Become a Patron!

The official VAPE MAIL!!!!!!! thread

Status
Not open for further replies.

Puff

Gold Contributor
Member For 4 Years
My Matchy Matchy set up came From Vapor DNA . Rocking the Uwell 3 and a Blue Ammit 25 for those Rebuilding coils kinda day.
a16d7824e9f4902e37ac7201bdd7f6d3.jpg
c76e96034376c2b9845748085b672253.jpg
adb101977d82005cb999fa2a74df7b9f.jpg


Sent from my SAMSUNG-SM-G935A using Tapatalk
 

mjag

Gold Contributor
Member For 4 Years
Got the bubble tank from the BFT Plus accessory kit to put on my Sherman. Damn thing holds more than 9ml now and no more wicking problems!

Also pick up the new SuperTank Nano. Just a ego sized version that still uses the same supertank coils and drip tips, already put on a blue resin and Atom vapes coil.

Some 0.80ohm Uwell D2 coils and the RTC for the Arctic V12.

All of the above purshased from vaporworld.biz



Got in the Cthulhu Azathoth RDA in for review today as well.....building time!

0de8b32b329e53b7d69c89f9732e28af.jpg


Sent from my SM-N910P using Tapatalk
 

CashNVape

Gold Contributor
Member For 4 Years
muhahahhaa! I'm pretty sure this is legit! got it for 99cents! on ebay. plus shipping. but this thing has to be authentic! atleast it has all the parts like the authentic. the one on the right is the one I just got, and the one on the left is an old one I got for $50 that is a piece of shit. look at the one on the right with the stainless pin on the copper magazine! the clone one does not have that and doesn't sit tight enough for firing. I'm soo happy to have gotten this mod for 99 cents!
also the firing button is a screw under it the clone does not. I need to see who I can contact and find out if their is a serial # somewhere.
e904776b8f0324058c905f4f6e5f0da6.jpg
18b3ec98995e5ae85d8efed4845aa59a.jpg
ad4929ea4677660cea9d3c71cd4d0d59.jpg


Sent from my SM-G900V using Tapatalk
 

fraleywp

Silver Contributor
Member For 4 Years
muhahahhaa! I'm pretty sure this is legit! got it for 99cents! on ebay. plus shipping. but this thing has to be authentic! atleast it has all the parts like the authentic. the one on the right is the one I just got, and the one on the left is an old one I got for $50 that is a piece of shit. look at the one on the right with the stainless pin on the copper magazine! the clone one does not have that and doesn't sit tight enough for firing. I'm soo happy to have gotten this mod for 99 cents!
also the firing button is a screw under it the clone does not. I need to see who I can contact and find out if their is a serial # somewhere.
e904776b8f0324058c905f4f6e5f0da6.jpg
18b3ec98995e5ae85d8efed4845aa59a.jpg
ad4929ea4677660cea9d3c71cd4d0d59.jpg


Sent from my SM-G900V using Tapatalk
There are a bunch of different clone versions of this mod. I have one I paid $40 for and it is built 1:1 and is very high quality. I am not sure how you can tell which ones are better than the others though.

My magazine is perfectly smooth and all the buttons and the release pin are perfect. The fire button looks nearly identical to the one the right as well. In your pics, the fire button on the left looks messed up and sits way too high.

I think it's hit or miss with these clones. I got lucky that I found mine in a shop and I was able to handle it before buying.
 

mjag

Gold Contributor
Member For 4 Years
Couple of new RTAs I got in the mail today. Modfather Voltrove and Mason Dumptank
9c343450eaba1b23391ab8a4575190a8.jpg
Good luck with the dumptank, hopefully they fixed it so it doesn't dump all it's juice. I suggest filling it tonight but keep it in a glass container overnight to see if it holds the juice. I am pretty sure it is the top cap that looses it seal over time, that is why mine worked great for a couple of days then DUMP.......arghhhhh

Sent from my SM-N910P using Tapatalk
 

ieatOhms

Silver Contributor
Member For 4 Years
ECF Refugee
Good luck with the dumptank, hopefully they fixed it so it doesn't dump all it's juice. I suggest filling it tonight but keep it in a glass container overnight to see if it holds the juice. I am pretty sure it is the top cap that looses it seal over time, that is why mine worked great for a couple of days then DUMP.......arghhhhh

Sent from my SM-N910P using Tapatalk

Lol! Yeah, I've heard about the all the trouble with them. So far it's been good, but time will tell.
 

renzyb

Silver Contributor
Member For 4 Years
muhahahhaa! I'm pretty sure this is legit! got it for 99cents! on ebay. plus shipping. but this thing has to be authentic! atleast it has all the parts like the authentic. the one on the right is the one I just got, and the one on the left is an old one I got for $50 that is a piece of shit. look at the one on the right with the stainless pin on the copper magazine! the clone one does not have that and doesn't sit tight enough for firing. I'm soo happy to have gotten this mod for 99 cents!
also the firing button is a screw under it the clone does not. I need to see who I can contact and find out if their is a serial # somewhere.
e904776b8f0324058c905f4f6e5f0da6.jpg
18b3ec98995e5ae85d8efed4845aa59a.jpg
ad4929ea4677660cea9d3c71cd4d0d59.jpg


Sent from my SM-G900V using Tapatalk

Sick!!! Nice grab!!


Sent from my iPhone using Tapatalk
 

Johnny VapeStand

Bronze Contributor
Member For 4 Years
Lol! Yeah, I've heard about the all the trouble with them. So far it's been good, but time will tell.
I've found that it needs the juice ports to be pretty heavily stuffed with cotton. Once wicked, I added another small amount of cotton directly into the outer portion of each of the juice ports, and have had no leaking problem.
 

ieatOhms

Silver Contributor
Member For 4 Years
ECF Refugee
I've found that it needs the juice ports to be pretty heavily stuffed with cotton. Once wicked, I added another small amount of cotton directly into the outer portion of each of the juice ports, and have had no leaking problem.

I haven't had any issues with the Dumptank. In the bag of extra their are disks you can add underneath the silicone fill port to create a better seal. Once you add an extra disk it seals it up pretty good....if that makes any sense. Lol
 

Nevweezy

VU Donator
Silver Contributor
Member For 3 Years
Member For 2 Years
I haven't had any issues with the Dumptank. In the bag of extra their are disks you can add underneath the silicone fill port to create a better seal. Once you add an extra disk it seals it up pretty good....if that makes any sense. Lol
Glad you got it working nicely. They come with extra gaskets too..
 

SirRichardRear

AKA Anthony Vapes on Youtube
VU Donator
Diamond Contributor
Member For 3 Years
Reviewer
muhahahhaa! I'm pretty sure this is legit! got it for 99cents! on ebay. plus shipping. but this thing has to be authentic! atleast it has all the parts like the authentic. the one on the right is the one I just got, and the one on the left is an old one I got for $50 that is a piece of shit. look at the one on the right with the stainless pin on the copper magazine! the clone one does not have that and doesn't sit tight enough for firing. I'm soo happy to have gotten this mod for 99 cents!
also the firing button is a screw under it the clone does not. I need to see who I can contact and find out if their is a serial # somewhere.
e904776b8f0324058c905f4f6e5f0da6.jpg
18b3ec98995e5ae85d8efed4845aa59a.jpg
ad4929ea4677660cea9d3c71cd4d0d59.jpg


Sent from my SM-G900V using Tapatalk
If it's authentic the serial number will be stamped in the battery trey on the top
 

Angrygod50

Gold Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
32- 60ml bottles/droppers
2 x 60ml Charlie Nobel Pistachio RY4 the only stuff I still buy.
Voopoo Drag love the name, love using it, built like a tank but don't love holding it....ergonomically challenged.
Waiting for a Smoant Battlestar, should be here tomorrow.
 

Puff

Gold Contributor
Member For 4 Years
Look what showed up my SX Mini in Kevlar Red the Blue tank is temporary , my other tanks for this mod will be here tomorrow. Again thanks to Coval Vapes for another Flawless purchase.
83df8d6afbe621fe890b4160f15da751.jpg


Sent from my LG-V930 using Tapatalk
 

KingPin!

In my defence, I was left unsupervised ^^
VU Donator
Platinum Contributor
Member For 4 Years
VU Challenge Team
Reviewer
Look what showed up my SX Mini in Kevlar Red the Blue tank is temporary , my other tanks for this mod will be here tomorrow. Again thanks to Coval Vapes for another Flawless purchase.
83df8d6afbe621fe890b4160f15da751.jpg


Sent from my LG-V930 using Tapatalk

Digging the red Kevlar hmmmmm
 

Nailz

FUCK the FDA
VU Donator
Gold Contributor
Member For 5 Years
More juice from that1vape, love these guys, told them to save some pennies and not send me the small empty bottles for the 120 mils bottles, like they normally send, so instead they sent me a coiling jig for free :)

ee7lq5s.jpg


Also got the HCigar VT75 color from ecig-city, couldn't say no for $72, as everywhere else I've seen stateside is over $100, got plenty of DNA75's, but 1st color one to play with :)

vHN7O7x.jpg
 

KingPin!

In my defence, I was left unsupervised ^^
VU Donator
Platinum Contributor
Member For 4 Years
VU Challenge Team
Reviewer
Vaptio Turbo RDTA-L
Vaptio P-III Gear Starter Kit
Vaptio Frogman

View attachment 86164

Hope you like that lot para got that exact same gear coming myself hopefully next week got talking to vaptio in uk they said would I be interested in reviewing some of thier line up

I said do bears shit in the woods!....
After the puzzled look I followed up with erm are you sure you want me to review it cause I won't go easy if I'm not happy with it ..they said yep we stand by em

That's ballsy I like that ....Ok sign me up baby challenge accepted!
 
Status
Not open for further replies.

VU Sponsors

Top