LOLOL I thought those days were gone.....But then... I get pulled right back in.... Springfield XD45.......NOoooooooooo!!!
Become a Patron!
Reuleaux RX 200.
- Thread starter Dan DePippo
- Start date
Not killed, merged! New and improved! See how it grew???
She's a keeper!
There's been some complaints, but someone suggested that charging the batteries via the micro USB might be causing some of the issues. I'll be using my Nitecore D4 Digicharger from now on, just in case. Version 1.07 is working good enough for me.
Why would charging through the usb cause issues?? Source please.
Always a good thing to have a plan B.
Here is Plan B.
Here is Plan B.
I don't know why. It was just some guy suggesting it; not an authoritative source. I think he just thought he recognized an emerging pattern among people having issues. That's all.
LOL. I can't afford that kind of plan B. I'm gonna have to make plan A work.Always a good thing to have a plan B.
Here is Plan B.
I've charged a couple different box mods via USB port with no issues, like the Zero mod clone with YiHi SX300 and currently with the RX200. Someone in this forum pointed out that the RX200 only pulls 1 amp when charging, meaning the batteries get about 330 milliamperes each. (From what I can remember that was stated earlier in the thread)
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
CrazyChef
Custom Hand Crafted Coils - PureCoils.com
VU Vendor
VU Donator
Platinum Contributor
Member For 4 Years
ECF Refugee
So, for a definitive answer, are Samsung 25Rs okay to use with the Reuleaux RX200? The specs recommend 25 amp batteries, and the 25Rs are rated at 20 amp continuous.
I probably won't need anything over 150 watts, but who knows? I want to be able to run some bulky coils in it. I have a parallel mech, but it really falls short on the ramp up time on, say, a framed staple coil. Or even a dual alien build using lower gauges for the core wires.
I probably won't need anything over 150 watts, but who knows? I want to be able to run some bulky coils in it. I have a parallel mech, but it really falls short on the ramp up time on, say, a framed staple coil. Or even a dual alien build using lower gauges for the core wires.
Last edited:
That was me, I use a 750 ma charger so I charge at even less. Gives me a safety margin, but takes a while to charge. I don't always USB charge, If the batts are lower than 70-75%, they come out.
Last edited:
According to Ohms Law, power (wattage) = voltage X current (amps). So with only 20 amps continuous discharge (not peak), multiply the maximum voltage of the RX200 (which is 9 volts), you can probably safely use the Samsung 25Rs up to 180 watts. Personally I wouldn't go above 150 watts (for "head room") if I was running those batteries myself. This is also assuming you are running a coil (or coils) that is .45 ohms resistance or below.
(source: http://www.ohmslawcalculator.com/ohms-law-calculator)
Sent from my iPhone using Tapatalk
Thanks OneBadWolf, I didn't want to dig through the thread (especially after the merge!).
I would do the same thing and pull the batteries out if it is really low, since charging it in the mod would take forever and pop them into a 4 bay charger.
I tend to charge via USB every night, so it is usually a non-issue.
Sent from my iPhone using Tapatalk
NOLA_Willie
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
We all knew they been mixing the colors
There's no official OREO color way.... Duhhhh
You're a real jerk, know that?
VAPE ON
We all knew they been mixing the colors
There's no official OREO color way.... Duhhhh
VAPE ON
We are going as fast as we can, pick a number oh wise oneHail Tyger, at least you jumped in with both feet.
(Belated nuptial congrats BTW, all my best to you both)
I was about to assure Huck that nothing I posted was directed at her... the higher ups who should be overseeing this sort of mundane forum management.
Or rather directing their appointed mods on how to handle operations.
These puppies have been running for decades now (I should know, I was there)
... it's not rocket surgery.
What The F@#k...39.95
http://vapenw.com/new-arrivals/reuleaux-rx200-by-wismec-jaybo-designs
http://vapenw.com/new-arrivals/reuleaux-rx200-by-wismec-jaybo-designs
I just ordered another one on eBay for 46.55 shipped. US seller can't beat that
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
So they lowered the price $25 after the pre-sale. What a bunch of dickheads! So glad I pre-ordered from them. Ugh...
Sent from my iPhone using Tapatalk
The batts are more than the mod. lololol
That's not how you calculate battery current on a vw mod. Watt setting divided by BATTERY voltage gets you battery current. Build resistance and output voltage have nothing to do with battery current on a vw mod.
So..... Evolve. Still holding out for $80 for the chip alone?
At these prices, its only a matter of time before some hardcore bad ass uber geeks from hell, reverse engineer the firmware, and write a command interperter to intergrate the RX with Lightscribe.
I'm talking about men who will never experience female companionship, or sunlight, or emerge from their parents basements for any extended periods of time. The mad monks of microchip mayhem. They dream in binary, and could solder surface mount components before they could ride bicycles. OK, they will never ride bicycles, but Evolve, take heed...... Your pricing model realy needs to...... um...... Evolve.
At these prices, its only a matter of time before some hardcore bad ass uber geeks from hell, reverse engineer the firmware, and write a command interperter to intergrate the RX with Lightscribe.
I'm talking about men who will never experience female companionship, or sunlight, or emerge from their parents basements for any extended periods of time. The mad monks of microchip mayhem. They dream in binary, and could solder surface mount components before they could ride bicycles. OK, they will never ride bicycles, but Evolve, take heed...... Your pricing model realy needs to...... um...... Evolve.
Last edited:
Thanks for this... just cancelled my order with slowtech and ordered from them!
5 bucks for orders under 75... over is free
I think about five bucks, but my mod got here in 3 days from the day I placed the order...
Sent from my QTAQZ3 using Tapatalk
Exactly why I switched my order from FT to there... Now I just have to make sure I don't scratch it before the sleeves get here from FT in a month lolI think about five bucks, but my mod got here in 3 days from the day I placed the order...
Sent from my QTAQZ3 using Tapatalk
Edit Unfortunately some placed only let you pick one nowadays. Cheap, it's neither good or fast service
Last edited:
Damn... how much is a bottle of juice?
As I sit here and blow smoke like a Navaho Chief with V1...lol...
They are 11.99 for a 15 mil. So you figure it's like getting free shipping and a 6 dollar 15 mil...win, win
They are 11.99 for a 15 mil. So you figure it's like getting free shipping and a 6 dollar 15 mil...win, win
Eh, not really... the juice I buy is 50 bucks for 240ml lol... thanks for the heads up anyways!
That's a good price
Where do you buy your juice ? Thx!
Sent from my XT1080 using Tapatalk
From a buddy of mine! lol...
However, the guys in my sig below often run buy one get one and will bring you to almost the same price I believe... I buy from them every BOGO sale because I love their stuff, but rely on my buddy between sales lol
Huh?
www.that1vape.com and http://verdevalleyvapes.com/
Both companies have awesome juice and fantastic customer service...
Both companies have awesome juice and fantastic customer service...
Sure, the first vapin' Human ever who is immune to shiny-itis.!!! You're the only one! Hee he he hee!We don't understand why you persist in this attempt to influence us.
We are immune to your influences.
(help... HypnEvic made me type this
Can any of you guys post a pic of the new UI after the latest update?
My RX200 is working fine right now, and if the update is just for a Font Change...I'd like to see it before I update.
(I'm currently on 1.07)
My RX200 is working fine right now, and if the update is just for a Font Change...I'd like to see it before I update.
(I'm currently on 1.07)
Can any of you guys post a pic of the new UI after the latest update?
My RX200 is working fine right now, and if the update is just for a Font Change...I'd like to see it before I update.
(I'm currently on 1.07)
Its more than a font change, I rolled bact to 1.07, If I were you, I would wait to 1.09 before you upgrade.