my kangertech cupti is stuck on Titanium mode and it wont hit, when i try to change the mode it doesn't do anything and i can't turn it off. + doesnt do anything and - only flips the display. The temp on the screen just increases without me pressing anything and when i press - and the fire button it blinks 3 times.
Become a Patron!
Kangertech Cupti stuck on Ti
- Thread starter Elliott20
- Start date
SirRichardRear
AKA Anthony Vapes on Youtube
VU Donator
Diamond Contributor
Member For 3 Years
Reviewer
sounds like the board went bad. did any juice leak inside it?
SirRichardRear
AKA Anthony Vapes on Youtube
VU Donator
Diamond Contributor
Member For 3 Years
Reviewer
doubtful unless you can send it in for warranty. not sure how kanger is with their warranties but 90% of companies suck with the customer service and warranty so I wouldn't expect it
Is there anything else it could be?
SirRichardRear
AKA Anthony Vapes on Youtube
VU Donator
Diamond Contributor
Member For 3 Years
Reviewer
maybe a stuck button? Is your + button stuck?
SirRichardRear
AKA Anthony Vapes on Youtube
VU Donator
Diamond Contributor
Member For 3 Years
Reviewer
maybe it's the plus button stuck. fire wont' work cause there is probably a shortcut when pressing the fire and + at the same time. and it keeps moving up because + is stuck. SO I'm thinking either your + button is stuck (try to wiggle it) and if not then the board is likely shot
SirRichardRear
AKA Anthony Vapes on Youtube
VU Donator
Diamond Contributor
Member For 3 Years
Reviewer
no problem!
I have this same issue, I was afraid that some juice had spilled on the +/- buttons so we got the top off (NOT an easy project) and there was a little gunk but not much. We put it all back together, put the battery in, and same issue, stuck on 7W and IF I can get it to go up any then it goes right back down. I can't find my warranty info (natch!) but it probably wouldn't matter, anyway, since we somewhat disassembled it. At least I have a back-up vape so I'm not deviceless. I am, however, glad to know that I'm not the only one to have had this issue.
