Killin itHelix SSFC:
Become a Patron!
Post your builds
- Thread starter Vape_geek
- Start date
Thanks everyone. Widowmakervapor said he'd give me some pointers on the helix staggering. It vapes like a naked staple.
@raymo2u
How many pulls can you get off drippers like the Goon?
All the RDAs I have are 22mm except the velocity clone. Not much run time before you need to re-drip.
I'd love to have a goon deck and the LP looks great. I thought the massive center posts were too big and took up space but I see people putting big builds in them.
Maybe it's good they take up some chamber space.
Nice write up btw.
@raymo2u
How many pulls can you get off drippers like the Goon?
All the RDAs I have are 22mm except the velocity clone. Not much run time before you need to re-drip.
I'd love to have a goon deck and the LP looks great. I thought the massive center posts were too big and took up space but I see people putting big builds in them.
Maybe it's good they take up some chamber space.
Nice write up btw.
The LP is a 24mm, its just 5-6mm shorter then the Goon, depending on your build you can get 3-10 draws off of it. The build Im using closer to 10 draws before I sense a lack in taste and need to redrip.. You can fit 3.5mm coils in them but only if you did 5 wraps or less....its around the same amount of build space as the Tsunami rda, most recent RTA's....you can get away with some crazy stuff but you dont really need it for a amazing vape.
This is why I like clones, most people dont like them due to social stigma and the elitist but I see them as a test run, a way to see if the shoes fit without wasting all your cash to find out...if you do like it then save up for the authentic...if not then you lost $12.....not a big loss to see if the hype is worth the fit
I love the Tsunami but I really want clamps. Other than the Goons, Azeroth and iJoy Combo I can't think of anything.
I'd be happy with a Kennedy styled post too. Just anything that will take wide wire and doesn't apply tension from the side. I hate my first and last wrap being torqued on like that.
I'd be happy with a Kennedy styled post too. Just anything that will take wide wire and doesn't apply tension from the side. I hate my first and last wrap being torqued on like that.
My same complaint about "velocity" style posts :/
Sent from my iPhone using Tapatalk
CrazyChef
Custom Hand Crafted Coils - PureCoils.com
VU Vendor
VU Donator
Platinum Contributor
Member For 4 Years
ECF Refugee
So I wanted to make something for the G2 I just got. The binding is pretty messed up, but other than that it came out okay I guess. I was in a hurry and wasn't really concerned about the evenness of the bind.
10x0.5K/44N, 24N frames. 0.06Ω
10x0.5K/44N, 24N frames. 0.06Ω
It kind of reminds me of a snake or reptiles skin over a rigid bone structure....it looks pretty crazy!
How do you like the G2 so far Chef?
CrazyChef
Custom Hand Crafted Coils - PureCoils.com
VU Vendor
VU Donator
Platinum Contributor
Member For 4 Years
ECF Refugee
This is the first time I've used it. I think I want it mostly for mixed wire low resistance TC. In wattage mode, this coil tastes like crap for some reason. Using Cotton Bacon and the same DIY Froot Loops juice that I've been using for over a week now. The RDA is a Velocity V3 clone.
I dont see why it would taste bad, the coil position and height looks perfect...the most you can do now is play with the AFC and wattage...
Oils on the cotton/coil from wicking or installing the coil? Thats what I normally find it from...Ive been washing my hands prior to building and then wicking every time and using tweezers to pull the cotton through because of this..it can become annoying.
Im very happy to now have a small USC for this reason...it used to take a bit to wash every piece, now I break it down as much as i can and toss it in and give it a 6 minute run, then rinse and its ready
What atty is that? Looks like an awesome build deck.
I'm not crazy, my mother had me tested.
Get the obese Buddha 35mm RDA by vaporz cloud this thing is the best RDA I've ever built on and it has a 10ml juice well and big clamps for ANY BUILD U WANT
I definitely will. I love the clamps on it. That looks sick!
I'm not crazy, my mother had me tested.
Best rda to date in my opinion. I'd like someone to show me a better one
bet they can not
Cool, I like the posts.Got the Goon LP Clone today....its funny that the clone came out before the authentic and the only differences I can see comparing to pictures from my friend on the Team_Goon are Oring Color (Black version should have Red Rings), Clamps are polished (Should look casted/grainy), and the serial/lettering on its underside are deeply engrave (Should be painted/lasered on)
I would say the quality of this certain clone is pretty high, Ive had authentic goons that were lower quality....
The airflow is loose and smooth and easy to adjust.
The Juice well isnt crazy deep but its about the same as twisted messes rda. From what I see its squonk friendly!
The post system is massive and takes a large amount of the chamber up, after you install your coils there is just room for air to slip around the coils and come up to your mouth....this and the shortened stature makes it a awesome flavor rda...even with the airflow almost wide open the flavor is as good as the normal goon with 2 holes open but the air resistance is similar to 3 holes open.
Installation takes a bit of finesse but after the first time its pretty easy to build on, just make sure your leads are the needed length. You install the coils like a postless deck then pull them downwards and make them level with the posts. I think the bending around the clamps, as well as being secured to the posts gives a better connection as there are more contacting points on the leads.
It comes with a Ultem Comfort Cap and a preinstalled Tip, this clone can take normal Goon/Kennedy Tips too. The pin is made of copper and protrudes, so its safe to use on hybrids. I do warn that if you build low in this one you will burn your lips off if not using the Ultem cap, the cap is only sitting a few mm's away from the cap.
When I get the Authentic on hand I may do a fully orchestrated comparison, this is just what Ive gathered so far.
Pics:
Link to the same Clone
Sent from my Nexus 6 using Tapatalk
What usc setups yall running?Im very happy to now have a small USC for this reason...it used to take a bit to wash every piece, now I break it down as much as i can and toss it in and give it a 6 minute run, then rinse and its ready
Coilmaster for small stuff and a Remington for bigger stuff
Exactly what I want. Love bottom air flow.
It's like it was made for me.
Too much chamber space for me.
CrazyChef
Custom Hand Crafted Coils - PureCoils.com
VU Vendor
VU Donator
Platinum Contributor
Member For 4 Years
ECF Refugee
Get the obese Buddha 35mm RDA massive clamps and build room and 10ml juice well
Dude I want that mod!! Where's a good place to get one?Not as pretty as @raymo2u coils but works awesome in the VCP Boss. 29x2/36 @ 0.65 ohms this baby hits hard, awesome flavor and chucks pretty damn thick plumage! Fogged up the Apartment in no time.
Sent from my Nexus 6 using Tapatalk
Nice build btw!! Better than I could do! Gotta get a drill soon..
Anybody know where to find this coil jig in the states? http://www.ebay.com/itm/262240789427?ul_noapp=true I'd rather not pay for international shipping...
Edit* Nvm I found it...
Edit* Nvm I found it...
Last edited:
For my alien builds I like the little notch cutout in this jig also going to use it for other flat builds
Sent from my iPhone using Tapatalk
Well just ordered one I didn't know coil master had one with the little notch
Sent from my iPhone using Tapatalk
I hate shoving shit in your guys faces but....Aeronaut just sent me this gem..
I may have lost on coilwars but Aeronaut decided to sponsor me and Teddy_dampft (my team member) as he has enjoyed everything that we've done so far, I was told it was a rainbow Aeronaut V2 Limited Edition and I was thinking thats cool but a bit weird....turns out in Sweden Rainbow is the same as Chameleon!
Tossed a Hybrid Framed Staple into it...At .33 Ohms it didnt work very well on my Tres Equis, so I tossed it on the Hohm Wrecker G2 at 100w and its explosive!!
Also made a Grooved Fused Stagg for the TM24!
I may have lost on coilwars but Aeronaut decided to sponsor me and Teddy_dampft (my team member) as he has enjoyed everything that we've done so far, I was told it was a rainbow Aeronaut V2 Limited Edition and I was thinking thats cool but a bit weird....turns out in Sweden Rainbow is the same as Chameleon!
Tossed a Hybrid Framed Staple into it...At .33 Ohms it didnt work very well on my Tres Equis, so I tossed it on the Hohm Wrecker G2 at 100w and its explosive!!
Also made a Grooved Fused Stagg for the TM24!
Nice dude. Looks really cool.
That is very tidy for your first ever clapton- my first one had a few bits missing and also some lumps where the wire had bunched up.
The outer is a bit thick like you say, but you may actually like a thick outer wrap. We all like different things, so it is worth a try
.
mikekscholz
Member For 4 Years
I finally pulled off my first proper 3 cored aliens!!! 3x 28K/36N80 6 wraps on 2.5mm, 0.23 ohms mounted in my petri rta. These have such better flavor than the alien framed staples they replaced.
![IMG_1931[1].JPG](https://vapingunderground.com/data/attachments/68/68591-2a62748b48063fcf71476a46edea9404.jpg "IMG_1931[1].JPG")
My first set of semi successful Clapton coils!! Keep in mind they are 26G ss316l core wrapped with 26G nichrome 80 so they were Hella springy and there for thy aren't too pretty but they vape good and it's practice for when I get my 36 G n80 wire in 
Thank you! It took a few trys and like I said I didn't wanna wait for my 36G lol my second ones didn't turn out too well they were super springy for some reason so they weren't close together at all they ended up spaced coils haha! But they vape well!That is very tidy for your first ever clapton- my first one had a few bits missing and also some lumps where the wire had bunched up.
The outer is a bit thick like you say, but you may actually like a thick outer wrap. We all like different things, so it is worth a try
Use AV Wingman sleeve on your SMPL 350 and a heat sink for a Clapton Tool Mod. If you use a mod that allows stacking 350s (Vertex, Panzer, Vanilla) you can go double speed @ 8.4v.
It'll run up to 12v.
Slap it in a vice or clamp and your good to go. I'll post a pic of my stacked Clapton tool later on. I picked it up for less than 10$ - It's not a drill, but it's very handy when stacked.
It'll run up to 12v.
Slap it in a vice or clamp and your good to go. I'll post a pic of my stacked Clapton tool later on. I picked it up for less than 10$ - It's not a drill, but it's very handy when stacked.
What do you mean?Use AV Wingman sleeve on your SMPL 350 and a heat sink for a Clapton Tool Mod. If you use a mod that allows stacking 350s (Vertex, Panzer, Vanilla) you can go double speed @ 8.4v.
It'll run up to 12v.
Slap it in a vice or clamp and your good to go. I'll post a pic of my stacked Clapton tool later on. I picked it up for less than 10$ - It's not a drill, but it's very handy when stacked.
You got a AV sleeve, a heatsink and a 18350 SMPL for less then $10? How does it clapton without a motor? No real control on speed and you need to hit the button to run it?
a Drill or Dremel and a Spool Tamer for less then $30 altogether makes the perfect setup that does much more then just clapton.
a Drill or Dremel and a Spool Tamer for less then $30 altogether makes the perfect setup that does much more then just clapton.
Hey where's a good place to get a spool tamer? Never thought of that