Become a Patron!

High End Mech's

jwill

The Great King of Nothing
VU Donator
Platinum Contributor
Member For 2 Years
VU Challenge Team
Reddit Exile
VU SWAT
Well got my mech I always wanted. Made here in Edmonton Alberta.

What a beauty.

a790b082d40a0597bb92785a5e30aaa1.jpg
4ea400a7a4c1563ef7d324f17856546b.jpg
73dae0ce797cc79f3ce56e0078802101.jpg


Sent from my SM-G975W using Tapatalk


Nice. Those are bad ass.
 

R.Savage

Bronze Contributor
Member For 4 Years
Just fired up the 3sixty. Man that button. Those magnets are heavy duty. I had to adjust the delrin piece that is located on the switch. Seems to be firing ok. Running a dual coil on the m41 with the 3sixty ohm is 0.22 at 4.2 volts roughly 18.2 amps.

Really loving this mech.
c940e3ff957fa214ddaeea8e94065faa.jpg
42108a1dce4ee659876746f876484c84.jpg


Sent from my SM-G975W using Tapatalk
 

dhomes

Silver Contributor
Member For 4 Years
Just fired up the 3sixty. Man that button. Those magnets are heavy duty. I had to adjust the delrin piece that is located on the switch. Seems to be firing ok. Running a dual coil on the m41 with the 3sixty ohm is 0.22 at 4.2 volts roughly 18.2 amps.

Really loving this mech.
c940e3ff957fa214ddaeea8e94065faa.jpg
42108a1dce4ee659876746f876484c84.jpg


Sent from my SM-G975W using Tapatalk
be aware the m41 is not a particularly conductive RDA (got 3 myself). I can see up to .3V of additional drop when moving the same coil to a say a kennedy with square copper posts or a subzero x with silver plated copper posts.try it yourself with a .1ohm build
 

R.Savage

Bronze Contributor
Member For 4 Years
be aware the m41 is not a particularly conductive RDA (got 3 myself). I can see up to .3V of additional drop when moving the same coil to a say a kennedy with square copper posts or a subzero x with silver plated copper posts.try it yourself with a .1ohm build
Thanks for the heads up. I have been eyeing a Kennedy. My vape shop does not have any in atm. I did not know about that issue in the m41. Great information. Thank you.

Sent from my SM-G975W using Tapatalk
 

R.Savage

Bronze Contributor
Member For 4 Years
Don’t buy a Kennedy from anyone other than Kennedy. My opinion.
Thanks for the heads up. I trust my vape shop. It's the one vape shop I go to and no other. Been going there for two years.

Sent from my SM-G975W using Tapatalk
 

dhomes

Silver Contributor
Member For 4 Years
Thanks for the heads up. I trust my vape shop. It's the one vape shop I go to and no other. Been going there for two years.

Sent from my SM-G975W using Tapatalk

sure it's really mostly noticeable from 0.1ohm and below, it's more noticeable on the first one i got (first batch).

I do like the RDA and use it a lot, i like the flavor on it, just wouldnt call it a 'competition' on. Problem is the posts have too many moving parts internally

A cheap and conductive RDA is the Druga RDA, can be found for some $15, with a trinity glass cap is gives some REALLY good flavor and hits quite hard
 

dhomes

Silver Contributor
Member For 4 Years
Thanks for the heads up. I trust my vape shop. It's the one vape shop I go to and no other. Been going there for two years.

Sent from my SM-G975W using Tapatalk

You can also head up to https://subohminnovations.com/ and get the SOI X Shorty RDA + upgraded anvil post, they are running an inventory blowout with 70%. That's a hard hitting 25mm RDA that will run some $25 shipped (with the upgrades and all).

I have 3 of the minis and 2 and of the full sizes, the minis give better flavor
 

R.Savage

Bronze Contributor
Member For 4 Years
sure it's really mostly noticeable from 0.1ohm and below, it's more noticeable on the first one i got (first batch).

I do like the RDA and use it a lot, i like the flavor on it, just wouldnt call it a 'competition' on. Problem is the posts have too many moving parts internally

A cheap and conductive RDA is the Druga RDA, can be found for some $15, with a trinity glass cap is gives some REALLY good flavor and hits quite hard
I love the rda. But I do notice that the resistance creeps up every one in a while. Just tighten it down . Seems to be good.

Sent from my SM-G975W using Tapatalk
 

MrMeowgi

The Vapin' Drummer
VU Donator
Diamond Contributor
Member For 4 Years
So what are your thoughts mate?
Used it from the Time I got it set up til bed. It probably won't leave the house. But it's solid as hell. Fire switch has no play or shift and I don't see that it ever will. I'm really happy with it. Had a hard time deciding on what rda though. But the color shift in the finish is amazing. Blue but if you lay it down like in the photo the whole mod turns purple. Really great job Jwill did on these.
 

CashNVape

Gold Contributor
Member For 4 Years
yeah it has softened a bit over time and it’s not isolated, but it’s a pretty stiff spring even so.

I ended up putting a softer one in from my barebones mech until I source a replacement, but it goes with it really nicely so might just keep it in there
Check out vaping veterans supply.
They have solid silver springs for a few mods.

Sent from Amchitka
 

marter

VU Donator
Silver Contributor
Member For 4 Years
Thanks cash will do
Not sure what you're replacing with that spring, but you might want to talk to Jason (owner) @VVS619 before you order. I was a little surprised at the strength of Eric Simpson's springs. I wanted a spring to replace the magnets in my Purge B2B V2 so I ordered the heavy spring and it's way heavier than the magnets. Jason confirmed the heavy spring is stronger than the magnets in the Purge, and the medium is equal to them.

marter
 

CashNVape

Gold Contributor
Member For 4 Years
Not sure what you're replacing with that spring, but you might want to talk to Jason (owner) @VVS619 before you order. I was a little surprised at the strength of Eric Simpson's springs. I wanted a spring to replace the magnets in my Purge B2B V2 so I ordered the heavy spring and it's way heavier than the magnets. Jason confirmed the heavy spring is stronger than the magnets in the Purge, and the medium is equal to them.

marter
Yup. I ordered 2 pairs of each and glad I did because when I got my springs the heavy, was strong. Almost too strong.


Sent from Amchitka
 

gsmit1

Platinum Contributor
Member For 4 Years
Just got the last original goon at my vape store. Little polishing is in order. Bit looks great.


0a86351eec127a3bd0e4628d8bd2b54d.jpg
That;s the only Goon I don't have now. I have 2 1.5's and an SE copper 25, but no og.
 
Last edited:

R.Savage

Bronze Contributor
Member For 4 Years
Yep it is the brass version. I just coiled it and cottoned it up. Man. The flavor compared to the m41. Black and white. Love the flavour out of the goon.

Sent from my SM-G975W using Tapatalk
 

dhomes

Silver Contributor
Member For 4 Years
Yep it is the brass version. I just coiled it and cottoned it up. Man. The flavor compared to the m41. Black and white. Love the flavour out of the goon.

Sent from my SM-G975W using Tapatalk
man, i have about 6 goons and never really liked the flavor out of them, only one i found competent flavor wise was the LP

we are opposite here, the m41 gives me a lot more flavor than the goon.

then again may be my builds
 

gsmit1

Platinum Contributor
Member For 4 Years
man, i have about 6 goons and never really liked the flavor out of them, only one i found competent flavor wise was the LP

we are opposite here, the m41 gives me a lot more flavor than the goon.

then again may be my builds
Got an OG ya wanna get rid of?
 

dhomes

Silver Contributor
Member For 4 Years
Got an OG ya wanna get rid of?

Have a few yes, 22mm black v1, silver v1.5, black 25mm v2, LP (that i'll keep). But not particularly looking to sell them even though i dont use them. I normally bundle RDAs when selling my mods to get some extra value.

Now if you want a purge twistd i'm selling + 25mm goon we can talk :)
 

gsmit1

Platinum Contributor
Member For 4 Years
Have a few yes, 22mm black v1, silver v1.5, black 25mm v2, LP (that i'll keep). But not particularly looking to sell them even though i dont use them. I normally bundle RDAs when selling my mods to get some extra value.

Now if you want a purge twistd i'm selling + 25mm goon we can talk :)
Doesn't cost anything to ask :)
 

gsmit1

Platinum Contributor
Member For 4 Years
Or, yo have an rda i would be interested on? then we can trade a 24mm or 25 for another :)
Sorry I just saw this ,but I don't have anything to trade. That doesn't cost anything to ask either :)
 

triakis

Bronze Contributor
Member For 4 Years
Just pulled the trigger on a 2JNT Pilak Tycoon V2. Finally! 21700 power! Woohoo!
Appears to be the last one as Broody's site now shows not available! I nearly missed out on the V1 last year this time.
This should be epic. The ONLY reason why my slams and fallouts hit harder is because of the wonderful 30Ts. Outside of the stacks, this undoubtedly will be my hardest hitting and smoothest single cell mech. Can't wait!
 

jwill

The Great King of Nothing
VU Donator
Platinum Contributor
Member For 2 Years
VU Challenge Team
Reddit Exile
VU SWAT
There is a dude who makes springs from Highlands Texas, does anyone know the dudes name? He is a jeweler and does a lot of really nice springs. I had his card but cant find it and need to get ahold of him. Pretty sure someone here knows who this is, if not any spring maker you trust and recommend would be ideal.
 

gsmit1

Platinum Contributor
Member For 4 Years
There is a dude who makes springs from Highlands Texas, does anyone know the dudes name? He is a jeweler and does a lot of really nice springs. I had his card but cant find it and need to get ahold of him. Pretty sure someone here knows who this is, if not any spring maker you trust and recommend would be ideal.
See your messages please.
 

marter

VU Donator
Silver Contributor
Member For 4 Years
There is a dude who makes springs from Highlands Texas, does anyone know the dudes name? He is a jeweler and does a lot of really nice springs. I had his card but cant find it and need to get ahold of him. Pretty sure someone here knows who this is, if not any spring maker you trust and recommend would be ideal.
I believe you're thinking of Eric Simpson.
 

Don29palms

Silver Contributor
Member For 3 Years
ECF Refugee
Unlisted Vendor
Does anyone have a Hammer of God? Do you like it and is it worth the money?
 

mach1ne

Gold Contributor
Member For 4 Years
Does anyone have a Hammer of God? Do you like it and is it worth the money?
i have a few different v3 hogs and i love them. the only warning i can offer is that every newer edition i got, the quality control was worse and worse. i got the first v3 and it was perfect. the four horseman edition was good, but some of the screws in the switch/510 area got a bit loose after a while (misfires and weak feeling hits) and i had to take it apart and tighten everything down. the trinity edition was worse than the horseman and i had to take it apart and tighten everything up before i even put batteries in it for the first time. i was surprised to see them shipping like that at this price range, but once its all tight they are pretty much bulletproof in my experience. i would recommend one to anyone who is comfortable with mech mods and likes a hot vape :cheers:
 

VU Sponsors

Top