Become a Patron!

Squonkers are Bonkers

SirRichardRear

AKA Anthony Vapes on Youtube
VU Donator
Diamond Contributor
Member For 3 Years
Reviewer
it's a full on sqounk day for me
F1GXg6fymBiyuOtbSENXQIk4B2IUrDNr29zkJzg--Z4.jpg
 

SirRichardRear

AKA Anthony Vapes on Youtube
VU Donator
Diamond Contributor
Member For 3 Years
Reviewer
What is the one on the right?
Looks like a Dripbox 160 styled mod, down to the venting locations and top screws.
The geekvape Gbox S100. actually uses the same bottles as the drip box. It has a metal pick up tube though which is really nice
 

The Cromwell

I am a BOT
VU Donator
Diamond Contributor
Member For 4 Years
The geekvape Gbox S100. actually uses the same bottles as the drip box. It has a metal pick up tube though which is really nice
So does the Dripbox 160. the tube is nice.

It is basically a Dripbox 160 ripoff? Even the control panel is the same layout.
Case is nicer, more rounded though.

Are we sure that mod is not made for them by Kanger?
 

The Cromwell

I am a BOT
VU Donator
Diamond Contributor
Member For 4 Years
Just watched Deans review of the S100.
It is basically a Dripbox 160 with a bigger case for bigger attys and a different bottom door.
The bottle Tube IS Kanger and so are the bottles.
The case even fastens together almost identically.
I do not like that the batteries fall out whenever you fill your bottle.
The little magnetic bottle door on the Kanger is a bit dinky but better imho.

I expect that the mod is made by Kanger for Geekvape.
The chip is not one I recognize though. Larger display and can adjust watts in TC mode.

I am surprised that none of the 'experts' out there have caught this.
 
Last edited:

SirRichardRear

AKA Anthony Vapes on Youtube
VU Donator
Diamond Contributor
Member For 3 Years
Reviewer
Just watched Deans review of the S100.
It is basically a Dripbox 160 with a bigger case for bigger attys and a different bottom door.
The bottle Tube IS Kanger and so are the bottles.
The case even fastens together almost identically.
I do not like that the batteries fall out whenever you fill your bottle.
The little magnetic bottle door on the Kanger is a bit dinky but better imho.

I expect that the mod is made by Kanger for Geekvape.
The chip is not one I recognize though. Larger display and can adjust watts in TC mode.

I am surprised that none of the 'experts' out there have caught this.
LMAO most things tend to slip by
 

The Cromwell

I am a BOT
VU Donator
Diamond Contributor
Member For 4 Years
It should at least get Kanger styled squonk bottle and fill tube comments from reviewers like they do with Velocity Styled, Goon Styled, etc :)

Maybe that only works if china copies not if other ....
 

SirRichardRear

AKA Anthony Vapes on Youtube
VU Donator
Diamond Contributor
Member For 3 Years
Reviewer
It should at least get Kanger styled squonk bottle and fill tube comments from reviewers like they do with Velocity Styled, Goon Styled, etc :)

Maybe that only works if china copies not if other ....
LMAO I don't think many people (myself included) ever had a drip box to compare lol
 

R3alJim Shady

Platinum Contributor
Member For 4 Years
Funny, I haven't even been able to set up my Orca just yet and now I'm thinking about all kinds of squonkers with Star Wars insignias and designs... anyone know anyone who would make such a thing?


Sent from my iPhone using Tapatalk Pro
 

~Don~

Platinum Contributor
Member For 5 Years
Funny, I haven't even been able to set up my Orca just yet and now I'm thinking about all kinds of squonkers with Star Wars insignias and designs... anyone know anyone who would make such a thing?


Sent from my iPhone using Tapatalk Pro

Like this?

upload_2017-6-23_17-18-8.png



Its a PhantoHm
 

~Don~

Platinum Contributor
Member For 5 Years
that is beyond what I was thinking. Body needs to be black with a white door!!!!

I was thinking like a black one with the Empire crest, a Rebel one in orange, white, and black. A Boba Fett one with maroon and dark green with the Bounty Hunters' crest..


Sent from my iPhone using Tapatalk Pro
upload_2017-6-23_17-24-12.png


Their pricing is as such...

PhantoHm BF RRP

## Paypal paid as F&F ##
- Phantohm Acetate panel 178€ + shipping
France 186€
EU 196€
Rest of the world 200€

- Phantohm Wood panel 202€ + shipping
France 210€
EU 220€
Rest of the world 224€

## Paypal paid as Goods ##
- Phantohm Acetate panel 178€ + shipping
France 195€
EU 205€
Monde 209€

- Phantohm Wood panel 202€ + shipping
France 220€
EU 230€
Monde 234€

Size: 73,5x24,5x42 mm
 
Last edited:

R3alJim Shady

Platinum Contributor
Member For 4 Years
View attachment 85077


Their pricing is as such...

PhantoHm BF RRP

## Paypal paid as F&F ##
- Phantohm Acetate panel 178€ + shipping
France 186€
EU 196€
Rest of the world 200€

- Phantohm Wood panel 202€ + shipping
France 210€
EU 220€
Rest of the world 224€

## Paypal paid as Goods ##
- Phantohm Acetate panel 178€ + shipping
France 195€
EU 205€
Monde 209€

- Phantohm Wood panel 202€ + shipping
France 220€
EU 230€
Monde 234€

Size: 73,5x24,5x42 mm

Goddamit. My already obsessive mind didn't need that to focus on.

Good thing my wallet makes the rules!


Sent from my iPhone using Tapatalk Pro
 

BrewBear

Platinum Contributor
Member For 4 Years
Never thought it'd be so hard to sell the octo! I should just drop the price to $210 and see if it goes.


Sent from my iPhone using Tapatalk
Good luck with that one! People are into disposable mods nowadays.....not the ones here, I guess. Overall. The Chinese clones invasion will erode whatever value there was in 3D printed and unless it is something that sets it apart, you're pretty much better off keeping it.
 

f1r3b1rd

https://cookingwithlegs.com/
Staff member
Senior Moderator
VU Donator
Diamond Contributor
VU Challenge Team
Member For 5 Years
VU Patreon
Never thought it'd be so hard to sell the octo! I should just drop the price to $210 and see if it goes.


Sent from my iPhone using Tapatalk
Did you try the ecf?
I sold my higher end stuff there.
Or maybe vapetrader?

BAM crew
 

JuicyLucy

My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Just watched Deans review of the S100.
It is basically a Dripbox 160 with a bigger case for bigger attys and a different bottom door.
The bottle Tube IS Kanger and so are the bottles.
The case even fastens together almost identically.
I do not like that the batteries fall out whenever you fill your bottle.
The little magnetic bottle door on the Kanger is a bit dinky but better imho.

I expect that the mod is made by Kanger for Geekvape.
The chip is not one I recognize though. Larger display and can adjust watts in TC mode.

I am surprised that none of the 'experts' out there have caught this.

The 510 is adjustable on the Geekvape squonker
 

JuicyLucy

My name is Lucy and I am a squonkaholic
VU Donator
Diamond Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Never thought it'd be so hard to sell the octo! I should just drop the price to $210 and see if it goes.


Sent from my iPhone using Tapatalk

All right Squonkaroos - back from vaycay and may just have to take this off of that Honda guy

Hey, what happened to the Odis 16 on it?

Frickin' love those little tiny atties...
 

Sonar505

Silver Contributor
Member For 4 Years
Member For 3 Years
Modder
@KadlyDoWrong No offense here. Think he would have liked that.
On a side note: Right before he passed we had been making arraignments for him to ship it to me. So that I could repair the door Which he somehow managed to warp. And Replace the homemade battery holder with a sled. So I would like to extend the same offer to you. If you are willing. No charge for repairs just shipping. So if you agree just contact me for address. You can also send the your other one which I believe you mentioned had accidentally been left in a puddle of water?:crazy: And I will see if that can be restored. Sound Good?
 

SirKadly

Squonk 'em if you got 'em
VU Donator
Platinum Contributor
Member For 5 Years
@KadlyDoWrong No offense here. Think he would have liked that.
On a side note: Right before he passed we had been making arraignments for him to ship it to me. So that I could repair the door Which he somehow managed to warp. And Replace the homemade battery holder with a sled. So I would like to extend the same offer to you. If you are willing. No charge for repairs just shipping. So if you agree just contact me for address. You can also send the your other one which I believe you mentioned had accidentally been left in a puddle of water?:crazy: And I will see if that can be restored. Sound Good?
I appreciate the offer, you are quite generous, and I will be in touch to make some arrangements though I think I'm going to play a bit with it first.
 

SteelDriver

Gold Contributor
Member For 4 Years
I just ordered from them as well. Keep in mind they take 1-5 days to process payment. My order status didn't move for 3 days so I emailed them and that's the response I got.


Sent from my iPhone using Tapatalk Pro
I just got order confirmation.

Sent from my SAMSUNG-SM-N910A using Tapatalk
 

TrollDragon

Silver Contributor
Member For 4 Years
ECF Refugee
This is up for sale on a local group, looks dangerous or is there a mosfet buried somewhere? Anyone know what it is, 510 has a lip around it.Unknown Squonk.jpg
 

Sonar505

Silver Contributor
Member For 4 Years
Member For 3 Years
Modder
This is up for sale on a local group, looks dangerous or is there a mosfet buried somewhere? Anyone know what it is, 510 has a lip around it.View attachment 85105

Not sure what brand it is. But If you could pry out the plate where the bottle goes I think you will find a mosfet under the small shelf on the bottom.
As for the 510 it could be one of the fancy ones with a removable and changeable plates or something as simple as a FatDaddy V4 ultimate which has a lip like that for 22mm atties to slide in no way to tell from image.
 

TrollDragon

Silver Contributor
Member For 4 Years
ECF Refugee
Not sure what brand it is. But If you could pry out the plate where the bottle goes I think you will find a mosfet under the small shelf on the bottom.
As for the 510 it could be one of the fancy ones with a removable and changeable plates or something as simple as a FatDaddy V4 ultimate which has a lip like that for 22mm atties to slide in no way to tell from image.
Much Thanks!
The seller doesn't know the name of it, here is the other picture he posted of the 510 and fire button.
510.jpg
 

VU Sponsors

Top