Joyetech CUBOID 200 *NEW*

Joyetech CUBOID 200 *NEW*

Having the glossy zinc alloy shell with its premium finish, the CUBOID 200 provides durability and reliability in its one of a kind style. Featuring 3 replaceable high-rate cells, it can be powered to 200W. The CUBOID 200 has a 0.96-inch OLED display, supporting VT/VW/TCR modes as well as real-time-clock, preheat and custom logo functions. Meanwhile, it is designed with upgradeable firmware with which you can keep the CUBOID 200 up-to-date.

Product Parameters:
Size: 22.00mm*63.00mm*99.00mm
Colors: Silver, Grey, Black
Output mode: VW/VT (Ni, Ti, SS316)/TCR mode
Output range: 1-200W
Resistance range: 0.05-1.5ohm under VT/TCR mode
0.1-3.5ohm under VW mode
Recommend cells: high-rate 18650 cells (CDC 25A)

200W maximum output with triple cells
Cuboid 200 is powered by three replaceable 18650 cells, where maximum output can be reached to 200W. Battery status will be displayed with three separate bars. Please always use married cells with continuous discharge current (CDC) 25A.

Flexible battery cover for easy exchange
The Cuboid 200 back cover enables to replace the batteries with great ease. Always pay attention to the battery installation marks (+/-) when installing new batteries.

Reverse polarity protection and dual circuit protection
The onboard reverse polarity protection, as applied in the Cuboid 200, will protect the device from damages in the event of reverse battery installation. It also adopts the dual circuit protection system, realizing overall battery protection of over-charging, over-current and over-discharging, which makes the Cuboid 200 a total safe and reliable device.

Preheat function for advanced vaping
The Cuboid 200 comes with the fashionable preheat function, which allows the device to start at a high output for a few seconds to warm up. This is especially an essential when using an RDA, RTA or the ceramic heads.

Clear and large OLED screen for easy operation
The OLED screen was placed on the top. This large screen present all information clearly and an be regulated in a easy way.

Exquisite 510 stainless steel thread
Applied with 510 stainless steel thread and wide border fitting for large capacity atomizers.


Standard Configuration:
1 * Cuboid 200 (no cell)
1 * USB Cable
1 * Manual
1 * Warranty Card
1 * Warning Card

Spotted here:

https://www.heavengifts.com/product/Joyetech-Cuboid-200-TC-Box-MOD.html

Although I'll probably own one (I'm silly that way), I don't think I like this... Hmmmm....

Sent from my SAMSUNG-SM-N910A using Tapatalk

I think it looks pretty good. Im liking the clean and simple design.

HaileStorm said:

I think it looks pretty good. Im liking the clean and simple design.

Click to expand...

I agree. I think it looks very sleek! I'd have to see one in person though to make sure

The 2 main problems with the original Cuboid were the crappy 510 and a low (25A) limit of the chip, so has it been addressed?

The original Cuboid reached 200 when updated so calling this Cuboid200 is kinda confusing and besides if it's not cube shaped why is it even called a Cuboid? Looks more like an Istick 100W, sounds to me like an attempt to cash in on previous success.

nightshard said:

The original Cuboid reached 200 when updated so calling this Cuboid200 is kinda confusing and besides if it's not cube shaped why is it even called a Cuboid?

Click to expand...

You have a point there they should've just called this mod something else completely.

nightshard said:

The 2 main problems with the original Cuboid were the crappy 510 and a low (25A) limit of the chip, so has it been addressed?

The original Cuboid reached 200 when updated so calling this Cuboid200 is kinda confusing and besides if it's not cube shaped why is it even called a Cuboid? Looks more like an Istick 100W, sounds to me like an attempt to cash in on previous success.

Click to expand...

Besides the stupid name it looks to be an improvement I'm sure the 250w firmware upgrade is already done too. It's probably using the exact same chip as the RX200s and I stick 200

Love the design so sleek


Sent from my iPhone using Tapatalk

Love the form factor, was never a huge fan of the RX style of handling 3x18650. Ive got large hands, so a mod that is long is no issue to me to carry. My biggest gripe, and the reason that, as much as I like the new version, I will pass on it, is due to the fact that it is 22MM wide, and that is it. If they had just added another 2-3mm all around this device would have been an absolute winner, but because it cannot fit anything 24/25mm without gross overhang on all sides, thats an instant do not buy for me.

shawn.hoefer said:

Although I'll probably own one (I'm silly that way), I don't think I like this... Hmmmm....

Click to expand...

I hate to admit it but I'm right there with ya.

It looks like a mix of an IstickTC100 and a Laisimo S3.

Someone needs to start making mods for 30mm tanks.

McAnythingReally said:

Love the form factor, was never a huge fan of the RX style of handling 3x18650. Ive got large hands, so a mod that is long is no issue to me to carry. My biggest gripe, and the reason that, as much as I like the new version, I will pass on it, is due to the fact that it is 22MM wide, and that is it. If they had just added another 2-3mm all around this device would have been an absolute winner, but because it cannot fit anything 24/25mm without gross overhang on all sides, thats an instant do not buy for me.

Click to expand...

I'm with you. A 22 mm width on a 3 battery, 200W mod doesn't make sense with today's larger tanks. I do like the idea of a top display, although this one looks kinds low res.

Paratech said:

I hate to admit it but I'm right there with ya.

It looks like a mix of an IstickTC100 and a Laisimo S3.

Someone needs to start making mods for 30mm tanks.

Click to expand...

I was thinking more Smok/Koopor Primus with the cheese grater removed...

For 30 mm atties, check out the Hcigar VT75, Wismec Presa 100, Sigelei Snow Wolf 218, and the Ijoy Lux 215.

Sent from my SAMSUNG-SM-N910A using Tapatalk

HaileStorm said:

You have a point there they should've just called this mod something else completely.

Click to expand...

The Joyetech Ovaloid?

Sent from my SAMSUNG-SM-N910A using Tapatalk

shawn.hoefer said:

I was thinking more Smok/Koopor Primus with the cheese grater removed...
For 30 mm atties, check out the Hcigar VT75, Wismec Presa 100, Sigelei Snow Wolf 218, and the Ijoy Lux 215.

Click to expand...

Tried the VT75 but the single battery just doesn't do it for me.



The LUX on the other hand are perfect.




Just in case anyone thought the IJOY MAXO was going to work, it'll only suffice if you do NOT have OCD.
For me this is a NO GO!

Paratech said:

Tried the VT75 but the single battery just doesn't do it for me.

View attachment 67313

The LUX on the other hand are perfect.

View attachment 67308 View attachment 67309 View attachment 67310 View attachment 67311 View attachment 67312


Just in case anyone thought the IJOY MAXO was going to work, it'll only suffice if you do NOT have OCD.
For me this is a NO GO!

View attachment 67314 View attachment 67315 View attachment 67316

Click to expand...

Is that their blue or a wrap? I've got the yellow...


And only 1 Lux...



Sent from my SAMSUNG-SM-N910A using Tapatalk

shawn.hoefer said:

Is that their blue or a wrap? I've got the yellow...

And only 1 Lux...

Click to expand...

SAPPHIRE BLUE
Turned out to look better than I anticipated.

Paratech said:

Tried the VT75 but the single battery just doesn't do it for me.

View attachment 67313

The LUX on the other hand are perfect.

View attachment 67308 View attachment 67309 View attachment 67310 View attachment 67311 View attachment 67312


Just in case anyone thought the IJOY MAXO was going to work, it'll only suffice if you do NOT have OCD.
For me this is a NO GO!

View attachment 67314 View attachment 67315 View attachment 67316

Click to expand...

What tank is that on the vt75?

Another pic

HaileStorm said:

What tank is that on the vt75?

Click to expand...

Ohmega Alpha BFT.
I'm liking it a lot.
The other one is the Ohmega Beast.
Also posted the Wismec Inde DUO and CCI Triforce.
The 30mm Triforce WAS awesome until I stripped the threads on the top cap.

Ramsay Bolton said:

Another pic
View attachment 67324

Click to expand...

Wow, adding the silicon skin totally changed the look.
I like it WITH it.

The more I look at this, the more I think I like it.

Paratech said:

Ohmega Alpha BFT.
I'm liking it a lot.
The other one is the Ohmega Beast.
Also posted the Wismec Inde DUO and CCI Triforce.
The 30mm Triforce WAS awesome until I stripped the threads on the top cap.

Click to expand...

Thank you, paratech!

Would you have any idea how it compares in size to the serpent mini 22?

HaileStorm said:

You have a point there they should've just called this mod something else completely.

Click to expand...

Should of called it... I know its 22mm so fucking what-oid.

HaileStorm said:

Thank you, paratech!
Would you have any idea how it compares in size to the serpent mini 22?

Click to expand...

Sorry, I don't have a serpent.
But I can tell you without looking the 30mm Alpha BFT is 8mm wider than the 22mm serpent.
lol
But for pics, try looking at these:
https://cdn1.bigcommerce.com/server...a_BFT_3_M__01755.1465517367.1280.1280.jpg?c=2
http://www.wotofo.com/media/catalog...ab33525d08d6e5fb8d27136e95/s/e/serpent-05.jpg
https://cdn1.bigcommerce.com/server...pha_BFT_4__92028.1465514193.1280.1280.jpg?c=2
http://www.wotofo.com/media/catalog...5d08d6e5fb8d27136e95/s/e/serpent-black-06.jpg
I think they'll show you what you're after.
Got it for $26.65 from code3vapor but I don't think their site is up right now.
Don't know if they closed the doors are just have web issues.

Paratech said:

Sorry, I don't have a serpent.
But I can tell you without looking the 30mm Alpha BFT is 8mm wider than the 22mm serpent.
lol
But for pics, try looking at these:
https://cdn1.bigcommerce.com/server...a_BFT_3_M__01755.1465517367.1280.1280.jpg?c=2
http://www.wotofo.com/media/catalog...ab33525d08d6e5fb8d27136e95/s/e/serpent-05.jpg
https://cdn1.bigcommerce.com/server...pha_BFT_4__92028.1465514193.1280.1280.jpg?c=2
http://www.wotofo.com/media/catalog...5d08d6e5fb8d27136e95/s/e/serpent-black-06.jpg
I think they'll show you what you're after.
Got it for $26.65 from code3vapor but I don't think their site is up right now.
Don't know if they closed the doors are just have web issues.

Click to expand...

I see, i didnt realize it was a 30 anyway, thank you

I wonder how well the battery door stays on.

HaileStorm said:

I see, i didnt realize it was a 30 anyway, thank you

Click to expand...

I was just being a smart ass.

I think the white skin would look good on the black mod.
Wonder how many color options they'll have for skins.

It sure does look very neat.
I must admit, though, that my days of needing that sort of Firepower are, probably, long gone-- I don't seem to go about 60-70 watts, ever, these days.
Sweet looking Mod, though.

Sent from my SM-N910C using Tapatalk

haybill said:

It sure does look very neat.
I must admit, though, that my days of needing that sort of Firepower are, probably, long gone-- I don't seem to go about 60-70 watts, ever, these days.
Sweet looking Mod, though.

Sent from my SM-N910C using Tapatalk

Click to expand...

The attraction for many would be the 3 battery feature that will get most people through the day
rather than it's 200w output capacity. I rarely go over 30 watts myself.

Yes, I totally understand that. I'm not saying it's an unattractive beast, just that I am never likely to need it's high power; it would probably get me through a week without a recharge.

Sent from my SM-N910C using Tapatalk

I ALMOST pre-ordered this.
The 2 things that stopped me were I don't like pre orders and I don't have many 22mm tanks.
Of the ones I have, I don't need the extra battery life for because I don't use them enough.
It sure is sleek looking but the 22mm is controversial for me.
We'll see how I feel about it in a day or 10.