f1r3b1rd
https://cookingwithlegs.com/
Staff member
Senior Moderator
VU Donator
Diamond Contributor
VU Challenge Team
Member For 5 Years
VU Patreon
I received this combo directly from wismec for the purposes of this writing. The following is merely an account of my experience; and opinion, over the previous weeks. The mod is available in several different colors.
The specs for the surface squonk box are:
o Size: 78*43.5*25.5mm
o Weight: 131.8g
o Thread type: 510 spring loaded connector
o E-liquid bottle capacity: 6.5ml
o Cell type: high-rate 18650 cell (discharging current should be above 25A)
o Output mode: VW/Bypass/TC-Ni/TC-Ti/TC-SS/TCR mode
o Output wattage: 1-80W
o Resistance range: 0.05-3.5ohm
o Output voltage range: 0.5v-9v
The kit contents are:
o 1 - WISMEC LUXOTIC SURFACE
o 1 - Glass Tube
o 2- User Manual
o Spare Parts
o 1 - KESTREL rdta
o 1 - Mesh Heater
o 1 - Warning Card
o 2 - E-liquid Bottle
o 1 – Cotton
The luxotic is the smallest regulated squonk box that I’ve ever used, personally. I cant say that it’s the smallest to exist, but it is certainly the smallest I’ve come across. It is exceptionally comfortable to hold and use, its in the hand nicely, and very pocketable. It is an 80w squonkmod.
It has all the safety features one would expect with a regulated mod, making it excellent for beginners or those its safety in the forefront.
o Temp protection
o Over discharge protection
o Reverse polarity
o 10s cutoff
o Short circuit protection
o Over current protection
For having such a small screen, Im impressed with the boards features and abilities.
o You can lock the adjustment buttons by pressing both up and down simultaneously
o Pressing the fire button three times lets you cycle between power , bypass mode and temp modes (in,ss, tcr, ti)
o Holding up and fire brings you to a general menu allowing you to change the sub parameter, adjust power boost duration and amount, stealth mode, sleep mode and view battery voltage.
o In temp mode, if you click the fire button 4 times you can cycle whether you are adjusting power or temperature.
o The mod adjusts in . 1 watt increments up to 20w and then 1 watt increments up to 80w and does not round Robbin
The mod will hold a 25mm rda flush; but, cosmetically it still looks very nice with a 22mm atty. The squonk hole is conveniently placed on the battery door. The door does have three magnets on it, 2 of which bind to the battery the third, and larger one, attaches to the metal plate housing the board. The mod body is built of what appears to be aluminum, the door is made of a resin plastic. The underside has a removable plate for removing the squonk bottle, and is attached via magnets. This brings up a downside, as I’ve noticed that while depressing the squonk bottle the bottom plate tends to want to protrude, reducing the pressure applied to the bottle. Some much stronger magnets or a clip, could solve this issue. I typically hold the mod with my pinky under the base, so this does not affect me much, but I would be remiss not to mention it.
The squonk bottle attaches to the mod via a drop down metal tube, this renders you unable to use after market bottles. I know many people have issues with proprietary bottles; however, these are a very nice silicon and share many of the same characteristics as my lost vape bottles. The biggest downside for me with the bottles is that they only hold 6.5ml of liquid. Plenty for their size, but. Like most people, I always want more.
How does it vape you may be wondering. It vapes well. Extremely well. The tc is fairly accurate and easy to use from my experience. I highlight experience as I do not have the equipment to accurately test the tc; but as an avid fan of the dna, this held its own for me. Ramp up time in power mode was more than efficient and it hit very nice for all the settlings I’ve tried. With a single Clapton build on my citadel at 60w, I also got ether vape time on a single battery than I expected. I did notice s well that squonking into an rda alleviated the bottle movement that I experienced with the RDTA. I cant state enough how nice the performance of this device is, especially at its price point. Ive been more than happy with the avatar board, it has plenty of on board options for the finicky and expeditious power delivery for those that just want to click and vape.
Overall my impressions of this device has been fantastic. This mod will certainly remain a nice grab and go mod for errands. It’s efficient, comfortable and provides an amply satisfactory vape. It is also durable, and has survived several drop tests, both off my deck onto the driveway; as well as, out the door of the truck onto pavement.
The comfort of the small device coupled with its power capabilities, make it a contender for me in the world of single battery regulated squonk devices. Ive had no issues with anything leaking. Barring the bottom door needing a stronger magnet, I have nothing ill to say of the device. Since I hold the mod In such a way that this does not happen, it works out perfect for me as a tiny little powerhouse squonker.
Pros
o Small size
o 80w on single battery
o Lots of features
o Good with tc
o Easy straight forward menu
o 1 watt increments above 20w
o .1 watt increment below 20w
o Silicon bottle
Cons
o Bottom plate has potential to move when squonked
o Door uses battery as anchoring point (could be or not. Personally not an issue for me)
o Not available in solid color (opininon)
Last edited: