Become a Patron!

KGuardian

Silver Contributor
Member For 5 Years
Still doing this deal, y'all - order before next week if you want coils before Christmas :)

Hello Zephyr.... I don't know the science of coils in the least so I have a question. I've heard that SSFC coils are excellent for flavor, but I only vape at 30-40 watts max. Are those coils best only at high wattage and would be overkill for the wattage that I vape at? I vape out of a Bonza RDA and I have 3 iJoy EXO RDTA's. I've been shopping for another RDA and RDTA, but not sure what to get yet. Anyway, my mods are a Smoant Cylon, Lost Vape Therion, and Hometech Hohm Wrecker.
 

zephyr

Dirty Pirate Meg
VU Donator
Gold Contributor
Member For 4 Years
Unlisted Vendor
Hello Zephyr.... I don't know the science of coils in the least so I have a question. I've heard that SSFC coils are excellent for flavor, but I only vape at 30-40 watts max. Are those coils best only at high wattage and would be overkill for the wattage that I vape at? I vape out of a Bonza RDA and I have 3 iJoy EXO RDTA's. I've been shopping for another RDA and RDTA, but not sure what to get yet. Anyway, my mods are a Smoant Cylon, Lost Vape Therion, and Hometech Hohm Wrecker.


I will think on this, and reply tomorrow when I have time to concentrate :) My first gut response is "anything can be made to work at 30-40 watts"
 

KGuardian

Silver Contributor
Member For 5 Years
What gauge and type of wire do you vape in your rebuildables, and are they single or dual coils?

Mostly I've been using some coils made by Ohm Science. I use single coil and in particular the ones I like the best so far are called Alpha Braid and are labeled like this: 0.3*0.6+40*32 Ni80 0.26Ohms. They usually end up at 0.28 - 0.32 once installed
 

zephyr

Dirty Pirate Meg
VU Donator
Gold Contributor
Member For 4 Years
Unlisted Vendor
Mostly I've been using some coils made by Ohm Science. I use single coil and in particular the ones I like the best so far are called Alpha Braid and are labeled like this: 0.3*0.6+40*32 Ni80 0.26Ohms. They usually end up at 0.28 - 0.32 once installed


That's great - a SSFC single coil for 30-40 watts is definitely doable, and will give great flavor yep
 

zephyr

Dirty Pirate Meg
VU Donator
Gold Contributor
Member For 4 Years
Unlisted Vendor
Mostly I've been using some coils made by Ohm Science. I use single coil and in particular the ones I like the best so far are called Alpha Braid and are labeled like this: 0.3*0.6+40*32 Ni80 0.26Ohms. They usually end up at 0.28 - 0.32 once installed


I looked that up - that is one piece of .3x.6mm of nichrome ribbon/rectangle wire with 8 loops of 40g nichrome braided around it - the spools say 40*16 N80, the coils say 40*32 but I believe are mislabled - should be 8 loops (or 16 total strands) Celtic braided
 

WPMac

Silver Contributor
Member For 1 Year
Unlisted Vendor
For those of you not 'in the know' Meg is also a mixologist! I've been getting a salted caramel custard from her, dubbed "Big Comfy Couch" for a bit now. It is amazing. It works as an ADV as well as a nice break up of of other juices if/when you need a change. I have at least 1 atty with this mix in it at all times!!
 

zephyr

Dirty Pirate Meg
VU Donator
Gold Contributor
Member For 4 Years
Unlisted Vendor
For those of you not 'in the know' Meg is also a mixologist! I've been getting a salted caramel custard from her, dubbed "Big Comfy Couch" for a bit now. It is amazing. It works as an ADV as well as a nice break up of of other juices if/when you need a change. I have at least 1 atty with this mix in it at all times!!


Here's the recipe!

PSX_20181226_190528.jpg
 

Bluenatic

Bronze Contributor
Member For 4 Years
VU Patreon
I'll start by saying after placing an order, my coils were in my mailbox days before I would've expected. Lightening fast! Zephyr is super knowledgeable and a great person. Me being a newbie RDA user, I didn't have a clue where to start? But each question I asked was met with an informative response which helped me along the way to deciding which coils were right for me, my vaping style, and vaping setup. Couldn't have been easier. So obviously I recommend buying some of Zephyrs coils. I'll be placing another order next payday lol
 

LestatBP

Bronze Contributor
Member For 4 Years
Reddit Exile
Have you used coils made by me before? How durable are they? What do you think?

I have Alien Framed Staples in two tanks since October. I vape constantly because I work at home, and I'm a chain vaper. Both sets are still practically pristine looking and flavor is amazing.

I have two more of the same tanks on the way and plan to put the same coils in.
 

zephyr

Dirty Pirate Meg
VU Donator
Gold Contributor
Member For 4 Years
Unlisted Vendor
Transcribing audio and captioning isn't keeping my hands busy enough -

so I'm back at making functional artisan coils. Prices are decent - you all know how I operate by now probably, and if you don't - send me a message :>

For the fastest reply, shoot me an email:
[email protected] or 57zero-66one-1230 (Google number)
 
Last edited:

zephyr

Dirty Pirate Meg
VU Donator
Gold Contributor
Member For 4 Years
Unlisted Vendor
Love this stuff!! Ordered 12/26 arrived 12/28 ... and I am pleased to have gotten in on the "Very Good" batch :teehee::teehee:

View attachment 127852


I renamed this recipe back to its original name, Boss Blonde Caramel Custard - I want to clarify that I sell coils, not e-liquid.

On a case-by-case basis, though, I do like to occasionally share my DIY with other people on VU o_O;)
 

zephyr

Dirty Pirate Meg
VU Donator
Gold Contributor
Member For 4 Years
Unlisted Vendor
THESE are rather awesome Meg. I don't think I even knew you had an Instagram outfit like that.

Well, I went into it pretty hard last year - I (hopefully) won't get so stuck on macro photography again, but it was fun and I figured I should at least put it in my signature as a sort of "here's what I can do" thing
 

zephyr

Dirty Pirate Meg
VU Donator
Gold Contributor
Member For 4 Years
Unlisted Vendor
Updating OP to show I am also open to trades

Do you guys think having an inventory of ready-to-ship coils would get more people to order them?
 

DonBaldy

Platinum Contributor
Member For 4 Years
Updating OP to show I am also open to trades

Do you guys think having an inventory of ready-to-ship coils would get more people to order them?
I feel it depends on the buy. Some will want fast and other want to fresh made to order personal handmade touch.
 

zephyr

Dirty Pirate Meg
VU Donator
Gold Contributor
Member For 4 Years
Unlisted Vendor
I feel it depends on the buy. Some will want fast and other want to fresh made to order personal handmade touch.

I definitely like making them that way, for individuals

I'm considering having a few pairs already made, they won't be cheaper than made-to-order coils though - learned my lesson from that last year, when a guy kept ordering like 10-12 pairs and trying to get more for free - pretty sure he was re-selling them :<
 

Vape Fan

_evil twin_
Staff member
Senior Moderator
VU Donator
Platinum Contributor
Press Corps
Member For 5 Years
I think having a couple aliens/claptons, some SS, on hand would be good.
Also probably advertise MTL coils (other than just round wire), what with all the rebuildable pods now, along with rta's/rba's...
 

zephyr

Dirty Pirate Meg
VU Donator
Gold Contributor
Member For 4 Years
Unlisted Vendor
I think having a couple aliens/claptons, some SS, on hand would be good.
Also probably advertise MTL coils (other than just round wire), what with all the rebuildable pods now, along with rta's/rba's...


Right-o! I can make MTL coils too. There :D
 

gsmit1

Platinum Contributor
Member For 4 Years
Do you guys think having an inventory of ready-to-ship coils would get more people to order them?
Money is usually best made by getting many people to give you a little each. (relatively speaking)

The trouble with something like coil building is that what makes one builder stand out from another is more exotic builds, which are time consuming. Also, exotic builds make fine art, but are overkill for a good vape so few people are willing to pay for the time it takes to spin them.

That means that finding a way to make coils that will be affordable for the buyer, give them a great vape, and still bring you a good profit on your time is the trick. i am only thinking out loud here and might be wrong.

You definitely are well good enough to whip up some dual and triple core claptons and aliens in almost literally no time and material expense is trivial. People are paying you for your time and skill, not your wire.

I would suggest making an inventory and catalog of variations of those kinds of coils in different materials and putting up a web page with pix and cheap prices that still make you money if a lot of people buy them.

I would also put up a gallery there of your very impressive exotic work. This would give people unwavering confidence in your superior abilities and you could also take the less frequent special order, for a lot more money of course, from those who might want those exotic builds.

Cost is everything . People are money conscious, as you are well aware.

They aren't generally willing to pay much more than the cost of a decent subohm coil for a build. This has nothing to do with you. That's just the reality of the situation. I'm not certain of all the details of how to make all this work, but give them that and you will be rolling in business.

All just my opinion and open to revision and correction.
 
Last edited:

zephyr

Dirty Pirate Meg
VU Donator
Gold Contributor
Member For 4 Years
Unlisted Vendor
They aren't generally willing to pay much more than the cost of a decent subohm coil for a build.

Coils are like $5 a pop now arent they? That'd be about my price (per coil), for coils that last from months to...possibly infinity- compared to subohm tank coils going in the trash every week or two

I really would prefer to sell people what I consider the best functioning coils, and art coils are gonna be pricey (by my broke ass pirate standards) because yeah, those are time consuming and I really don't want to encourage people to think they're a better vape (depending on how artsy fartsy we're talking)

(psst you posted that 3 times) Thanks for your thoughtful input, sincerely <3
 

DonBaldy

Platinum Contributor
Member For 4 Years
@gsmit1 makes some good points. Sure show off your exotic builds, and while they are works of art, many really aren't that practice. Where you excel is your expertise with very fine wire which I believe really contributes to a superior vape. I'd try to highlight that aspect of your coil making.
 

zephyr

Dirty Pirate Meg
VU Donator
Gold Contributor
Member For 4 Years
Unlisted Vendor
It's time to build.

2 pairs of framed staple clapton and aliens for $10
 

bx10r

Platinum Contributor
Member For 4 Years
Got my 4 sets of framed staples today...yowzas.....thank you @zephyr
66ded08adf711eaa0e0e4192784a7459.jpg
863aa8cb69fe302d7d47d30249785b80.jpg
2926a4211540677cbba7cbc18409c438.jpg
a6be09d06331731a03cda33fbdd32490.jpg


Sent from a very cloudy room
 

zephyr

Dirty Pirate Meg
VU Donator
Gold Contributor
Member For 4 Years
Unlisted Vendor
Got my 4 sets of framed staples today...yowzas.....thank you @zephyr
66ded08adf711eaa0e0e4192784a7459.jpg
863aa8cb69fe302d7d47d30249785b80.jpg
2926a4211540677cbba7cbc18409c438.jpg
a6be09d06331731a03cda33fbdd32490.jpg


Sent from a very cloudy room


Thank you man, I was down to 1 pair of very old 18650s and 1 21700 - your batteries made my vaping life much less stressful lol
 

zephyr

Dirty Pirate Meg
VU Donator
Gold Contributor
Member For 4 Years
Unlisted Vendor
For the first time, I have a small stock of already made coils. I'm having a sale - 2 pairs of kanthal/nichrome mixed framed staples for $15 shipped, here are the specs:

0.29mm Nichrome Frames
7x0.3mm FeCrAl Staple
40awg FeCrAl Clapton

3mmID, 4.5 wraps, 0.11 ohms/pair

Your choice of tightly wrapped or slightly spaced (for easier install), I'll keep this sale up until they're gone

2019-12-04.jpg


Merry Christmas!
 

bx10r

Platinum Contributor
Member For 4 Years
Go get em...her coils are killing it in my goon...
950b603e34d06e6e7fa8ba55641d58e0.jpg


Sent from a very cloudy room
 

zephyr

Dirty Pirate Meg
VU Donator
Gold Contributor
Member For 4 Years
Unlisted Vendor
Adding to this All 316L SS framed staples - 0.13 ohms/pair, same price two pairs for $15

30g SS frames
4x0.3 SS staple
40awg SS clapton

3.5mm id 5.5 wraps
 
Last edited:

Bigrick

Gold Contributor
Member For 4 Years
ECF Refugee
Have you used coils made by me before? How durable are they? What do you think?
I have a pair of coils which were a gift when I bought a NC V1 from her. Imagine free coils for buying a $6 delivered mod. Seriously this is a true story. She included a heat sink as well. So $6 - 1 mod, 1 pair coils ( aliens I think ), and a heat sink..
The coils are in a DR which is in regular rotation. The coils in it are over a year old. Dry burn - rewick, like new. Repeat. The flavor is excellent. Made like my DR again.
You young lady are truely one of the good ones. Buy with confidence, trust, and the expectation of receiving the highest quality coils available.
Everyone have a peacefull week and God bless.
 

zephyr

Dirty Pirate Meg
VU Donator
Gold Contributor
Member For 4 Years
Unlisted Vendor
I have a pair of coils which were a gift when I bought a NC V1 from her. Imagine free coils for buying a $6 delivered mod. Seriously this is a true story. She included a heat sink as well. So $6 - 1 mod, 1 pair coils ( aliens I think ), and a heat sink..
The coils are in a DR which is in regular rotation. The coils in it are over a year old. Dry burn - rewick, like new. Repeat. The flavor is excellent. Made like my DR again.
You young lady are truely one of the good ones. Buy with confidence, trust, and the expectation of receiving the highest quality coils available.
Everyone have a peacefull week and God bless.

:oops: Thank you... wow :D Thank you so much for posting that kind review and compliment :cheers: You have a peaceful week, too


Here's what I have stocked right now, I want to keep going because this is way more fun than captioning, but then, captioning is definite money :sneaka:

IMG_20191204_145644~2.jpg IMG_20191204_145506~2.jpg
 

Bigrick

Gold Contributor
Member For 4 Years
ECF Refugee
:oops: Thank you... wow :D Thank you so much for posting that kind review and compliment :cheers: You have a peaceful week, too


Here's what I have stocked right now, I want to keep going because this is way more fun than captioning, but then, captioning is definite money :sneaka:

View attachment 150982 View attachment 150983
I use that NC V1 and those coils most every day, seriously in regular rotation. Thats the best $6 I EVER spent!
I sewed a leather sleeve for it. Very simple but looks classy. I think it looks great and I love the vape..
 

Attachments

  • 1575493819818-1384228501.jpg
    1575493819818-1384228501.jpg
    102.4 KB · Views: 16

GeNomeZ

Member For 1 Year
I would also like to say that @zephyr’s coils are awesome. Plus, she was super helpful guiding me through just the right coils for several mods that I wanted to get up and running. I’m new to RDA’s and she really helped me out.

She was very patient recommending particular batteries and she even sweetened the pot when she sent my order a little later than she had expected.

I will definitely recommend her and will be back for more. Thank you!
 

Vape Fan

_evil twin_
Staff member
Senior Moderator
VU Donator
Platinum Contributor
Press Corps
Member For 5 Years
I would also like to say that @zephyr’s coils are awesome. Plus, she was super helpful guiding me through just the right coils for several mods that I wanted to get up and running. I’m new to RDA’s and she really helped me out.

She was very patient recommending particular batteries and she even sweetened the pot when she sent my order a little later than she had expected.

I will definitely recommend her and will be back for more. Thank you!
I remember you looking. wtg
 

zephyr

Dirty Pirate Meg
VU Donator
Gold Contributor
Member For 4 Years
Unlisted Vendor
I've still got some all-SS and kanthal/nichrome mix coils ready to ship, 2 pairs for $15 :>
 

zephyr

Dirty Pirate Meg
VU Donator
Gold Contributor
Member For 4 Years
Unlisted Vendor
All me SS coils are gone, but I can make up some fresh for anyone who needs 'em!

Still have some kanthal/nichrome mix 0.11 ohm/pair framed staples just sitting around waiting for a forever home, 2 pairs for $15 shipped

These can also be used as 0.22 ohm single coils, just mention it

2.jpg

2019-12-16.jpg
 

VU Sponsors

Top