Become a Patron!

I want to see everyone's wood....... (Stabwood, wood, mixed ) Regulated, Mechanical, Wood look alike

Jinx'd

Platinum Contributor
Member For 2 Years
I sold last year's and bought my GPZ metal detector...... The ones this year made no plans yet.....I like to get (31) grams together and sell them as an ounce.

But I put them in my metal detecting site as testers for metal detectors and sell them for $50 bucks for 1/2 gram....

I put (10) up for sale and they sold the same day......

1/2 gram are perfect testers to bury when you arrive at the area and adjust your settings to the ground mineralization.

Sent from my Pixel 2 XL using Tapatalk

are you on the Gold Diggers Underground web site ?
 

Jinx'd

Platinum Contributor
Member For 2 Years
For a metal detector to detect 1/2 gram of non conductive metal at (2 feet plus) is amazing..... Most are found at around 8" to 12" inches.....

Sent from my Pixel 2 XL using Tapatalk

its is. what i meant was, i'd figure there would be more in the same area.
 

MannyScoot

Diamond Contributor
Member For 4 Years
thatss odd, we are getting stuff. they closed down overnight to restock whatever they get in. and while we were that they were stocking. we are not any closer.
I went to Albertsons and they had a truck sitting in the back and no employees to unload them.... I asked why and they said most of their unloaders are covered under the American Disabilities Act and get paid and not required to work during a national emergency.

They hire most employees that are ADA.....they get deductions, and tax breaks at the end they end up with free labor....

Sent from my Pixel 2 XL using Tapatalk
 

Rhianne

Diamond Contributor
Member For 2 Years
ECF Refugee
I went to Albertsons and they had a truck sitting in the back and no employees to unload them.... I asked why and they said most of their unloaders are covered under the American Disabilities Act and get paid and not required to work during a national emergency.

They hire most employees that are ADA.....they get deductions, and tax breaks at the end they end up with free labor....

Sent from my Pixel 2 XL using Tapatalk

So people with disabilities are hired to shlep stuff?? How and why, I wonder. Very strange.
 

MannyScoot

Diamond Contributor
Member For 4 Years
So people with disabilities are hired to shlep stuff?? How and why, I wonder. Very strange.
Mentally they are not there, but physically they are.....

There is also a company called Muscular Moving Men, they hire physically able ADA workers..... most are mongoloids, but have muscles.

Sent from my Pixel 2 XL using Tapatalk
 

Rhianne

Diamond Contributor
Member For 2 Years
ECF Refugee
Mentally they are not there, but physically they are.....

There is also a company called Muscular Moving Men, they hire physically able ADA workers.....

Sent from my Pixel 2 XL using Tapatalk

Omg, I read about that a long time ago. Apparently they love to work, so it’s good that they can!
 

Rhianne

Diamond Contributor
Member For 2 Years
ECF Refugee
Subscribe to plenty of fish and send me pictures

Sent from my Pixel 2 XL using Tapatalk

You want pics of fish?
giphy.gif

Julia Child likes to beat fish!! :teehee:
 

DrVapenstein

Bronze Contributor
Member For 5 Years
I've never loved drippers the way I love rtas. I use a dripper to dial in a recipe, but that's about it. I spent the better part of the day with my rda the other day, and it turned my thoughts toward squonkers. I've never owned one. When I saw how cheap the Ultroner/Asmodus Luna was, coupled with me having rewards points at the vendor, that made the mod less than $20 shipped. I only thought about it for a day. This is on the way, I'll post a pic of the real thing when it arrives. I have a problem.
yg259VM.png
 

Rhianne

Diamond Contributor
Member For 2 Years
ECF Refugee
I've never loved drippers the way I love rtas. I use a dripper to dial in a recipe, but that's about it. I spent the better part of the day with my rda the other day, and it turned my thoughts toward squonkers. I've never owned one. When I saw how cheap the Ultroner/Asmodus Luna was, coupled with me having rewards points at the vendor, that made the mod less than $20 shipped. I only thought about it for a day. This is on the way, I'll post a pic of the real thing when it arrives. I have a problem.
yg259VM.png

Did you get it from Asmodus? I didn’t like squonking the first and only time I tried it, but it was the flavor change that weirded me out. But it was the first time I used an RDA. Then a mixer/member told me that the juice I was using from a member ( now gone) was prolly at fault. (Very high % of flavors.)

I tried dripping, but refilling it every four or five pulls is a bit much. So with RTAs, you can fill the tank like a sub ohm tank? :huh:

Eventually all of this will make sense to me, I suppose. If Deeming and a plague weren’t on our doorstep, I’m pretty sure I’d just stick with PnP coils!
 

DrVapenstein

Bronze Contributor
Member For 5 Years
@Rhianne yeah rtas look similar to sub ohm tanks. I've always felt that the smaller chamber of rtas were conducive to good flavor, but mostly there is something about the more restrictive draw that is appealing to me.

I bought the new squonk from Vapor Range. I picked up all my Kodamas from them too, and I have nothing but nice things to say about them.
 

Jinx'd

Platinum Contributor
Member For 2 Years
I've never loved drippers the way I love rtas. I use a dripper to dial in a recipe, but that's about it. I spent the better part of the day with my rda the other day, and it turned my thoughts toward squonkers. I've never owned one. When I saw how cheap the Ultroner/Asmodus Luna was, coupled with me having rewards points at the vendor, that made the mod less than $20 shipped. I only thought about it for a day. This is on the way, I'll post a pic of the real thing when it arrives. I have a problem.
yg259VM.png

those are pretty nice. but one thing, check the bottles, mine leaking to the point of not usable. just pinch the tube closed and give a light squeeze, it should hold the pressure.
 

MannyScoot

Diamond Contributor
Member For 4 Years
those are pretty nice. but one thing, check the bottles, mine leaking to the point of not usable. just pinch the tube closed and give a light squeeze, it should hold the pressure.
They all leak sooner or later...Some worst than the other....

Sent from my Pixel 4 XL using Tapatalk
 

Rhianne

Diamond Contributor
Member For 2 Years
ECF Refugee
RTA's and sub-ohms are the same thing. except RTA's are rebuildable and sub-ohms change out the coil.

Only difference? Sigh, I wish I hadn’t bought a bunch of RDAs. But if I’m hard up, I can squonk. Thanks.
 

Rhianne

Diamond Contributor
Member For 2 Years
ECF Refugee
Take care sweets.....and don't go around sick people .....Gave my Java a quick polish before self isolation out in the mountains.....
4d9cf3ecde428db33c6b4ebb5947808b.jpg


Sent from my Pixel 4 XL using Tapatalk

At least you’re not likely to meet any corona zombies in the mountains! That mod is so gorgeous, as always.

Cuidate, hermano. :hug::hug:
 

Jinx'd

Platinum Contributor
Member For 2 Years
Only difference? Sigh, I wish I hadn’t bought a bunch of RDAs. But if I’m hard up, I can squonk. Thanks.

yeah, but its not quit that simple, RTA's can be a pita to wick, kind of a fine'ish line between leaking and dry hits.
RDA's, on the other hand, basicly, don't leak and don't dry hit. though, when they do, its very much direct user error. and are far easier to wick.
 

gsmit1

Platinum Contributor
Member For 4 Years
That is a beautiful mod ! Specially with strong Kamagong wood.....

The Philippinos make good mechanical mods....
Thanks!
It's an old timer for sure. Performs pretty well. Not like my DS, but well worth using for a parallel mech. I bought it as kind of a project, but like usual never did get around to working on it. I figured how can you go wrong for 20 bucks? I am no wood expert, but I looked it up when I got it and it turns out this is some kinda zooty exotic wood.
 

fidola13

Silver Contributor
Member For 4 Years
yeah, but its not quit that simple, RTA's can be a pita to wick, kind of a fine'ish line between leaking and dry hits.
RDA's, on the other hand, basicly, don't leak and don't dry hit. though, when they do, its very much direct user error. and are far easier to wick.

just watch a few build videos and you’ll have no problems with wicking.
 

fidola13

Silver Contributor
Member For 4 Years
those are pretty nice. but one thing, check the bottles, mine leaking to the point of not usable. just pinch the tube closed and give a light squeeze, it should hold the pressure.

only leaking is when I’m not paying attention when taking the bottle out. That’s what I have 3 single Topsides and a dual Topside as well as 3 Revenants. In addition to all the mechs. The mechs bore me. Always changing out the battery waste of time. I go ALL day and night with a Topside no problems plus it fills from the top.

F2FEB507-A6E1-4B81-9DE5-ABD3218A1443.jpeg 4FDBF34E-F83E-4378-B8AA-E5F403FA12B5.jpeg 325FC2EE-4F67-4EDE-9DFB-34419CA39BB1.jpeg
 

VU Sponsors

Top