Occasionally I use VG or even a touch of Corn Starch to allow the decore to slide smoothly.I've heard of some folks using nitrile gloves. @VAPEROXX or @Pegleg Meg any hints?
Sent from my SM-G965U using Tapatalk
Occasionally I use VG or even a touch of Corn Starch to allow the decore to slide smoothly.I've heard of some folks using nitrile gloves. @VAPEROXX or @Pegleg Meg any hints?
Well I had a couple of goes this morning on the Aliens with Ni80 28*2/36 and the first attempt was a complete fail.
View attachment 122256
My second attempt seemed so much better but due to having dry skin through plastering the 38 just wouldn't slip through my fingers well enough and started to annoy me and I didn't get far enough to make one full coil
View attachment 122257
But in all honesty I would be happy enough to vape with it
View attachment 122258
I could do with something that I could hold between my fingers that would let it pass through well enough and keep the tension there.....anyone got any suggestions?
I've heard of some folks using nitrile gloves. @VAPEROXX or @Pegleg Meg any hints?
Built this tonight... first attempt at anything like this... not as tight as I would like and I goofed the spacing a couple of times, but I'm happy with it for a first attempt... it vapes amazingly well!!
Twisted 28g framing .5 ribbon x5 and helixed with 38g... would probably helix with a slightly bigger wire next time.
Ohms at .14 as a single
View attachment 122792
Well my third practice on the aliens and they've come out a little better. Just going to keep at it when I'm allowed 5 minutes to myself.....
Very nice!My first attempt at the alien... managed to get enough for a 6 wrap out of 12'' of wire... lol
38g SS316 over 28g SS316
View attachment 122987
You'd be surprised just how true this statement is. Once you get the basics down, you'll be able to make aliens with the drill going full speed.We'll get there one day bro and we will be knocking them out really fast and perfect!
Many thanks to you all especially @Pegleg Meg for telling me to use a 30g for the decor as it was really easy. My fifth attempt because the dog came in for a nosey on my fourth. They just need straightening out once my nylon pliers eventually arrive.
Nice job!!!Many thanks to you all especially @Pegleg Meg for telling me to use a 30g for the decor as it was really easy. My fifth attempt because the dog came in for a nosey on my fourth. They just need straightening out once my nylon pliers eventually arrive.
If that was all SS316L @MannyScoot; it would ohm at .07. Nice try...A triple ohming at .13 all stainless steel (3) core......(3)28g SS 316L/36g SS
Sent from my Pixel 2 XL using Tapatalk
Kanthal comes in right at that resistance. NOT SS316L...A triple ohming at .13 all stainless steel (3) core......(3)28g SS 316L/36g SS
Sent from my Pixel 2 XL using Tapatalk
Well then My Boxer DNA 250c is screwed up.... Because that's what it shows.....Kanthal comes in right at that resistance. NOT SS316L...
http://vapingunderground.com/threads/wts-wtt-aspex-performance-coils.434798/
Then it's not SS316L brother. I've done the math every which way. Not possible to get that resistance from those coils in SS316L.Well then My Boxer DNA 250c is screwed up.... Because that's what it shows.....
Sent from my Pixel 2 XL using Tapatalk
They work in temp control correct.... And the material colors blue like stainless And I get (6) pairs for $10 bucks.....Then it's not SS316L brother. I've done the math every which way. Not possible to get that resistance from those coils in SS316L.
http://vapingunderground.com/threads/wts-wtt-aspex-performance-coils.434798/
That's .13 ohms each. And as unreliable coil builders usually do, or should I say, DON'T, they don't specify SS316L, SS317, SS430, etc. You might rethink from whom you purchase your coils...just trying to help ya. And those are 5.5 wraps. Not 6.They work in temp control correct.... And the material colors blue like stainless And I get (6) pairs for $10 bucks.....
So for me they are sufficient...... Specially the way I go through coils.... The box is so you can see the dimensions of the wire.......
Sent from my Pixel 2 XL using Tapatalk
I'm really curious as to how you're getting 0.13Ω off of 3 coils when they're rated 0.13Ω each.They work in temp control correct.... And the material colors blue like stainless And I get (6) pairs for $10 bucks.....
So for me they are sufficient...... Specially the way I go through coils.... The box is so you can see the dimensions of the wire.......
Sent from my Pixel 2 XL using Tapatalk
Yeah that's what I'm thinking now ?I'm really curious as to how you're getting 0.13Ω off of 3 coils when they're rated 0.13Ω each.
Kanthal comes to exactly .13 when run in triple 5.5 wrap Alien configuration.Yeah that's what I'm thinking now ?
Sent from my Pixel 2 XL using Tapatalk
They are in the Triple....Yeah that's what I'm thinking now ?
Sent from my Pixel 2 XL using Tapatalk
Great call Chef!Hold a magnet to one of the coils.
For SS316L Aliens, 5.5 wraps, 3mm ID...I'll build you 6 coils for that. Just for science.(6) coils $10 bucks and I'll get them from you......
Sent from my Pixel 2 XL using Tapatalk
That should tell you something right there.I usually get 24 coils a month....
Yeah. Normally my Alien coils are $8 per pair...That should tell you something right there.
When mine get dirty I put new ones in....I had a pair of aliens in the Scottua for over 6 months before I sold it.
Dude, that's like buying a new shirt every time one gets dirty.When mine get dirty I put new ones in....
That's why I get them fairly priced....
Ok make me 24..... Where do I pay you.....For SS316L Aliens, 5.5 wraps, 3mm ID...I'll build you 6 coils for that. Just for science.
http://vapingunderground.com/threads/wts-wtt-aspex-performance-coils.434798/
I tried cleaning and burning and brushing and straight and push and pull......Ok make me 24..... Where do I pay you.....
Sent from my Pixel 2 XL using Tapatalk
PM sent.Ok make me 24..... Where do I pay you.....
Sent from my Pixel 2 XL using Tapatalk
Yeah, a lot of people put far too much effort into cleaning their coils. I just pull out the wick, dry burn the coil and blow off the residue, re-wick and I'm good. Like I said, one set of coils lasted over 6 months doing only this.I tried cleaning and burning and brushing and straight and push and pull......
I like just loosening screws and tighten them with new....
Bada bim Bada Buum.......
Sent from my Pixel 2 XL using Tapatalk
Everyone put in an order and support a builder...... I just ordered 24The coils I'll send you will clean easily. 24 should last a loooong time.
http://vapingunderground.com/threads/wts-wtt-aspex-performance-coils.434798/
And the material colors blue like stainless
If I built you 3mm 5.5 wrap SS316L Alien coils, you couldn't run em on that DNA 250C I'm pretty sure...
http://vapingunderground.com/threads/wts-wtt-aspex-performance-coils.434798/
I just put it on several g classes and in several DNA mods and they all read@MannyScoot I wonder, did you have a different tank, with dual coils, on the Boxer before the Triple, and locked the ohms before you swapped tanks?
Have you seen the cores color up, or just the 36g alien wrap?
I just put it on several g classes and in several DNA mods and they all read
.13
I saw the entire coil turn blue..... All of it...... And the builder guarantee me it is 100 % SS 316L wire
Sent from my Pixel 2 XL using Tapatalk
Then he lied to you. Or he's using subpar SS316L. You cannot change the physical properties of an alloy without making a separate alloy.I saw the entire coil turn blue..... All of it...... And the builder guarantee me it is 100 % SS 316L wire