I think the new bigger one might but not the old 22 mm one.
Become a Patron!
Squonkers are Bonkers
- Thread starter DogMan
- Start date
Yeah, learned that the hard way. Actually, no biggie, I planned on using the Tsunami on a non-squonker anyway. I just ordered the windowed 24 and a couple of Hasturs.
Fast Tech of course, has a Origen Little clone for less than $10. Figured I would try a different rda to try something different.
The Origen Little is great! It was my first BF atty and I almost hate that I sold it. Had to move onto new things though, fasttech also has a new narda clone that comes with the BF pin. If you are ok with 22mm attys, the narda is the top dog IMO! Can't speak to the clones quality though.
ShitI ordered 20th Aug mate ...
Hope they come soon Dan
Probably stuck in sunshine west or Granville. Where parcels go to die
Sent from my LG-H815 using Tapatalk
Hank F. Spankman
Platinum Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Some Tugboat love today
Yours and Simon's ... his tracking says the same
Probably stuck in sunshine west or Granville. Where parcels go to die
Sent from my LG-H815 using Tapatalk
Mine never came with tracking ...
Alright.
Fast Tech decided to play nice for me this morning. I finally got to look at their listed narda clones. Searched for them in the past to no avail. They do look to be good rdas and I might need to try one for under $10 later on. I'm broken in on the Velocity V2 decks and like them for their overall capacity and ease for building. But yes, I see the nardas and do think I might genuinely try one. I had thought about trying the Goons too but have kind of talked myself out of them, not sure why. Need to catch up to myself to ask about that.
The Narda clone I got from FT for around $12 is good quality.
A few recently have mentioned tight draws. Thought I would share this build by studiovape from avf.
Nice little build if you run higher resistance and tight draw. Not my thing, but worth trying if it is your style
Sent from my LG-H815 using Tapatalk
Nice little build if you run higher resistance and tight draw. Not my thing, but worth trying if it is your style
Sent from my LG-H815 using Tapatalk
Hank F. Spankman
Platinum Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Alright.
I'm broken in on the Velocity V2 decks and like them for their overall capacity and ease for building. But yes, I see the nardas and do think I might genuinely try one. I had thought about trying the Goons too but have kind of talked myself out of them, not sure why. Need to catch up to myself to ask about that.
Get the 316SS one Morely. It takes a Fatdaddy M3 pin
Thinking later I might break out the drill and convert my Derringer clone to bf, don't really use it as a regular atty but could see it getting use squonking. Hoping it'll work, if not I'm only out like $5 so not super worried
Sent from my SAMSUNG-SM-G930A using Tapatalk
Sent from my SAMSUNG-SM-G930A using Tapatalk
Been trying to get a good build for a infinite clt v2 that I converted last year but always seems like it's way to airy with muted flavor :/ converted it after it had a mishap on my 4nine and melted the insulator which I fixed
Sent from my SAMSUNG-SM-G930A using Tapatalk
Sent from my SAMSUNG-SM-G930A using Tapatalk
FT now has the Coppervape BF mods repair kits in stock.
Just ordered 6.
Just ordered 6.
How do you tell if you have the v1 or v2?
Sent from my SAMSUNG-SM-G930A using Tapatalk
I took mine apart and compared pics with my parts.
Mine are V1.
According to FT's pics. The button is quite different .
Hank F. Spankman
Platinum Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Yeah, fuck that noise
Last edited:
f1r3b1rd
https://cookingwithlegs.com/
Staff member
Senior Moderator
VU Donator
Diamond Contributor
VU Challenge Team
Member For 5 Years
VU Patreon
fuck that noise... I love my NaRda but they can kiss my left testicle before I pay that for an rda
I like my NarDa clone just fine. But it is not divine nor would I pay over $30 for any atty. Too many good ones out there that are much cheaper.
But for those who like to buy the expensive vape stuff...
Enjoy it.
But for those who like to buy the expensive vape stuff...
Enjoy it.
f1r3b1rd
https://cookingwithlegs.com/
Staff member
Senior Moderator
VU Donator
Diamond Contributor
VU Challenge Team
Member For 5 Years
VU Patreon
I'm no stranger to expensive gear; and I have an authentic NaRda.
But, I just cant do 150 for an rda in todays market. It was a totally different landscape last year with hardware.
But, I just cant do 150 for an rda in todays market. It was a totally different landscape last year with hardware.
Yep. I buy frozen berries from Mexico cos local berries are overpriced.
Similarly, I buy cheap RDA.
2 x $450 + mods currently under construction though.
I abuse said mods. No babying of vape gear for me, they go everywhere, get scratched and dinged and dirty.
Sent from my LG-H815 using Tapatalk
Similarly, I buy cheap RDA.
2 x $450 + mods currently under construction though.
I abuse said mods. No babying of vape gear for me, they go everywhere, get scratched and dinged and dirty.
Sent from my LG-H815 using Tapatalk
Speakin of clones...
a) Tip flippin' - I'm surprised I never before popped a Loki on a Narda. I'm kinda liking it.
b) Built the clone O-16 (Origen Little). 510 threads went on ohm reader and stand, but wouldn't thread on the mod. It's a Reo though, so I forced it.
All good now. Also noticed the o-ring might be a little weak. But hey - for $10 instead of $100 I'm OK with that. The rest of the machining seems good. Cap threads are perfect. Pins held up while I torqued the fucker onto the Reo with pliers. And with that fat tip on...it's vaping just awesome!
(side note - I've got an authentic 0-16 and like it, but wouldn't have paid for another - but when the clone came out I couldn't resist.)
a) Tip flippin' - I'm surprised I never before popped a Loki on a Narda. I'm kinda liking it.
b) Built the clone O-16 (Origen Little). 510 threads went on ohm reader and stand, but wouldn't thread on the mod. It's a Reo though, so I forced it.
All good now. Also noticed the o-ring might be a little weak. But hey - for $10 instead of $100 I'm OK with that. The rest of the machining seems good. Cap threads are perfect. Pins held up while I torqued the fucker onto the Reo with pliers. And with that fat tip on...it's vaping just awesome!
(side note - I've got an authentic 0-16 and like it, but wouldn't have paid for another - but when the clone came out I couldn't resist.)
Last edited:
Ellipsis
Bronze Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
the eleaf pico squeeze was in the mailbox tonight...
put a catfish bottom fed narda clone on that sucker, its actually very nice...
what say the rest of yall that ordered this little guy
put a catfish bottom fed narda clone on that sucker, its actually very nice...
what say the rest of yall that ordered this little guy
https://www.fasttech.com/products/0/10020502/5869600-narda-styled-rda-rebuildable-dripping-atomizer
plus
fatdaddy vapes bf pin [$3 for 3 of them]
he saw you coming
Hank F. Spankman
Platinum Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Odds are, if you can see the tip of the 510 screw, one of the fatdaddy pins will work (I have a SXK Kennedy 24 2 post. The fatdaddy pins are too small tho)
Hank F. Spankman
Platinum Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
The Narda takes a M3 pin
Ellipsis
Bronze Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
[QUOTE="DogMan, post: 1397555, member: 40752"
he saw you coming[/QUOTE]
i like his work, his prices dont bother me at all...im well aware of the fat daddy pins and the diy aspect, just not my thing...
but the post was more towards the folks that ordered the pico squeeze, not about the atomizer...
he saw you coming[/QUOTE]
i like his work, his prices dont bother me at all...im well aware of the fat daddy pins and the diy aspect, just not my thing...
but the post was more towards the folks that ordered the pico squeeze, not about the atomizer...
ok
seems an odd stance to me, paying $40 extra for a nicer pin that is hidden under a cap... and then buying a $20 mod to put it on
but to each his own, however batshit it seems to me
Ellipsis
Bronze Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
ok
seems an odd stance to me, paying $40 extra for a nicer pin that is hidden under a cap... and then buying a $20 mod to put it on
but to each his own, however batshit it seems to me
i also have the halcyon dna mod, an LBC dna mod by catfish atty mods and a sunbox E7.5...and a handful of bottom fed atomizers going back to 2011...
i buy what i want and sometimes its just for fun...put me down with your "batshit" and "he saw you coming" comments all day long , its not gunna stop me from being me...
JuicyLucy
My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Still waiting....
Ellipsis
Bronze Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
http://www.heavengifts.com/50W-Eleaf-Pico-Squeeze-MOD.htmlWho did u order the Eleaf Squeeze from? Mine has not arrived from GearBest yet.
Damn, for 30 bucks I may try one, always liked the look of that lil mod, add a squonk it's a +
I would get one but it is not regulated.
That's the main reason I want one. I've been really digging my mech.
I'm not crazy, my mother had me tested.