend that on Pilak's ;)
It's a clone lol
I want a pilak bad. I don't normally buy clones anymore but the price of the purge it's worth it to at least try it out!

Sent from my SM-G930V using Tapatalk
 

r055co

VU Donator
Platinum Contributor
Member For 4 Years
It's a clone lol
I want a pilak bad. I don't normally buy clones anymore but the price of the purge it's worth it to at least try it out!

Sent from my SM-G930V using Tapatalk
Clones serve their purpose, for me their purpose is to get an general idea before pulling the trigger on the high end gear. Most generally this works out as long as you keep in mind that Clones of high end gear are usually sub par.

I know Purge have a very loyal following and I'm not really out to bash. But IMO way to much money for the hype ya know. For the cost get a Pilak, pure silver and superb machining and quality the purge equivalent is fucking $3k, obscene ya know .

Now Purge's intro level which would be the B2B just get a Kennedy, Kennedy's IMO are the best balance of quality and price available.

My two bits for what it's worth.
 

EMusic

Gold Contributor
Member For 3 Years
Member For 2 Years
And simply some of the best machining and quality metal there is ;)
Absolutely. The threads are butter-smooth and the machining and cerakoting of the mod and RDA are just phenomenal. Flavor and vapor production are top-notch. I give my setup an easy 10/10.
 
Last edited:

Carambrda

Platinum Contributor
ECF Refugee
Member For 5 Years
I'd take that over a purge any day. If it's 24mm of course

Sent from my SM-G930V using Tapatalk
He is obviously just trolling you because... well, for starters there exists no "$3k equivalent from Purge", and, secondly, the fact he had to re-re-re-explain that he isn't bashing Purge is what gave himself away, especially in view of the fact Mooch measured the voltage drop of both the brass and the copper Admiral (which is what? $130 right now vs $420 for the pure silver Pilak Supremo 24) at 30 amps... the difference between the two different metal types (brass vs copper) in this particular instance translates to like only .03 watts added (i.e., .008V×30A=.24W brass vs .007V×30A=.21W copper) so good luck trying to feel the difference by vaping between 1/ the copper Purge Mods Back To Basic V2 with a silver spring and a solid silver firing pin installed in it and 2/ the pure silver Pilak Supremo 24. That said, of all the tube mechs that I own, of the ones that aren't Purge Mods, 11 of them were more expensive than the combined cost of both the copper B2B and the optional silverwork that goes with it. I don't mean to be crass or anything, but I'll add that I own a few mech setups each one of which is worth double the price of the pure silver Pilak, and, just the shipping and duty fee plus European tax that goes in addition to VAT (so I'm not talking about the VAT here) for the specific part of my mech mod collection that specifically is made in the USA was way, WAY more than the price of the pure silver Pilak. Trump knows I'm boosting the US economy. :D
 

VU Sponsors

Top