Become a Patron!

Post your builds

KarmicRage

Silver Contributor
Member For 2 Years
Member For 1 Year
Woah dude, what wick is that? They aren't the activated carbon ones are they? Pretty sure they've been banned for health concerns haven't they?

Sent from my MI MAX 2 using Tapatalk
 

CrazyChef v2.0

Gold Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Reddit Exile
VU Patreon
8 ply 0.3x0.1/40 SS316L staples on the Kennedy. I really like this classic RDA - no bells or whistles, just great flavor and respectable clouds if you want them.

ao0RANG.jpg
 

TooCruel

Member For 2 Years
Member For 1 Year
Playing with new profile of micro sliders(6 x 33AWG). Before(left) and after chemical smoothing(right).
219516571_qrawpep.jpg

Spec:
Name: Spatial/spacious multi-core micro alien,
Angular coefficient(initial clapton): x2,4-2.5,
Final resistance: 0,267Ohm(dual coil) / 0,54Ohm(single),
Wires: 6 x 0,18mm + 0,07mm, Kanthal D,
I hate this kind of ultra macro...
Tryptyk-a_qrawpxq.jpg

PS
And I'm still struggling with 5-6x 35AWG(but without success :( )
 

champton

Bronze Contributor
Member For 4 Years
Woah dude, what wick is that? They aren't the activated carbon ones are they? Pretty sure they've been banned for health concerns haven't they?

Sent from my MI MAX 2 using Tapatalk

It's normal cotton bacon. My juice just turns it dark purple. I got into making custom juices. This one's peanut butter/grape.
 

KarmicRage

Silver Contributor
Member For 2 Years
Member For 1 Year
Oh yeah, nevermore then lol. I'm into the diy myself (obviously) and had come across that info and it looked like the same stuff to me

Sent from my MI MAX 2 using Tapatalk
 

KarmicRage

Silver Contributor
Member For 2 Years
Member For 1 Year
I'm finding the SSFC a bitch in the finer gauge wires myself, practice and patience la and you'll nail it. What you've got done looks tidy as

Sent from my MI MAX 2 using Tapatalk
 

mikekscholz

Member For 4 Years
It curved and collapsed as soon as I tried to coil it tho ... I'd probably have better luck if I tried it with .3 and 30g cus my .3 staples are coiling beautiful, but I didn't wanna work that small for my first try.
 

MrMeowgi

The Vapin' Drummer
VU Donator
Diamond Contributor
Member For 4 Years
Wow holy frustrating... 6 ply .4k framed with 28g Ka1 staggered and fused with 36g N80.... I had to stop and flatten it about every 10-15 wraps and my core failed on me after I got about 5" done.

View attachment 95526
I watched a video on those coils this morning. Seems like a lot of work until you get the hang of it.

Sent from my Nexus 6P using Tapatalk
 

KarmicRage

Silver Contributor
Member For 2 Years
Member For 1 Year
14 ply .3x.1 28g frames all kanthal/FeCrAl /38g ss316l. Only have Kanthal ribbon in .3 so the ramp up times a bitch. Still one of the wider coils I've done cleanly though. Roll on up the gauges
c8f64f871605237dc0291985377090f5.jpg


Sent from my MI MAX 2 using Tapatalk
 

MrMeowgi

The Vapin' Drummer
VU Donator
Diamond Contributor
Member For 4 Years
14 ply .3x.1 28g frames all kanthal/FeCrAl /38g ss316l. Only have Kanthal ribbon in .3 so the ramp up times a bitch. Still one of the wider coils I've done cleanly though. Roll on up the gauges
c8f64f871605237dc0291985377090f5.jpg


Sent from my MI MAX 2 using Tapatalk
Pulse?


Sent from my Nexus 6P using Tapatalk
Edit: ahh I see a 24 nevermind.
 

KarmicRage

Silver Contributor
Member For 2 Years
Member For 1 Year
Mahoosive coil. Only a simple staggered fused Clapton wrapped around a 5mm bit in the vandy vape pyro. Damn this thing chucks

Edit. Forgot the specs. 28g Kanthal/36g (.14) ss316l

Sent from my MI MAX 2 using Tapatalk
b61dd40d5d91b084719d277275ecef3d.jpg
 

mikekscholz

Member For 4 Years
14 ply .3x.1 28g frames all kanthal/FeCrAl /38g ss316l. Only have Kanthal ribbon in .3 so the ramp up times a bitch. Still one of the wider coils I've done cleanly though. Roll on up the gauges

Sent from my MI MAX 2 using Tapatalk

the .3 kanthal i used in my unframed staples ramp up too fast... I actually wish it was a wee bit slower lol.
 

KarmicRage

Silver Contributor
Member For 2 Years
Member For 1 Year
See I quite liked the staged 10 ply staple I did a while back as well but I'm making efforts to do wider coils. Next thing on the shopping list is .2 ribbon wire though to see how fast the same build ramps up in the thinner gauge

Sent from my Redmi Note 4X using Tapatalk
 

raymo2u

VU Donator
Platinum Contributor
Member For 4 Years
Unlisted Vendor
Six core aliens. I only got about 2 inches before the cores bunched up on me. I tried to go too fast. I'll try it again in a little while.

lygzLJS.jpg
try 6x30g and use 22g decore, dont even need to use Ribbon sliders ;), use 20g decore for 6x28g
 

CrazyChef v2.0

Gold Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Reddit Exile
VU Patreon
try 6x30g and use 22g decore, dont even need to use Ribbon sliders ;), use 20g decore for 6x28g
Yeah, with these smaller sized key rings I don't need sliders. They're quite taut and balance well.

The 28g w/22g decore is fine, I just went too fast for the physics of the build.
 

mikekscholz

Member For 4 Years
So after a few days of use... These 10 ply staples I put in my petri rta is one of the best decisions I've ever made.... So much more flavor than my aliens and I didn't think it could get any better than those. Sucks juice a bit faster and it's more finicky to wick properly but worth it My IVC chewey lemon candy really tastes like real lemon drops.

image.jpeg
 

KarmicRage

Silver Contributor
Member For 2 Years
Member For 1 Year
Just some samples of builds Ive been doing.


22430558_1551793988242138_4949089775798714368_n.jpg
22500541_183342058901792_2448826275838558208_n.jpg


22580806_494237790943386_8490612214854582272_n.jpg
22582348_335854193544150_1553471520431407104_n.jpg
22708794_135708760487404_1667058622133174272_n.jpg
23100953_803765763163698_8086580612640538624_n.jpg


22639478_716023338586517_1573765532962783232_n.jpg
22793698_141774679902727_2136042344749727744_n.jpg
22794074_130734964350803_1579172102219497472_n.jpg
22710228_374993399598791_6912449915280949248_n.jpg
22793916_1937797169827430_3861229122986442752_n.jpg
22860763_235719633627832_2513408470707863552_n.jpg
22860587_284361082056302_7918429365942091776_n.jpg
22858273_1436381966479819_5706863362776760320_n.jpg
22858179_140200816732124_2796901515111956480_n.jpg
22860645_1375213809268118_1813680945828462592_n.jpg
I've been keeping up with your Instagram posts and gotta say I'm well impressed, beautiful work as always. Hows production coming on your little project?

Sent from my Redmi Note 4X using Tapatalk
 

Carambrda

Platinum Contributor
ECF Refugee
Member For 5 Years
So after a few days of use... These 10 ply staples I put in my petri rta is one of the best decisions I've ever made.... So much more flavor than my aliens and I didn't think it could get any better than those. Sucks juice a bit faster and it's more finicky to wick properly but worth it My IVC chewey lemon candy really tastes like real lemon drops.

View attachment 95930
If I may ask, what type of ribbon wire and wrap wire did you use? What size ribbon and size of the wrap wire?
 

Jriley

Bronze Contributor
Member For 3 Years
I tried to make an 8ply .4×.1 Ni80 / 40g Ni80 staple build and it vapes nice, but coiling it up was horror so I ended up throwing away most of my beautiful strand that measured almost 10 inches in length. :grumpy:

View attachment 95962
Sorry to see that bro.... Took me a long time and ALOT of money to figure out ribbon, you will get it.

Sent from my Moto G (5) Plus using Tapatalk
 

Carambrda

Platinum Contributor
ECF Refugee
Member For 5 Years
Sorry to see that bro.... Took me a long time and ALOT of money to figure out ribbon, you will get it.

Sent from my Moto G (5) Plus using Tapatalk
I was thinking maybe next time I will coil it up one wrap at a time by gently dry firing around my Coil Master Ceramic Stick whilst gently pulling on it each time after adding one more wrap. :D
 

Jriley

Bronze Contributor
Member For 3 Years
I was thinking maybe next time I will coil it up one wrap at a time by gently dry firing around my Coil Master Ceramic Stick whilst gently pulling on it each time after adding one more wrap. :D
Lol next time you wrap it pull on the lead with pliars and keep pulling hard as you wrap it.

Sent from my Moto G (5) Plus using Tapatalk
 

Carambrda

Platinum Contributor
ECF Refugee
Member For 5 Years
Lol next time you wrap it pull on the lead with pliars and keep pulling hard as you wrap it.

Sent from my Moto G (5) Plus using Tapatalk
Do you mean like this:
Code:
https://youtu.be/WE-S9dviEkc?t=1036
? lol :p
 

VU Sponsors

Top