Become a Patron!
Hello.
Sorry, if this is wrong section for this type of post.
Anyway, I would like to introduce you my project which i have beed working for 2 years.
This is 1.0 version, after 2 months of closed beta tests. I'm still working on it and I'm going to add a mass of useful features.
r2m0kOE.png


Vape Tool Pro Version


Lite Version



Vape Tool Pro is huge arsenal for every vaper. User friendly design. For beginners and advanced vapers.
Vape Tools Features :

Coil Maker: help you calculate perfect coils, number for wraps or resistance based on wraps !
it support multi-coil setups, types like Clapton Coil, Parallel Coil, Twisted Coil, and diffrent wire materials
Sweet Spot Finder: Shows you the wattage sweet spot for your coil setup.
Liquid Blender: will help you make e-liquids and calculate thier final cost. You can save recipes and share with your friends.
FAQ Articles: read about E-Ciggaretes, MODs, BOXs, Coil Builds, Mechanical Mods, E-Liquids,Atomizers, Accessories etc.
Battery Life: allows you to calculate estimated runtime on your mechanical mods and estimated puffs
Ohm Law calculator: based on ohm law, you will be able to calculate Voltage [V], Resistance [Ω], Current [A], Power [W]
AWG converter: provide easy conversion from AWG to mm
 
Last edited:

WiSK

Member For 4 Years
Member For 3 Years
Member For 2 Years
Just downloaded and tried it quickly and it looks useful. Good work :D
 

Das Bund

Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Sometimes I have problems while using Steam Engine. Downloading this App now, hopefully it's more accurate it definitely looks good.
 

MrMeowgi

The Vapin' Drummer
VU Donator
Diamond Contributor
Member For 4 Years
It's definitely a good app for building. I use it at least once a week. Seems pretty spot on with the coil builder. Not sure about the juice blender though
 

Gudhak

Member For 4 Years
Member For 3 Years
Member For 2 Years
5 stars though more preadded recipes and maybe a notes section for recipes would be awesome

Sent from my Z958 using Tapatalk
 

DED420

Silver Contributor
Member For 4 Years
Been using this for a while now, pretty handy little app, ohms law calculator / coil maker are all I use so far, but it works flawlessly so far, keep up the good work :)
 

emsvapor

Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Been using it for a while and the coil calculator is spot on

Sent from my C6725 using Tapatalk
 

Qlippoth

Bronze Contributor
Member For 3 Years
Member For 2 Years
Member For 1 Year
I love this app. Very effective for coil speccing and diy juice. It even keeps track of your flavor concentrate inventory

Sent from my H220 using Tapatalk
 

LivingSacrifice5

Member For 3 Years
Member For 2 Years
Member For 1 Year
This program is KILLER! Very nice program! It makes figuring out coil resistances easy. I like it way better that the steam engine. It's a lot less complicated! Keep up the good work!
 

AndriaD

Yes, I DO wear a mask! I'm vaccinated, too!
VU Donator
Diamond Contributor
ECF Refugee
Member For 5 Years
I tried this the other day, when I was first trying out SS316L, but it would never let me go to the "coil maker" section, so it was useless to me; I had to go to my PC and use steam-engine.

Andria
 

CoolBeans32

Member For 3 Years
Member For 2 Years
Member For 1 Year
Very nice app, i just downloaded and enter the variables for some alien and framed staple coils i already made and numbers are just about on point. ill be using this app instead of steam engine from now on.
 

Majistir

Member For 4 Years
Member For 3 Years
With so many vape calculator apps out there, I wouldn't have tried it if no one had said anything.
I have only added one of my recipes to the blender so far but I like the calculations on cost per flavor, vg, pg, and nic base. I've always done that on paper just to know how much I actually spend on diy. It looks like you took it one step further and allow one to have a digital library of flavoring supply! No more rummaging through flavors only to find out I only have 1ml left!

Looks to be allot of work to input all my flavors and prices and what not but it could be worth it.

I've only just started messing with the lite but found it won't automatically adjust vg/pg ratio. It will go into the negative for instance on PG when adding pg flavors into 100%pg nic base. Would make it more simple possibly by adjusting itself.

Good job though. I think i may be switching over.
 

deviantplatypus

Member For 4 Years
I love this tool. I think the UI is better designed than many of the other tools I've seen out there.

I wish it supported cloud storage of data. It'd be nice to slip between my phone and tablet and see all my saved coil setups. I believe it supports local storage though.

Sent from my Nexus 5X using Tapatalk
 

pizzadave80

Gold Contributor
Member For 4 Years
I have been using vapors toolbox on android.... it was spot on for my build....first ever build.

Sent from my SM-G935V using Tapatalk
 

Stevevapes4183

Member For 3 Years
Member For 2 Years
Member For 1 Year
I got the Pro version and I love it. Use it daily.. Thanks for the awesome app!

Sent from my SM-J700P using Tapatalk
 

Straick

Member For 3 Years
Thank you for putting in the time to make the app. I've used it a lot(helps that the interface is so easy to use) while rebuilding my drippers, and really like it (went to the pro version after less than a week).
The battery library has saved me more than a few headaches I'm sure. It let me double check some batteries, only to find they weren't safe to use in my mod, and a lot faster than trying to find specs online (which end up inflated half the time).
Now that I'm getting into diy juice, I'm looking forward to trying that part out.

The only thing I wish it had was some information to help id if a battery could be counterfit. Thats the one thing that scares me with these batteries, counterfit ones that are actually rejects that have been rewrapped to make an easy buck, all while putting people at risk.

Thank you again for putting the time in.

Sent from my SM-G930P using Tapatalk
 

MrMeowgi

The Vapin' Drummer
VU Donator
Diamond Contributor
Member For 4 Years
Been using on Android from the beginning. Pro is even better. Great job

Sent from my Nexus 6P using Tapatalk
 

juicy76

Silver Contributor
Member For 4 Years
Member For 3 Years
Hello.
Sorry, if this is wrong section for this type of post.
Anyway, I would like to introduce you my project which i have beed working for 2 years.
This is 1.0 version, after 2 months of closed beta tests. I'm still working on it and I'm going to add a mass of useful features.
r2m0kOE.png


Vape Tool Pro Version


Lite Version



Vape Tool Pro is huge arsenal for every vaper. User friendly design. For beginners and advanced vapers.
Vape Tools Features :

Coil Maker: help you calculate perfect coils, number for wraps or resistance based on wraps !
it support multi-coil setups, types like Clapton Coil, Parallel Coil, Twisted Coil, and diffrent wire materials
Sweet Spot Finder: Shows you the wattage sweet spot for your coil setup.
Liquid Blender: will help you make e-liquids and calculate thier final cost. You can save recipes and share with your friends.
FAQ Articles: read about E-Ciggaretes, MODs, BOXs, Coil Builds, Mechanical Mods, E-Liquids,Atomizers, Accessories etc.
Battery Life: allows you to calculate estimated runtime on your mechanical mods and estimated puffs
Ohm Law calculator: based on ohm law, you will be able to calculate Voltage [V], Resistance [Ω], Current [A], Power [W]
AWG converter: provide easy conversion from AWG to mm
Really wish there was tutorials in English on this for advanced builds!! Can you work on this as well! Already payed for pro version but unclear the in-depth details on builds
 

Zohmbiebuilds

Silver Contributor
Member For 3 Years
I find that for kanthal it's great but with SS, and nichrome it gives you the resistance but not the final after pulsing.

Sent from my Z981 using Tapatalk
 

uansari1

Bronze Contributor
Member For 1 Year
This app is spot on...it calculates my coil at .483 ohm, and the mod reads it as .48 ohm after pulsing.
 

GillyDaKidd78

Member For 3 Years
Hello.
Sorry, if this is wrong section for this type of post.
Anyway, I would like to introduce you my project which i have beed working for 2 years.
This is 1.0 version, after 2 months of closed beta tests. I'm still working on it and I'm going to add a mass of useful features.
r2m0kOE.png


Vape Tool Pro Version


Lite Version



Vape Tool Pro is huge arsenal for every vaper. User friendly design. For beginners and advanced vapers.
Vape Tools Features :

Coil Maker: help you calculate perfect coils, number for wraps or resistance based on wraps !
it support multi-coil setups, types like Clapton Coil, Parallel Coil, Twisted Coil, and diffrent wire materials
Sweet Spot Finder: Shows you the wattage sweet spot for your coil setup.
Liquid Blender: will help you make e-liquids and calculate thier final cost. You can save recipes and share with your friends.
FAQ Articles: read about E-Ciggaretes, MODs, BOXs, Coil Builds, Mechanical Mods, E-Liquids,Atomizers, Accessories etc.
Battery Life: allows you to calculate estimated runtime on your mechanical mods and estimated puffs
Ohm Law calculator: based on ohm law, you will be able to calculate Voltage [V], Resistance [Ω], Current [A], Power [W]
AWG converter: provide easy conversion from AWG to mm
I just downloaded, so far I like what I see! Great job!
 

Bigrick

Gold Contributor
Member For 4 Years
ECF Refugee

VU Sponsors

Top