Become a Patron!

Post your builds

Th3T

Member For 3 Years
Member For 2 Years
Member For 1 Year
pretty sure he meant 28g lol. I just learned a very important lesson using 40g for the 2nd or so time. Made a 10'' stick of 8 ply .3R 28g framed alien, went to wrap the first coil and applied to much pressure causing all the wraps to slide down. Gotta pull just the end when wrapping. GG rekt. rekt.jpg
I unwound it and started messing with it more to try and see what not to do lol, I didn't have this happen on the first 40g fralien I made. Oh well try again another day.
 

raymo2u

VU Donator
Platinum Contributor
Member For 4 Years
Unlisted Vendor
Ahh I see now, for some reason I thought the core of your alien stag was only ribbon with an alien wrap over it, but I see at least from that pic its framed ribbon. Was wondering about just a plain staple coil with an alien wrap over it, if it was possible. Only because I've never vaped just a staple without frames yet. I think if I do decide to make one now it will be inspired by your staggertons with ribbon frames. Once I get the hang of regular staggertons that is (mainly para-Clapton on ribbon). Just got some .3R and a good supply of 38g to practice. Might go for an 8ply fralien to start, never been able to go past 6 ply before with my .4R due to ohm-ing out so low on dual coil. I do have a DNA250 but haven't pushed anything below .1 That is a great idea though I may practice spaced aliens with a round wire core because I do eventually want to build up to that amazing looking/vaping alien stag!

I stopped trying with a all ribbon core, the ribbon seems to always slant which makes it coil funky....
16123934_1842606422681262_3846167321219432448_n.jpg
16122464_359932877720017_1631191406078853120_n.jpg
 

Th3T

Member For 3 Years
Member For 2 Years
Member For 1 Year
Lol 8g in a 250mm+ sized Mason RDA, then how do you power it? A car battery, or AC from the wall. I'd just set it on a desk and put a hooka hose to it haha. Made another 6''- 7'' of the same fralien, but afraid to wrap it just yet. At least I'm getting practice with the .3R40gfralien.jpg
 

Carambrda

Platinum Contributor
ECF Refugee
Member For 5 Years
Lol 8g in a 250mm+ sized Mason RDA, then how do you power it? A car battery, or AC from the wall. I'd just set it on a desk and put a hooka hose to it haha. Made another 6''- 7'' of the same fralien, but afraid to wrap it just yet. At least I'm getting practice with the .3RView attachment 79459
Yosh himself wrote that It's 160mm, and that it actually works so... who knows... maybe some day we can see a glow shot of it. :)
 

KingPin!

In my defence, I was left unsupervised ^^
VU Donator
Platinum Contributor
Member For 4 Years
VU Challenge Team
Reviewer
pretty sure he meant 28g lol. I just learned a very important lesson using 40g for the 2nd or so time. Made a 10'' stick of 8 ply .3R 28g framed alien, went to wrap the first coil and applied to much pressure causing all the wraps to slide down. Gotta pull just the end when wrapping. GG rekt. View attachment 79418
I unwound it and started messing with it more to try and see what not to do lol, I didn't have this happen on the first 40g fralien I made. Oh well try again another day.

Sucks buddy nothing worse taking ages on something just when it's taking shape then you get that wtf omg omg omg noooooo I'm half way through don't do this now you bastard ...arrgggggg it's going, it's going ....yep it's fucked... then you stare as it fucked mangled frame in disbelief ....right that's its vape time before you hulk out

You'll get it ;)
 

KingPin!

In my defence, I was left unsupervised ^^
VU Donator
Platinum Contributor
Member For 4 Years
VU Challenge Team
Reviewer
I present to you the legendary "Hellfire gargoyle hoof Coil" :devil:Told you I'd use it lol ...those colours were great vapes nice as well hahahah 0.25 ohm

I'm impressed with the pharoah dripper tank!

IMG_1026.JPG


Also set up my Peerless RDA with the dragon skin coils I posted page back or two ...
IMG_1041.JPG
 

Th3T

Member For 3 Years
Member For 2 Years
Member For 1 Year
Yosh himself wrote that It's 160mm, and that it actually works so... who knows... maybe some day we can see a glow shot of it. :)
Damn that's crazy. Funny thing is I can totally see him throwing something like an 8g round wire build in there haha.

@KingPin![/USER] Nice colors!
@Yamensaleh Looks like a nice tasty vaping fused clapton
 
Last edited:

Th3T

Member For 3 Years
Member For 2 Years
Member For 1 Year
Fralien40g.jpg SSFC.jpg Got my 40g fraliens wrapped, learned you gotta pull just the ends or the wraps will slide around/off . Also rewicking my tsunami 22 and noticed the coils still had some color so took a pic. Fralien: 28g KA1 frames x 8 ply .3R KA1 core x 40g N80 wrap. My 2nd SSFC I made and first one I actually used: 28g KA1 frames x 6 ply .4R KA1 x 36g N80.
 

SignMan

Silver Contributor
Member For 4 Years
I have been so tied up lately I haven't had time to sit and tinker with that 40g kd or anything else really.... and it sucks. My weekend business has really picked up and stupid me keeps taking on more complicated jobs that eat up time lol. I've been burning coils up til their toast! Here lately in my tiny bit of free time I've been enjoying taking notes and pictures of things to review. I won a couple of giveaways and said "what the hell". I love testing shit and fiddling around with them! Anyways, sorry for the rambling. Just haven't posted here in a while :blah:

Great builds on here from everyone lately! Some real crazy shit too. Jaw dropping excellence
 

Dustyjeans

Bronze Contributor
Member For 4 Years
Finally got some time to build this morning! Did some FS 28n80, 6ply.4, 40n80 Mini Fralien 28n80, 4ply .4, 36n80 and couldnt quite get into my 1st grooves 26/36, 4ply.4, 28a1 wrapped in 40n80
bc5d66e92a2fbbd13270a22cc758c0cf.jpg

SSFC 6ply.4 28/36a1
fd9faa253b9df63d8ba2e8a60bacde27.jpg

Fralien 4ply.4, 26/40n80 in my new Sherman!
e0593c71ae492856e8284fc4cd290dc6.jpg
54b712f80ed868173da1313c0e2f5cea.jpg

Finally builds are getting faster and cleaner!

Sent from my SM-G920V using Tapatalk
 

KingPin!

In my defence, I was left unsupervised ^^
VU Donator
Platinum Contributor
Member For 4 Years
VU Challenge Team
Reviewer
Good to see started a trend for the workspace shots hehehe love see what other people use to work thier builds on ;) lovely builds by the way

@Dustyjeans what attys were they you posted above? Loving the look of that last one especially
 

Dustyjeans

Bronze Contributor
Member For 4 Years
Good to see started a trend for the workspace shots hehehe love see what other people use to work thier builds on ;) lovely builds by the way

@Dustyjeans what attys were they you posted above? Loving the look of that last one especially
Thanks I think they are coming around. I've been building for almost 3 months now and because my time at the bench is limited I thought I should get it set up. Its the sherman tank! 1st rta that i really love (havent gotten my hands on a modfather yet).
30f8cf1da5875ac0f1df1b9682e9e1b6.jpg
Have you noticed were learning about the same level? Alot of your posts have have helped me move forward. Keep on spinning!

Sent from my SM-G920V using Tapatalk
 

Dustyjeans

Bronze Contributor
Member For 4 Years
Good to see started a trend for the workspace shots hehehe love see what other people use to work thier builds on ;) lovely builds by the way

@Dustyjeans what attys were they you posted above? Loving the look of that last one especially
And the SSFC is on a Pharoah

Sent from my SM-G920V using Tapatalk
 

KingPin!

In my defence, I was left unsupervised ^^
VU Donator
Platinum Contributor
Member For 4 Years
VU Challenge Team
Reviewer
Thanks I think they are coming around. I've been building for almost 3 months now and because my time at the bench is limited I thought I should get it set up. Its the sherman tank! 1st rta that i really love (havent gotten my hands on a modfather yet).
30f8cf1da5875ac0f1df1b9682e9e1b6.jpg
Have you noticed were learning about the same level? Alot of your posts have have helped me move forward. Keep on spinning!

Sent from my SM-G920V using Tapatalk

Thanks I'll look this one up! should have recognised the pharoah got one myself ...love it ;)

Yeah have noticed that :) great to bounce off others when youre still learning the ropes and likewise got so many good tips from you and others in this thread it's great... glad machine talked me into posting my earlier work on here now feels like ages ago I couldnt even knock out a decent pair of claptons lol (was actually about 2 months back I think) but feel I've come along pretty quick haven't had any bench time last week (work etc) need to have some time again planned in soon maybe next weekend :)
 

gakudzu

Gold Contributor
Member For 3 Years
Member For 2 Years
View attachment 79804 wanted to try somethin different so i used 2 22g cores and wrapped em in 26g. came out to .21 ohms single coil. would i be better off using smaller gauges? it was hard to wrap and the core wires kept twisting.
Smaller gauges are easier to work with, up to a point. They ramp up faster, and give you more surface area. I like 26-28 for cores, and 36-38 for wrap. I haven't tried anything smaller, yet.
 

scarecrowjenkins

Silver Contributor
Member For 4 Years
Unlisted Vendor
Been out on the road with the band, finally home and slowly building again.
Here's some Quad~core Aliens in the TM24.
•4x28g//38g Atomizerwick N80•

Love the vape off these quad~cores, a tad warmer than traditional aliens, along with a touch better flavor i think. Not a much different than building regular aliens, i used 24g for my de~core.
For those curious about my construction techniques, using a candle to warm it up, i hold the cores flat and put a dab of hot glue on each end. I put enough so i can crank down the drill chuck without moving the cores, and i leave about an inch of cores sticking out on the far end (behind the glue) to fix them to my Spin LT.
800ea3fe06f5e16afb0cc5ab8b5d9bf3.jpg

7f5ea160ff8964d0751a24105423f1e6.jpg

65d93cfba815a9c440a854f8c67b2e8b.jpg

8e2728c34ac1cfc30289483a80cb753a.jpg

33d0bafef3dd94bd8677ddb749e91cd5.jpg

6fb3de540d59e8a270ca29c6c67ca71d.jpg



Sent from my iPhone using Tapatalk
 

Dustyjeans

Bronze Contributor
Member For 4 Years
Been out on the road with the band, finally home and slowly building again.
Here's some Quad~core Aliens in the TM24.
•4x28g//38g Atomizerwick N80•

Love the vape off these quad~cores, a tad warmer than traditional aliens, along with a touch better flavor i think. Not a much different than building regular aliens, i used 24g for my de~core.
For those curious about my construction techniques, using a candle to warm it up, i hold the cores flat and put a dab of hot glue on each end. I put enough so i can crank down the drill chuck without moving the cores, and i leave about an inch of cores sticking out on the far end (behind the glue) to fix them to my Spin LT.
800ea3fe06f5e16afb0cc5ab8b5d9bf3.jpg

7f5ea160ff8964d0751a24105423f1e6.jpg

65d93cfba815a9c440a854f8c67b2e8b.jpg

8e2728c34ac1cfc30289483a80cb753a.jpg

33d0bafef3dd94bd8677ddb749e91cd5.jpg

6fb3de540d59e8a270ca29c6c67ca71d.jpg



Sent from my iPhone using Tapatalk
Beautiful

Sent from my SM-G920V using Tapatalk
 

Dustyjeans

Bronze Contributor
Member For 4 Years
Been out on the road with the band, finally home and slowly building again.
Here's some Quad~core Aliens in the TM24.
•4x28g//38g Atomizerwick N80•

Love the vape off these quad~cores, a tad warmer than traditional aliens, along with a touch better flavor i think. Not a much different than building regular aliens, i used 24g for my de~core.
For those curious about my construction techniques, using a candle to warm it up, i hold the cores flat and put a dab of hot glue on each end. I put enough so i can crank down the drill chuck without moving the cores, and i leave about an inch of cores sticking out on the far end (behind the glue) to fix them to my Spin LT.
800ea3fe06f5e16afb0cc5ab8b5d9bf3.jpg

7f5ea160ff8964d0751a24105423f1e6.jpg

65d93cfba815a9c440a854f8c67b2e8b.jpg

8e2728c34ac1cfc30289483a80cb753a.jpg

33d0bafef3dd94bd8677ddb749e91cd5.jpg

6fb3de540d59e8a270ca29c6c67ca71d.jpg



Sent from my iPhone using Tapatalk
Did you build enough to last you the road trip?! It looked like you were set for 2-3 months!

Sent from my SM-G920V using Tapatalk
 

scarecrowjenkins

Silver Contributor
Member For 4 Years
Unlisted Vendor
Did you build enough to last you the road trip?! It looked like you were set for 2-3 months!

Sent from my SM-G920V using Tapatalk

That was my gear for 10 days haha. I brought more than i'd need because i knew that rewicking on the road is annoying, so i just rotated em every couple days :)


Sent from my iPhone using Tapatalk
 

raymo2u

VU Donator
Platinum Contributor
Member For 4 Years
Unlisted Vendor
MTerk sent me his RDA to try out, I thought it was fitting to put some Quad Interlocking Alien Framed Staples in it..

17883173_438281196524094_8158824079978135552_n.jpg
17882692_771908346292173_3510887953456955392_n.jpg
17881828_1897127037230891_1632141895226359808_n.jpg
17881261_438570286505808_7899775708795240448_n.jpg
17495258_213415952490690_6306506325614395392_n.jpg
17881510_233827793687947_2121559882531340288_n.jpg


I gave it a Polish and now Terk wants the same thing...so I guess another 6 hours of hand polishing will be done this weekend.

18011527_615292645333944_3987692712735277056_n.jpg
18011672_282806918837905_7993418391123656704_n.jpg



Some Staggs in the G24 Seminole:

17882266_415119712186768_5723979713689419776_n.jpg
17932274_206696519825536_4777197831628783616_n.jpg
17932073_1842818739313359_9205599625392685056_n.jpg
17883177_1063659510444138_1514865343602884608_n.jpg
17882295_415682492140056_8925923286496313344_n.jpg
17881743_2164746960418291_762655848102100992_n.jpg
 

KingPin!

In my defence, I was left unsupervised ^^
VU Donator
Platinum Contributor
Member For 4 Years
VU Challenge Team
Reviewer
MTerk sent me his RDA to try out, I thought it was fitting to put some Quad Interlocking Alien Framed Staples in it..

17883173_438281196524094_8158824079978135552_n.jpg
17882692_771908346292173_3510887953456955392_n.jpg
17881828_1897127037230891_1632141895226359808_n.jpg
17881261_438570286505808_7899775708795240448_n.jpg
17495258_213415952490690_6306506325614395392_n.jpg
17881510_233827793687947_2121559882531340288_n.jpg


I gave it a Polish and now Terk wants the same thing...so I guess another 6 hours of hand polishing will be done this weekend.

18011527_615292645333944_3987692712735277056_n.jpg
18011672_282806918837905_7993418391123656704_n.jpg



Some Staggs in the G24 Seminole:

17882266_415119712186768_5723979713689419776_n.jpg
17932274_206696519825536_4777197831628783616_n.jpg
17932073_1842818739313359_9205599625392685056_n.jpg
17883177_1063659510444138_1514865343602884608_n.jpg
17882295_415682492140056_8925923286496313344_n.jpg
17881743_2164746960418291_762655848102100992_n.jpg
Is that a new rda Raymo or his existing one?
 

Dustyjeans

Bronze Contributor
Member For 4 Years
MTerk sent me his RDA to try out, I thought it was fitting to put some Quad Interlocking Alien Framed Staples in it..

17883173_438281196524094_8158824079978135552_n.jpg
17882692_771908346292173_3510887953456955392_n.jpg
17881828_1897127037230891_1632141895226359808_n.jpg
17881261_438570286505808_7899775708795240448_n.jpg
17495258_213415952490690_6306506325614395392_n.jpg
17881510_233827793687947_2121559882531340288_n.jpg


I gave it a Polish and now Terk wants the same thing...so I guess another 6 hours of hand polishing will be done this weekend.

18011527_615292645333944_3987692712735277056_n.jpg
18011672_282806918837905_7993418391123656704_n.jpg



Some Staggs in the G24 Seminole:

17882266_415119712186768_5723979713689419776_n.jpg
17932274_206696519825536_4777197831628783616_n.jpg
17932073_1842818739313359_9205599625392685056_n.jpg
17883177_1063659510444138_1514865343602884608_n.jpg
17882295_415682492140056_8925923286496313344_n.jpg
17881743_2164746960418291_762655848102100992_n.jpg
Wow once again im blown away!

Sent from my SM-G920V using Tapatalk
 

Dustyjeans

Bronze Contributor
Member For 4 Years
Love the quads especially. Its really interesting seeing the ribbon coloring underneath!

Sent from my SM-G920V using Tapatalk
 

raymo2u

VU Donator
Platinum Contributor
Member For 4 Years
Unlisted Vendor
Is that a new rda Raymo or his existing one?
Its the Mterk RDA Mterk sent me....he liked the polish so much hes sending me another RDA to polish for himself and I told me to send me juice to cover for it...his juice is pretty damn expensive but hes sending 5 120ml's of it....works for me
 
Last edited:

f4milytime

VU Donator
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
I have always built 3 cores. Never thought of doing 4 until I saw yours.

Sent from my XT1254 using Tapatalk
scarecrowjenkins posted some a few posts back, figured I'd try it. Cause I've never made a successful foot of 3 core Alien yet. LOL....

Sent from my SAMSUNG-SGH-I337 using Tapatalk
 

VU Sponsors

Top