Become a Patron!

Help building an unregulated 18650 in series mod (8.4 volts)

d00hickey

d00hickey

Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
Another mod I'm considering building is a bottom feeder. I would like to use a 1590g box with a single 18650 and sled, and use the other half of the box to put in a bottle and a Fatdaay 510 bottom feeder edition. I'm considering using a switch from another mech mod to bypas the mosfet , but I'm not opposed to using a mosfet. Are ther anyone plans/shematics floating around for my build from.

Thanks again my helpful vaper friends.
 
Wabah58

Wabah58

Silver Contributor
Member For 4 Years
d00hickey said:
Another mod I'm considering building is a bottom feeder. I would like to use a 1590g box with a single 18650 and sled, and use the other half of the box to put in a bottle and a Fatdaay 510 bottom feeder edition. I'm considering using a switch from another mech mod to bypas the mosfet , but I'm not opposed to using a mosfet. Are ther anyone plans/shematics floating around for my build from.

Thanks again my helpful vaper friends.
Click to expand...
Thinkin about doing a Squonk box myself :). with mosfet. Angelcigs has the 1.1 Zinith V2.5 now, and it includes the 510 bottom feed pin, and post.
 
MrFixIt

MrFixIt

Member For 4 Years
Yep yep that's on my to do list as well. I'm currently getting ready to start making a okr style box mod for my buddy. It's going to be the bare minimum but the project box has enough room to update as he gets more proficient in the ways of the vape force.
 
MrFixIt

MrFixIt

Member For 4 Years
I started looking at just hammond enclosures and wow there are a ton of them this one I found looked interesting it might not be a travel around with you unit but I wonder what one could make with it.
 

Attachments

  • uploadfromtaptalk1415425445606.jpg
    uploadfromtaptalk1415425445606.jpg
    44.3 KB · Views: 18
Wabah58

Wabah58

Silver Contributor
Member For 4 Years
MrFixIt said:
I started looking at just hammond enclosures and wow there are a ton of them this one I found looked interesting it might not be a travel around with you unit but I wonder what one could make with it.
Click to expand...
Might be a good fun build for a dual 510 mod.
 
MrFixIt

MrFixIt

Member For 4 Years
That's what I was thinking,or you could make it the ultimate bottom feeder by setting up multiple bottles inside with a control valve system that let's you turn on or off the different flavors.
 
d00hickey

d00hickey

Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
Wabah58 said:
Thinkin about doing a Squonk box myself :). with mosfet. Angelcigs has the 1.1 Zinith V2.5 now, and it includes the 510 bottom feed pin, and post.
Click to expand...

I'm searching for that bottom fed zenneth on anglecigs and I cant find it. do you have a link? Also if anyone has a thread of other atomizes converted to bottom fed would be great too.

Never mind I found it. Now I want to see if I can find some other bottom feed atomizers
 
S

seaweed88

Warhawk-AVG said:
ok...modified the board

i.png
i.png


OK...it is pretty much the exact same setup as above, only 3 wires need to be soldered, the battery - and Switch wire on bottom, the 510 ground wire on top.

The VIA's have been enlarged to 1.7mm to be able to fit 14ga wire in them, the SW1 VIA is 24ga...the board is just slightly larger than the width of the TO220 chip and just a tiny bit longer, but now with a single piece of 18650 wrapping shrinkwrap you can cover the entire setup (not multiple strips of heatshrink tubing)

2 layer board of 0.62x1.19 inches (16x30mm). $3.70 for three.
Click to expand...
Are any of these boards available? If so let me know how to contact you
 
CMVapes

CMVapes

Sorry if I'm necro posting, this was really the only post I could find with good infor. If the MOSFET was burned up while soldering, could it cause the mod to auto fire? Similarly, can a resistor be burned up causing it to auto fire? Thanks in advance.
 
You must log in or register to reply here.

VU Sponsors

Top