Whats Your Mechanical Collection Look Like?

raymo2u · May 15, 2016

StereoFreeze said:
.A few mechs added to the collection this week. A second MCM series box and a Tarsius Customs Prime. I'm glad the Tarsius was nice and cheap, it would have been a disappointing purchase at full retail.

You know that setup on the left would look better in my collection....

StereoFreeze · May 15, 2016

raymo2u said:
You know that setup on the left would look better in my collection....

Haha, I haven't even put batteries or coils in that setup yet! That said, for the right trade everything is negotiable

raymo2u · May 15, 2016

StereoFreeze said:
Haha, I haven't even put batteries or coils in that setup yet! That said, for the right trade everything is negotiable

Well watcha lookin fer??

StereoFreeze · May 15, 2016

raymo2u said:
Well watcha lookin fer??

Don't know yet, but you'll be the first to know when I figure it out.

PaulS · May 15, 2016

I thinkm it would look even better in my collection Ray. I am the series guy.

anavidfan · May 15, 2016

Just got this little Nectar Micro clone, real nice and its in "BLACK" !!!!

martnargh · May 15, 2016

Stacked tubes have been around for a long time, they were frowned upon by some at one time... theyre coming back now... av able mods have stacked attachments that you buy and they use the same switch from the original tube... so you can choose to use your able stacked or nonstacked, i think this stacked tube works on most av mods, all sleeved mods anyway... thatll probably be my next big buy. A sweet av setup.

Sent from my SM-N920T using Tapatalk

Innova · May 16, 2016

Nemesis collection.

pulsevape · May 16, 2016

Innova said:
View attachment 51169 Nemesis collection.

we have a doc dave fanboy here.....

Innova · May 16, 2016

anavidfan · May 16, 2016

Innova said:
yep

Hi Innova, I just got a mini Bliss, second hand, I broke the glass and it needs new orings. Do you have a source for oring sizes and where to get the glass? I tried Bedazzle and they no longer have the glass.

GORGEOUS collection !!!!

Innova · May 16, 2016

anavidfan said:
Hi Innova, I just got a mini Bliss, second hand, I broke the glass and it needs new orings. Do you have a source for oring sizes and where to get the glass? I tried Bedazzle and they no longer have the glass.

GORGEOUS collection !!!!

Try IBtanked. I got some glass tanks for my DID's and they came with O rings.

pulsevape · May 16, 2016

Innova said:
yep

his center post design drove me crazy...

Innova · May 16, 2016

pulsevape said:
his center post design drove me crazy...

I know Pulse, copy. Took me a few builds.

Freejep · May 16, 2016

Not sure if a pair of full mechs and an unregulated mech count as a collection...but with my Lucifer in transit I'm a step closer anyways....

I run the dos at 0.21 ohms...the incubus at 0.05 ohms and the unregulated advken(that I was duped into buying cos the advert said FULL MECH..which it ain't) at 0.5 ohms to keep the amps low...now just waiting to av a play with a series mech when the Lucifer arrives...Cheers PaulS for posting a pic of your lucifer...had to order one after seeing it...

anavidfan · May 17, 2016

"Blacktie Affair"

JuicyLucy · May 17, 2016

anavidfan said:
"Blacktie Affair"

Sign me up

Stepinrazor · May 17, 2016

StereoFreeze said:
Added a new one to the collection today.

I ordered a MCM Underground today, how do you find it

Stepinrazor · May 17, 2016

I am all about the full mech mod

Stepinrazor · May 17, 2016

StereoFreeze · May 17, 2016

Stepinrazor said:
I ordered a MCM Underground today, how do you find it

Love it, definitely one of my favorites. My only complaint is I wish they had designed it with adjustments for battery rattle. A really thin nylon washer between the button and battery has solved that, but would have been better if the delrin piece under the button was adjustable instead.

StereoFreeze · May 17, 2016

@Stepinrazor Damn that's a lot of Kennedy's and Limitless mods!

Stepinrazor · May 17, 2016

StereoFreeze said:
Love it, definitely one of my favorites. My only complaint is I wish they had designed it with adjustments for battery rattle. A really thin nylon washer between the button and battery has solved that, but would have been better if the delrin piece under the button was adjustable instead.

Thank you for the feedback, I can live with that however I made the mistaken assumption that there was an adjustable delrin ring beneath the button.

I was initially after a VCP Piglet, but went with the Underground at the last minute.

Stepinrazor · May 17, 2016

StereoFreeze said:
@Stepinrazor Damn that's a lot of Kennedy's and Limitless mods!

LOL, yeah once I find something I like I kinda go with it.

The Underground is sort of a departure for me, as I mainly own tube mods, am looking forward to using a Series mod.

Zamazam · May 17, 2016

I got a Kennedy Ruby in Copper for a pittance, it's the real deal. With a dual parallel SS316L Coil setup, It is probably the best cloud buster I have.

AlbyKortoona · May 17, 2016

raymo2u said:
No they only made a thousand and I would be careful who you buy from...I was told mine was Authentic and I paid a decent amount for it thinking it was real and after I killed it Gheed warned me that it was a fake....That kind of pissed me off a bit. Im looking into a Lipo Custom Box to replace it or a 252 Box Mods 6 18650 Box...You can buy a "Hydra" which is a HOG clone on Fast tech or Ebay for around $40-50 and as long as you build higher then .04 you should be fine using it...

There's two ads on e bay right now for New Authentic Hammer of God V2's. You know they have to be real 'cause they have an authenticity card, says so right in the ad. :yes:

One of them is only $130 too. Those assholes need a swift kick in the nuts.

I wonder if all the clones are the same. Focalecig has one for $44. Could it possibly be better than the e bay clones? I have almost bought one of the clones a couple times but keep getting talked out of it.

Gheed · May 18, 2016

martnargh said:
Stacked tubes have been around for a long time, they were frowned upon by some at one time... theyre coming back now... av able mods have stacked attachments that you buy and they use the same switch from the original tube... so you can choose to use your able stacked or nonstacked, i think this stacked tube works on most av mods, all sleeved mods anyway... thatll probably be my next big buy. A sweet av setup.

Sent from my SM-N920T using Tapatalk

Isn't AV coming out/already have a stacked Able?

martnargh · May 18, 2016

Av has stackable set works with a bunch of their tubes including ables...

Sent from my SM-N920T using Tapatalk

zdawk · May 20, 2016

Don't act like you're not impressed!

anavidfan · May 21, 2016

Loving this set up, feeling proud of myself because Ive never enjoyed a Genesis that I finally built right.
MCR SL (20mm) with the MCR 303 Genesis

Stepinrazor · May 27, 2016

My new MCM Underground Series Mod

anavidfan · Jun 24, 2016

My Mech collection just got updated. Traded a beloved GP X 1.5 for this ELA V1. Yes, the X performs better , but damn if this doesnt look gorgeous.

Mythical_OD · Jun 24, 2016

Stepinrazor said:
View attachment 52439 My new MCM Underground Series Mod

Nice! I have an Underground too, but mine has the mirror/satin "X" pattern on the sides instead of that badge. That one looks nice though

Stepinrazor · Jun 25, 2016

Mythical_OD said:
Nice! I have an Underground too, but mine has the mirror/satin "X" pattern on the sides instead of that badge. That one looks nice though

Thanks I have a resin one as well

anavidfan · Apr 3, 2017

Freejep · Apr 3, 2017

You may be able to tell I'm a fan of the "so horney's"....

BreSha6869 · Apr 5, 2017

Bit of a mess, but you get the point.

Front row and the squonkers are authentic and the rest are clones. I use almost all of them every few weeks with most of the love going to Gus and GP Paps.

anavidfan · Apr 5, 2017

BreSha6869 said:
Bit of a mess, but you get the point.

Front row and the squonkers are authentic and the rest are clones. I use almost all of them every few weeks with most of the love going to Gus and GP Paps.

WOW, very nice ( envy)
I recognize most of the front row, but what are those tubes/ mods?

If you could ID them for me? Please?

GratefulAlvin · Apr 5, 2017

This is most of my mechs, I have a el diablo samael parallel box with baal v4 rda its neon yellow with matching drip tip that's not in the picture

CashNVape · Apr 6, 2017

GratefulAlvin said:
This is most of my mechs, I have a el diablo samael parallel box with baal v4 rda its neon yellow with matching drip tip that's not in the picture

is that the t6 raptor? if yes, how do you like it? know where I could get one?

GratefulAlvin · Apr 6, 2017

CashNVape said:
is that the t6 raptor? if yes, how do you like it? know where I could get one?

No its a g.i mods philippines aventador v1 funny though the shop I got it from had a raptor which I wanted but was sold by the time I got the funds, the same shop has a raptorv1 with all silver internals right now though but a bit too rich for my wallet atm.

CashNVape · Apr 6, 2017

the only thing that matches the Virtus is my doge v1 but I hate that rda lol maybe I should see if the newer versions are a better fit over the v1.
anyways, left to right;
chi you megan clone (upgraded contacts, magnet switch etc hits hard!) & Pegasus RDA, scndrl brass & subzero22, Virtus & Venturi trinity glass tip, oros v2 & piece of shit clone glacier v2. got the Buddha rda in copper today but it doesn't have the same copper tone, thinking about making both patina for a matchy fit BUT the mini Buddha works best on a box mod due to the massive airflow.
all rdas range between 0.15 & 0.20 ohms.

Sent from my SM-G900V using Tapatalk

BreSha6869 · Apr 6, 2017

anavidfan said:
WOW, very nice ( envy)
I recognize most of the front row, but what are those tubes/ mods?

If you could ID them for me? Please?

View attachment 78809

Those are House of Hybrids. Really well made mechs. I love the Chinese characters.,They spell "Made in USA"!

anavidfan · Apr 6, 2017

BreSha6869 said:
Those are House of Hybrids. Really well made mechs. I love the Chinese characters.,They spell "Made in USA"!

Love those, Ive seen them for some time, but for some reason I thought they were not 510 contacts and could only be used with a Zenesis atty.
Ive seen them in many amazing colors, textures and finishes. Might have to take a look at them again.

What diameter are they? and I wonder if they are 20 x ...darn cant remember , but GP, GUS, JM and many have compatible threading.

BreSha6869 · Apr 7, 2017

anavidfan said:
Love those, Ive seen them for some time, but for some reason I thought they were not 510 contacts and could only be used with a Zenesis atty.
Ive seen them in many amazing colors, textures and finishes. Might have to take a look at them again.

What diameter are they? and I wonder if they are 20 x ...darn cant remember , but GP, GUS, JM and many have compatible threading.

Standard 22mm. Here are a couple of bad pics, but the threads on these HoH mods are monstrous. Not compatible with GP or Gus.

Standard 510 though...

Coletrain182 · Apr 22, 2017

Here's my collection. Took picture a couple of weeks ago. And added 4 more since then. All authentic AV, Comp Lyfe, Rogue, Limitless, VGOD, Broadside, Rig V2, TVL. And probably a couple I missed. Needless to say I love Mechs. Lol

Sent from my iPhone using Tapatalk

dclopez6600 · May 19, 2017

Sent from my iPhone using Tapatalk Pro

r055co · May 23, 2017

This is about 1/2 my collection, I'm still attempting to get it organized and under control

bx10r · May 23, 2017

Mine as of today

pulsevape · May 23, 2017

anavidfan said:
Loving this set up, feeling proud of myself because Ive never enjoyed a Genesis that I finally built right.
MCR SL (20mm) with the MCR 303 Genesis

great mod....wasn't too impressed with the 303 though...I think I still have it around here somewhere.

Whats Your Mechanical Collection Look Like?

Attachments

My name is Lucy and I am a squonkaholic

Evil Vulcan's do it with Logic

Attachments

Attachments

VU Sponsors