I never tried that brand.
Actually, I'm still researching various VG grades. I was led to believe that food grade glycerin is the one to avoid, but still trying to gather more info on that. For straight up VG, I like to use Wizard Labs:
http://wizardlabs.us/index.php?route=product/category&path=83_70
I use this to cut my VelvetCloud 6mg Nic VG down to a 3mg. Not sure if its the nicotine content, but the Wizard labs VG is noticeably sweeter than the Velvet Cloud unflavored 6mg nic VG. It could be the dilution of the Velvet Cloud VG with distilled water, but I'm not 100% sure.
BTW, pretty amazing how cheap VG is huh? The markup for "gourmet" juice is pretty staggering once you look at it from that point of view lol
not to get off course here ,but does your stingray stand up in 18650 mode without fireing while its unlockedThis 30$ stingray X clone hits like a champ and has been my goto mod since I got it.. Mechs are not dead at all
View attachment 7665
not to get off course here ,but does your stingray stand up in 18650 mode without fireing while its unlocked
thanks ,,, hope to get mine fixed as it is a beautiful mod ,,,,,but a little dangerous as is,It's never fired on it's own.. I use it in 18650 mode most of the time (vaping at my desk right now).. and I usually never lock it.. I will say the button is a little sticky sometimes - thats the only issue I've noticed, but it doesn't bother me too much.
Eloquently and succinctly stated my fellow vaping cohort, I'd like to confer the highly sought after esteemed title of "favorite thread post of the week" carry the title proudly.The same can be said of automatics vs. manual transmissions - semi-auto handguns and rifles vs. revolvers and bolt guns (or even bow & arrow and Bowie knife) - digital music vs. phonograph recordings - microfiber and Gore-Tex vs. waxed cotton, wool and animal hide... I can go on and on.
Although we have all the former... the latter still works, and in many cases, thrives. People who live in the past... or people who appreciate and even revel in the knowledge and skill required... to obtain the best from what is most basic? Perhaps a bit of both.
Greater knowledge of a thing can often provide one with a greater appreciation of a thing... even an old thing.
Meh, I'm with you on the whole mechs are awesome side of things, but the kick is sorely outdated IMO. It just can't deliver the power I (and many other vapers) need. For instance, I would want to run my tanks in the mid 30 watt range and my drippers in the 40 watts or above territory. As far as I know, the kick and kick 2 (and any of the similar off brand versions that do the same thing) are nowhere near being able to supply that. Now, if or when they ever get up to speed and achieve those levels of performance, I'll be first in line screaming "take my moneys and shut up" lolAre Mechs a thing of the past ?
I can't see how mech tube mods are a thing of the past ... I can't think of anything out there that's sexier than a good looking tube mod.
And you can still have the convenience of variable watts / volts by just installing a Kick module in it.
I vape more on my mech tube mod (with Kick), than I do with my regulated box mod.
He does that often..he's here, and elsewhere.. Always throws down the fire.Eloquently and succinctly stated my fellow vaping cohort, I'd like to confer the highly sought after esteemed title of "favorite thread post of the week" carry the title proudly.
=]
....... but the kick is sorely outdated IMO. It just can't deliver the power I (and many other vapers) need.
For instance, I would want to run my tanks in the mid 30 watt range and my drippers in the 40 watts or above territory. As far as I know, the kick and kick 2 (and any of the similar off brand versions that do the same thing) are nowhere near being able to supply that.
This stand appeals to me greatly. Can one be obtained? Or do I need to show this pic to a local cabinet maker?
I love mechs, I'm addicted to them. I have kinda lost my desire for an authentic, though. My next big purchase device wise will most likely be a high quality, high powered box mod. I'd like one regulated device that's a true badass workhorse, my MVP doesn't even come close to cutting it at this point. I'd like to have a good 100 watts or so, just to have 100 watts.
.
I need to google that, 300w is just crazy. My builds put me around 15w, so a DNA30 would fit my needs, just figure if and when I do it, I oughta go big. But 300w... Damn.A co-worker makes Ares Extreme Modz 300W box mod, it doesn't use 18650 batteries tho. It uses a 11.1v battery.
If I were into box mods I would pick one up but for me, mechs are not a thing of the past.
I did not fancy the Mutation X....but I do love my Doge (shall be Doge(s) quite soon)I dont think so, see how beautiful this big boy is... Im just waiting for a brass MUTATION XL TO PAIR ON MY BOSS...
Sent from my
LUMIA 1520
I don't have the X I have the XL... IF IT AINT 26650 I dont buy it...I did not fancy the Mutation X....but I do love my Doge (shall be Doge(s) quite soon)
Use a 26650 mech..you won't have to carry a dozen extra batteries...naw...tons of mechs are beautiful devices...
that magnetic bottom switch was genius...
sure would like to see a mech with a side magnetic switch...
just prefer to use a regulated device so i dont have to carry a dozen batteries ...
someone comes along with a different view than i have, they're not wrong, we just dont see eye to eye...
rip into my coil management, i giggle a bit...simple modified micro coil works for me...others like what they like...
his posts kinda butt hurt me for a sec, and i pee'd a bit, but i had a vape on my shitty coil, with my shitty regulated mod at my sissy 20 watts...
i'm good
I've heard of kicks but what are they exactly? I only use the 26650 mech mods and the batts I use are already powerful enough to support my sub ohm builds all day on one charge.. Could a kick make it even better? How does it work? ThxI would go back to mechs if a 20-50w kick was made. I like a steady vape and battery cutoff at 3.3v
I thank you for your reply..but I don't think I could even put a kick in this BFM due to hybrid top cap and no extra room in the tube..in fact if batts are over 66mm in length they don't fit either being too long.. I guess I really don't need a kick anyway... LolI think and im sayin I think,,,with a kick you can adjust your watts or volts depending on the kick you have,,sometimes just a raw battery is to much power and you need to tone it down,,,,and it works the other way to so you can have a set amount of power when your battery starts to get low,it gives you more power
this is my understanding of how they work
If im wrong anyone, chime in and correct me,
I thought I was wrong once,but I was mistaken
I think and im sayin I think,,,with a kick you can adjust your watts or volts depending on the kick you have,,sometimes just a raw battery is to much power and you need to tone it down,,,,and it works the other way to so you can have a set amount of power when your battery starts to get low,it gives you more power
this is my understanding of how they work
If im wrong anyone, chime in and correct me,
I thought I was wrong once,but I was mistaken
Ok, so that works for you, but IMO most people run their kayfun's at a Lower resistance: around .8 ohms. So I think the optimal wattage at that resistance would exceed the kick's performance range. I dunno, evolv was freaking killing it for a good long while there, but with the DNA 40 and how they haven't updated the kick in a while I feel like success has stagnated their motivation and driveI hear what your saying, but for me, I like the vape I get from my Kayfun with a single 1.6 ohm coil being fed 4.0v (10 watts).
The Kick can deliver that.
And my stick still burns rubber in all 4 gears ..(454 Chevelle SS)...LolMecha is like driving a stick shift...we still use those. ;-)
And my stick still burns rubber in all 4 gears ..(454 Chevelle SS)...Lol
from Droid Maxx using Tapatalk
That is soo true..here in San Diego we have a boatload of B&M vape shops I've visited..Every single Brick and Mortar I visit every Vape bar and the derivatives 90% of the people are using a Mech
I use both.
I bought a DNA 30 when they were the hot thing, I just bought a used Vanilla, and now, it's the one doing all the work. That box is good for somethings, but I like a Mech mod as well, or better.So I see VJ posted some thoughts regarding the already late DNA 40 chipset coming out soon. I had to chuckle because that's the first thing I thought of when I heard they were releasing a 40watt chip.....too little too late. And then to add a gimmick like "temp control" made it even more of a joke.
Anyway, are mechanical mods going bye bye for good?
I still love my mechs! I like the fact that they are simple, basic devices that are subject to some computer chip to make them work. I like the fact that with my mech mods I can, and have been able too, vape at 100+ watts long before any regulated box mod came along.
I don't hate the box mods..but I do hate the idea of mechanicals becoming a thing of the past. What about you?
Everything has it's place. I really enjoy my box... At home. On the road, I think I prefer a Copper, or Brass Mech Serously looking at the copper and brass Slug mod.. Like the pair of them for Christmas!Sold all of my regulated devices. I admit, on paper, the specs will definitely show that a provari or DNA vapes better than something unregulated, but personally, I don't find it to be true at all.
As TheWestPole mentioned, one of my personal favorite setups is a KFL+ w/ nano kit on my 4Nine in 18350 mode.
I think form factor plays a big role too, and for me, smaller and simple is more. I did like the Vaporshark a lot, but always went for the 4Nine first.
Mechs a thing of the past? I think State O' Flux pretty much countered that notion in the best way possible