Crown Uwell tank issues

Do mean the D2 tank? Sounds like your replacement coil isn't screwed in hard enough. Really screw that suck on there. That would be my first guess. But when you say the juice is going into the bottom portion, my impression is the brown is pooling and the heat from the coil is cooking it. Again, the coil isn't screwed as freakin' tight as you can get it. Clean the threads inside the bottom with a cotton swab, detergent or vodka. Not regular alcohol. That's the only thing I can think of for the leaking and you sucking up juice because it's the only way juice can get into your air channel. Also, make sure you have both o-rings on your coil replacement if it doesn't look thick enough to completely seal the the coil, as with the first batch of coils that came out, you can buy extra 510 o-rings. I think I got mine at FT or GB for under $1. About the drip tip, try a few others. I found that 510 drip tips, depending on the vendor, are a hair too small or a hair too big. That's why I pay a little extra for mine. And they fit fine. Again, clean your drip top o-rings so the ejuice doesn't cause it to be too loose and easy to let air or juice get to it. That's what I would do. I've had no problem with either tanks.

I hope this helps. I have a Crown 2 and and a D1 and read the same thing I wrote above. I'm not saying I'm right though.

vapelifesaver said:

Hello~I have 2 Crown Uwell tanks and am having odd issues or at least odd to me! First off, I am having ejuice fill up the bottom section and I take the tank and shake it onto a tissue and it is a very dark brown color that comes out~although the ejuice is 70vg/30pg blond color. It doesn't matter what I put into either tank, the same thing happens. Really could use some help on this one.
Secondly I have a resin drip tip that I have been using and I put in on snugly, not to tight and the ejuice is pooling just underneath it and also ejuice is coming up through the tip and I'm swallowing it- ugh!
Again, any help is greatly appreciated

Click to expand...

Don't know about the first part but I have the same issue on the second, juice pooling under the driptip. That is from the condensated (not an actual word, I know) juice from the center or chimney. All I do is once or twice a day, stick a qtip or two down the center and get the residual juice out... makes for a much cleaner fresher vape.
Just to add I don't have the same tank as you just the same issue. The only time I have the first issue is when I forget to close my juice fill holes