Become a Patron!

Wotsit Challenge 8 prizes available (closes on 12-21-2018)

Status
Not open for further replies.

Vape Fan

_evil twin_
Staff member
Senior Moderator
VU Donator
Platinum Contributor
Press Corps
Member For 5 Years
I mean, this picture you can see particulate on the glass section, lint etc.
I guess a tank makes more sense than RDA. You think the dark area behind the hook is part of a build deck? Just lighting? And juice is maginfying the milling striations of build deck? Could be sub-ohm and the dark behind the hook is a coil, I think I see a wicking port there in the eye of the hook. Looking like it has a sleeve either way.

Asprire had a lot of sleeves so I'll eliminate 1 of them ,,, because the pic looks more copper/brass than silver, maybe lol
Wotsit # 41
Aspire Atlantis
 

Vape Fan

_evil twin_
Staff member
Senior Moderator
VU Donator
Platinum Contributor
Press Corps
Member For 5 Years
Wotsit #41 Aspire Nautilus

If nothing more, maybe we'll get more info outs these guesses :)
 

~Don~

Platinum Contributor
Member For 5 Years
I guess a tank makes more sense than RDA. You think the dark area behind the hook is part of a build deck? Just lighting? And juice is maginfying the milling striations of build deck? Could be sub-ohm and the dark behind the hook is a coil, I think I see a wicking port there in the eye of the hook. Looking like it has a sleeve either way.

Asprire had a lot of sleeves so I'll eliminate 1 of them ,,, because the pic looks more copper/brass than silver, maybe lol
Wotsit # 41
Aspire Atlantis

I think the barrel/chamber is gold rather than copper, since copper is sort of bad to have mixed with many juices.
 

~Don~

Platinum Contributor
Member For 5 Years
Remember, a lot of the pictures are on VU... like the Nookie V3 earlier...its on the first page first post of "High end mechs"... not saying this one is...and yeah that is a lot of photos to go through on the RTA Sub lol

EDIT: but one thing for sure, is when you use the Windows Snippet tool and copy pasta it, it will always put the VU sig in the pic ;)
 

~Don~

Platinum Contributor
Member For 5 Years
Tangent:

while going page by page I came across something I need to mug F1r3b1rd of

upload_2018-12-5_15-28-58.png

NarDa! lol
 

Tornadoalleydeb

Vaping whilst slaying dragons in the land of Tyria
VU Donator
Gold Contributor
ECF Refugee
Member For 5 Years
VU Patreon
Wotsit #41
Merlin RDTA Or Tesla Steampunk mod?
 
Last edited:

f1r3b1rd

https://cookingwithlegs.com/
Staff member
Senior Moderator
VU Donator
Diamond Contributor
VU Challenge Team
Member For 5 Years
VU Patreon
Hint:
Not an RDA
 

jwill

The Great King of Nothing
VU Donator
Platinum Contributor
Member For 2 Years
VU Challenge Team
Reddit Exile
VU SWAT
Nobody? We are still on the easy ones. You should have this, there are some very revealing clues in the last dozen or so posts, and a certain someone might be trying to steer you all to the correct answer. Just sayin'.
 

Letitia9

Citrus Junkie
VU Donator
Platinum Contributor
Member For 4 Years
VU Challenge Team
Seriously...So619Cal pretty much spoon fed you the answer.
 

MrMeowgi

The Vapin' Drummer
VU Donator
Diamond Contributor
Member For 4 Years
Will be searching that thread when I get home. A lot of work I feel like.

Sent from my LM-Q610(FGN) using Tapatalk
 

f1r3b1rd

https://cookingwithlegs.com/
Staff member
Senior Moderator
VU Donator
Diamond Contributor
VU Challenge Team
Member For 5 Years
VU Patreon
Yes, a lot of hints it seems on this one, but is there a red herring in the mix?
Nope; no fish....
especially not those fishes.
 

~Don~

Platinum Contributor
Member For 5 Years
Ok for those that are online for this challenge, I Pm'd firebird to confirm.

This hint is a solid one ;)

0.740753 Ounces
 

f1r3b1rd

https://cookingwithlegs.com/
Staff member
Senior Moderator
VU Donator
Diamond Contributor
VU Challenge Team
Member For 5 Years
VU Patreon
Wotsit #42
F6C01651-72FD-474C-83A1-4D39100F6C32.jpeg
 

Tornadoalleydeb

Vaping whilst slaying dragons in the land of Tyria
VU Donator
Gold Contributor
ECF Refugee
Member For 5 Years
VU Patreon
#42 didn't we have this one? Or is it different? :) :) CTHULHU GAIA RDTA
 

MrMeowgi

The Vapin' Drummer
VU Donator
Diamond Contributor
Member For 4 Years
I have never seen one of those but gosh it's pretty
It is. Man I was stuck on Matt hagerman engravings. Could've sworn it was a mech mod until the hints started coming in

Sent from my LM-Q610(FGN) using Tapatalk
 

Tornadoalleydeb

Vaping whilst slaying dragons in the land of Tyria
VU Donator
Gold Contributor
ECF Refugee
Member For 5 Years
VU Patreon
#42 Orchid V4 and agreed this could be a LOT of tanks :)
 

MrMeowgi

The Vapin' Drummer
VU Donator
Diamond Contributor
Member For 4 Years
Logo on left. Lip on top seems to stick out a bit from the glass. I'm gonna say 30mm

Sent from my LM-Q610(FGN) using Tapatalk
 

Tornadoalleydeb

Vaping whilst slaying dragons in the land of Tyria
VU Donator
Gold Contributor
ECF Refugee
Member For 5 Years
VU Patreon
#42 one last guess then gotta go Modfather 30mm RTA lol
 

~Don~

Platinum Contributor
Member For 5 Years
Logo on left. Lip on top seems to stick out a bit from the glass. I'm gonna say 30mm

Sent from my LM-Q610(FGN) using Tapatalk

I didn't even catch that...first thing that isn't so obvious for me was that it might be bottom fill... I don't see a separation point on the top.

But from the pic I am sure you're right about it being glass... to clear to be PC imo.
 

f1r3b1rd

https://cookingwithlegs.com/
Staff member
Senior Moderator
VU Donator
Diamond Contributor
VU Challenge Team
Member For 5 Years
VU Patreon

Huckleberried

VU Donator
Diamond Contributor
Member For 5 Years
VU Patreon
I didn't even catch that...first thing that isn't so obvious for me was that it might be bottom fill... I don't see a separation point on the top.

But from the pic I am sure you're right about it being glass... to clear to be PC imo.
That's why I was thinking "pressure fit". Lemo is a bottom fill, has kinda sharp edges. Sharp enough to cut my finger, at least. I will say, the top cap does look shorter than the Lemo, so I figured my guess to be wrong.
 

~Don~

Platinum Contributor
Member For 5 Years
That's why I was thinking "pressure fit". Lemo is a bottom fill, has kinda sharp edges. Sharp enough to cut my finger, at least. I will say, the top cap does look shorter than the Lemo, so I figured my guess to be wrong.

I have no idea what it is yet...spitballin with you guys on this one...

and I know this is going to sound stupid... like Derpy derp derp stupid lol

but the "Drip tip" part (thats the derpy sounding part LOL) I think is the drip tip and not a ledge... coloring hue is slightly "Brighter" has a sheen to it, and not the dull sheen the top of the tank section has..
 

~Don~

Platinum Contributor
Member For 5 Years
also lets say for SaGs ( Shits and Giggles) that is the drip tip...

Guessing its a 510 drip tip...which generally are 10-12mm in diameter, this would make this RTA a 22mm...

What also has me believe that is actually the drip tip and not a ledge for a DT is the tiniest light gap you can see where said DT/ledge meets the top cap on the right side
 

~Don~

Platinum Contributor
Member For 5 Years
I'll be back later, soup and sammich time... to cold for San Diego lately brr 62*
 
Status
Not open for further replies.

VU Sponsors

Top