Become a Patron!

Dual Claptons for Big Baby Beast question.

arrowcrest

Member For 4 Years
I've been building regular coils for about a year but that was for temp control and I'm going back to watts mode.
My question is I want to build dual claptons using Kanthal for center wire and outer wrap. I need suggestions for inner and outer wire sizes for the Big Baby Beast. I want to build 3mm id and have a warm vape. I am using a IPV 4S mod but don't know what finished ohm reading I should go for? I also have other RBA tanks, U Well Crown and Vapers Cloud VCMT and wondered where to start with them? Of course the U Well is a single coil and that one would need to be 2.5 mm ID.
Thank You
Any help would be great!
 

gakudzu

Gold Contributor
Member For 3 Years
Member For 2 Years
I've stuffed a pair of 4-wrap 3×28/38 SS316L in that rba. I TC mine, but they work fine in wattage mode, too.
 

Jriley

Bronze Contributor
Member For 3 Years
He said a triple core fused clapton, 3 pieces of 28G SS316L for core wires and 38G SS316L for wrap. If you use temp control then a good build for that rba using SS is 24G SS316L 36G SS316L or higher for wrap/clapton and i think i did 7 wraps with that setup on a 22mm dripper. Was a very nice vape too wish i had some more 24g SS lol
 

gakudzu

Gold Contributor
Member For 3 Years
Member For 2 Years
I do temp control also. Could you explain that build please, I'm not up on all the abrevations?
Yep, what Jriley said. It was almost too much coil for such a small rba, but I was curious. It performed great, but guzzled juice like mad lol. I've since backed it down to 2 28g cores wrapped with 38g 316L stainless. Still great flavor, but runs at lower wattage so it's not quite as thirsty.
 

arrowcrest

Member For 4 Years
He said a triple core fused clapton, 3 pieces of 28G SS316L for core wires and 38G SS316L for wrap. If you use temp control then a good build for that rba using SS is 24G SS316L 36G SS316L or higher for wrap/clapton and i think i did 7 wraps with that setup on a 22mm dripper. Was a very nice vape too wish i had some more 24g SS lol
Thank you for answer.
 

arrowcrest

Member For 4 Years
Yep, what Jriley said. It was almost too much coil for such a small rba, but I was curious. It performed great, but guzzled juice like mad lol. I've since backed it down to 2 28g cores wrapped with 38g 316L stainless. Still great flavor, but runs at lower wattage so it's not quite as thirsty.
Thank you for answer and update on coil.
 

VU Sponsors

Top