Become a Patron!
30mm SUPREME RDTA/RDA PLUS
- Thread starter ej1024
- Start date
Just too tight!
I am eager to see what yall have to say about this tank. I have been eyeing it since I first heard about it.
Mine should be here on Monday!
SirRichardRear
AKA Anthony Vapes on Youtube
VU Donator
Diamond Contributor
Member For 3 Years
Reviewer
Thank you. Nicely done!
You need a new DT
Yup
SirRichardRear
AKA Anthony Vapes on Youtube
VU Donator
Diamond Contributor
Member For 3 Years
Reviewer
I was thinking the tfv8 tip would fit. NiceKennedy and TFV8 drip tips fit
Sent from my SM-N910P using Tapatalk
Sent from my SM-G935V using Tapatalk
Kennedy and TFV8 drip tips fit
Sent from my SM-N910P using Tapatalk
I
️ IT MAN NICE FUCKING SET UP
Kennedy and TFV8 drip tips fit
Sent from my SM-N910P using Tapatalk
How much overhang does it have on the 300?
The overhang in the front is the same as the RX200. If it didn't have overhang I would have been tempted to buy it.
I took that pic at my local vape shop, the guy behind the counter wanted to see how a 30mm tank looked on it. The RX300 is too bulky for me but the finish on it was real nice, much better looking in person.
Sent from my SM-T900 using Tapatalk
Are those friction fit as well?
I found my answer..Google is your friend.
Would a drip tip with an oring be easier to get on and off? If so is the tfv8 the only drip tip that fits?
I found my answer..Google is your friend.
Would a drip tip with an oring be easier to get on and off? If so is the tfv8 the only drip tip that fits?
This Kennedy drip tip looks nice but be warned. It is wide so you have to remove it to refill the tank which is a bit of a pain
Sent from my SM-N910P using Tapatalk
Kennedy 22 tip?
There are some TFV8 drip tips that have orings, definitely easier to get off. Luckily it is 10ml of juice so refilling is not as often....lol
Sent from my SM-N910P using Tapatalk
I am not sure, was at a vape shop and we found out it fit so I bought it.
Sent from my SM-N910P using Tapatalk
Mine just got delivered. put coils in in (dual 3.8mm fused claptons 2X28G 316L / 36G 316L, 9 wraps) but have to wait until I can step outside to fire them and wick them... I should mention, I HATE WAITING!!
AAAAAnnndd, I just popped on of the leads on one of the coils.... Now it has a simple 22g Kanthal build, 8 wraps 3.8mm spaced. Gonna go out and try it in a minute.
What wattage are you hitting those coils at?
Is there any condensation building up on those airflow holes ? That shit drove me nuts on the Bellus tank.Kennedy and TFV8 drip tips fit
Sent from my SM-N910P using Tapatalk
SirRichardRear
AKA Anthony Vapes on Youtube
VU Donator
Diamond Contributor
Member For 3 Years
Reviewer
I haven't gotten any personally. I think the screen that covers it helps prevent it. plus the air is raised higher because the JFC is now under it which was a great idea
AND ITS ALIVE!! Hmm. Better flaavor than my Ohmega BFT, but then that might be just a placebo effect since its all new and shiney.
I was trying to work out hot spots on my other coils. I use a pwm mod, so no clue on the wattage but it was set at 5 volts. Now I'm running just a simple 3. 8 millimeter 7 wrap 22 gauge Kanthal.
The issue I am fighting now is the building is kind of narrow. Between the holes for the coil leads that is. I made some great fused Clapton's out of 24 gauge, 26 gauge, and 28 gauge, but putting enough traps to bring my ohms up high enough for my mod to fire safely the coils were too wide and I couldn't get the hot spots off the legs to go away. So now I'm back to just my simple 22 gauge Kanthal
I was trying to work out hot spots on my other coils. I use a pwm mod, so no clue on the wattage but it was set at 5 volts. Now I'm running just a simple 3. 8 millimeter 7 wrap 22 gauge Kanthal.
The issue I am fighting now is the building is kind of narrow. Between the holes for the coil leads that is. I made some great fused Clapton's out of 24 gauge, 26 gauge, and 28 gauge, but putting enough traps to bring my ohms up high enough for my mod to fire safely the coils were too wide and I couldn't get the hot spots off the legs to go away. So now I'm back to just my simple 22 gauge Kanthal
It's got good flavor for sure
Just a couple of drops but barely noticeable.
By a couple drops I mean I had to look real close....lolFUCK !!!!Thanks bro
Just cleaned the coils and rewicked, decided to take the 20ml tank for a test drive. Filled up and it going to spend the night in a pyrex glass with the jfc and afc wide open to see if it leaks.
Sent from my SM-N910P using Tapatalk
SirRichardRear
AKA Anthony Vapes on Youtube
VU Donator
Diamond Contributor
Member For 3 Years
Reviewer
Lol that looks beastlyBy a couple drops I mean I had to look real close....lol
Just cleaned the coils and rewicked, decided to take the 20ml tank for a test drive. Filled up and it going to spend the night in a pyrex glass with the jfc and afc wide open to see if it leaks.
Sent from my SM-N910P using Tapatalk
Sent from my SM-G935V using Tapatalk
Lol, more ridiculous than anything, just figured I would try it out
Sent from my SM-N910P using Tapatalk
SirRichardRear
AKA Anthony Vapes on Youtube
VU Donator
Diamond Contributor
Member For 3 Years
Reviewer
No leaks with a full 20ml of jooze overnight, afc and jfc wide openBy a couple drops I mean I had to look real close....lol
Just cleaned the coils and rewicked, decided to take the 20ml tank for a test drive. Filled up and it going to spend the night in a pyrex glass with the jfc and afc wide open to see if it leaks.
Sent from my SM-N910P using Tapatalk
Sent from my SM-N910P using Tapatalk
SirRichardRear
AKA Anthony Vapes on Youtube
VU Donator
Diamond Contributor
Member For 3 Years
Reviewer
i have a slice but no fuchai. it'll overhang on both for sure though.Anybody have one of these with a Hohm Slice or Sigelei 213?
Curious how it looks, especially top down with the overhang, before i pull the trigger
we have a running list for mods that will handle 30mm tanks without overhang
http://vapingunderground.com/threads/mods-that-handle-30mm-tanks-without-overhang.298956/
@SirRichardRear - Someone on a facebook group showed a Plus on his Lux.
That's what you used in yer video I think.
His showed a slight gap. Does yours screw down flush?
That's what you used in yer video I think.
His showed a slight gap. Does yours screw down flush?
Nothing screws down flush on my Lux
SirRichardRear
AKA Anthony Vapes on Youtube
VU Donator
Diamond Contributor
Member For 3 Years
Reviewer
IDK I'll have to double check when i get home
That sucks.
Daniel hasn't added either to his charts yet but other Ijoy mods would work with the Supreme.
http://www.djlsbvapes.com/510-connectors-length/
It's works fine it just doesn't sit flush against the tank. There's a slight gap under the tank
How bad is the over hang on a therion or a vt167? Anyone know?
Does it look bad?
Does it look bad?
SirRichardRear
AKA Anthony Vapes on Youtube
VU Donator
Diamond Contributor
Member For 3 Years
Reviewer
they have front 510 pins so probably pretty bad. IDK if anyone has both to post. I have a finder 167 and the overhang isn't terrible. just a bit on the sides but that has a centered 510 pin
I have the Sig 213, but my Aromamizers are still in the mail.....once they get in I'll snap a picture to show the overhang...one with sleeve and one w/o.
We need more pictures of this tank on different mods to see how bad overhang wil be
We need more pictures of this tank on different mods to see how bad overhang wil be