Become a Patron!

Paratech

I forgot
VU Donator
Gold Contributor
Member For 4 Years
This was sent directly from 3CVape for review

PBcMLK8.jpg


Description provided by 3CVAPE:
"Designed by squirmingcoils and 3cvape.
Inspired by team members from @coilconspiracy.

This Conspiracy RDA is an silver plated low profile 24mmRDA.
This two post design is super easy to build on with spacious 3×1.5mm post holes.
Adjustable airflow for single or dual coil builds.
With the rare pure silver plated deck, we would like to call it a build machine."

aKizPAG.jpg


Arrived in a small plastic container.
Right side of the label shows the Conspiracy logo
@squimingcoils
@3cvape
Team @coilconspiracy

GnYtGgo.jpg


Left side reads:
Designed by squirmingcoils and 3cvape and inspired by team members from @coilconspiracy.
The conspiracy RDA is a silver plated low profile 24mm
This two post design is super easy to build on with spacious 3 x 1.5mm post holes.
Adjustable airflow for single or dual coil builds.
With the rare pure silver plated deck, we would like to call it a build machine.

C5ONIBf.jpg


Top cap just shows the 3cvape logo

mxAYcex.jpg


Instructions is a small simple page that plainly tells you how to assemble this RDA.

h7cPFtj.jpg


There are 4 bags of parts inside.
1. Screws, O-rings, and a gold plated 510 pin
2. Deck
3. Top cap and barrel
4. Ultem 810 drip tip, PEEK insulator, insulator ring, O-rings, screws, gold plated 510 squonk pin, and the positive post

GTsETfi.jpg

sWb1zbc.jpg

BwuiKow.jpg

g00WieZ.jpg


Plenty of spare parts.
Provides the opportunity for standard RDA or squonk option.
Both hex and slot screws.

qV8Lrxi.jpg

soiemjB.jpg

N0uHIDO.jpg

OWFCTpY.jpg


Close up of the spare parts

mDBbt2m.jpg

RCYkRBX.jpg

d1sXcrW.jpg

jL8IWYI.jpg


Drip Tip:
810 Ultem
12.32mm tall
17mm OD and says "3CVAPE" on one side.
12.62mm OD where it pushes into the top cap.
8mm ID at top and reduces to 6mm ID.
Will stand 8mm above the top cap.
 

Paratech

I forgot
VU Donator
Gold Contributor
Member For 4 Years
K3RfCOv.jpg

MabtGvt.jpg

gkWMIQ1.jpg

7Gu5Ujj.jpg


Top Cap:
(called "Airflow Ring" in the instructions)
15.5mm tall
24mm OD at top
21.78mm OD where it slips into the barrel
There are three air flow slots measuring 10.15mm X 2mm
These allow for single or dual air flow options.
One of the thinner O-rings will go around the outside of this and one of the thicker O-rings will be inserted into where the 810 drip tip goes in.
It has a conical shaped inner top with an 12.82mm ID for the drip tip.

rM0kkqr.jpg

vYIXSDk.jpg

gXdCkmh.jpg

TEI2Hu3.jpg


Barrel:
(called "Cap" in the instructions)
18.37mm tall
24mm OD
Two air flow slots measuring 9.9mm X 1.85mm
On one side is the Conspiracy Logo

weDAHFa.jpg

mGAvmPh.jpg

5cicLyR.jpg

BJtmPAl.jpg

xUrU338.jpg


Deck: (Silver plated)
15.38mm tall (Assembled)
22.82mm OD at base
22.05mm OD where barrel slips over
3mm deep well
Raised dual post Postless Style
Front facing screws (prevents your flat coils from being twisted)
Bottom of deck reads "BY SQUIMINGCOILS AND 3CVAPE" and "CONSPIRACY"
Two of the thinner O-rings will go around the base to seal and hold the barrel.

ic7nsq7.jpg

oCbuylp.jpg

s84eDR5.jpg

9NQ38Jg.jpg


Insulated Ring:
3.9mm tall
5.15mm OD X 4.29 ID at wider ring
4.25 OD X 3.1mm ID at narrower ring
 

Paratech

I forgot
VU Donator
Gold Contributor
Member For 4 Years
aLyfn9b.jpg

1ARhHDE.jpg

Jr0udgg.jpg

oLnwzio.jpg


PEEK Insulator:
2.7mm tall
3.45mm tall including where 510 pin goes through
5.97mm X 11.64mm
2mm deep

ViKYeGR.jpg

aAWouD5.jpg

PM08uRb.jpg

7DINdqD.jpg


Positive Post:
8.9mm tall
8mm X 5mm
The tab that gets the 510 pin threaded into it is 5mm X 10.45mm and is 2.1mm tall.

Post Holes are 2.9mm X 1.7mm and are 13.6mm apart.

24HM2Q5.jpg

nRP0qwL.jpg

ACT6sou.jpg


Standard and squonk version of gold plated 510 pins

UvoWYrY.jpg

lQZMkN6.jpg

450OLMp.jpg

PmeoVfX.jpg

zL1RxxV.jpg

qBkM9K3.jpg

vqBGoB3.jpg

JbXd1eC.jpg


Placing the O-rings on
 

Paratech

I forgot
VU Donator
Gold Contributor
Member For 4 Years
RXgelcy.jpg

jnRA9WY.jpg

AodDQMO.jpg


Be certain both insulators are installed properly.

iA73VZI.jpg

wzJg7yL.jpg

ORomMC7.jpg

EYbcbxV.jpg


Assembling and building (using squonk 510)

4mrKK9X.jpg

jHD1duX.jpg

X3cJkzW.jpg

SvtYXaO.jpg


Coils:
b_d_builders
3x26ss+36ss 4mm ID 6 wrap with the legs coming off centered instead of staggered or off set.
Legs cut to 6.2mm from the bottom of the coil.
I ran it with airflow wide open.
 
Last edited:

Paratech

I forgot
VU Donator
Gold Contributor
Member For 4 Years
rT1zREq.jpg

q0wvkQY.jpg

jZqk2Tb.jpg

3WCXsjc.jpg

KdNXzKp.jpg

gWxk6SB.jpg

NHVbCPB.jpg

P8hsDzN.jpg

1QwJkEk.jpg

CYBfCkf.jpg

ZP8gwSk.jpg


RGnWE94.jpg

6PCpr4P.jpg

QjnRinR.jpg

PxBgZO6.jpg

5Xf1Dhy.jpg

tjdD3n7.jpg

Wmnarzt.jpg


A few pics of it on the GeekVape GBOX S100

Entire RDA is 35.4mm tall
30.5mm without 510
22.55mm tall without 510 or drip tip

I decided to go with the squonk pin and use it on the GeekVape GBOX S100.
Turned out to be an awesome choice.

• Easy to assemble
• Easy to install coils
• Easy to wick
• No flooding
• Raised postless design provides a juice well
• Great flavor
• Plenty of vapor
• Plenty of airflow
• Dual or single coil build option.
• Silver plated stainless steel
• Available in Polished Silver or Matte Black
• Arrived 100% unassembled providing you the option to decide standard or squonk 510.
• Instructions provide the details of how to assemble.
• Both standard and squonk gold plated 510 pin included.
• Low profile deck design
• Both hex and slot screws

Designed by squirmingcoils in collaboration with 3cvape and inspired by team Coil Conspiracy.
 

Paratech

I forgot
VU Donator
Gold Contributor
Member For 4 Years
EIx6JET.jpg

2kBkZpj.jpg

B2Cep6d.jpg

bnGPZji.jpg

DGSNRDw.jpg

YRRsW6T.jpg

N2ktnWP.jpg

PBcMLK8.jpg


Pics from squirmingcoils

IlQAA26.png

YnTpYUZ.png

uGGkQeF.jpg

oNkOt2p.png

eFIgiF1.png


A few logo images

Where can you get a few of these for yourself?
https://www.squirmingcoils.net/product-page/conspiracy-rda $59.99

https://www.vapordna.com/3cvape-x-Squirmingcoils-Conspiracy-24mm-RDA-p/3csc24.htm $59.99 (code deals10)

https://www.vapehappy.com (out of stock at the time of this posting)

SquirmingCoils Info:
https://www.squirmingcoils.net/product-page/conspiracy-rda

https://instagram.com/squirmingcoils
Founder of team Coilconspiracy Designer of conspiracy_rda

https://www.facebook.com/squirmingcoilz/
 
Last edited:

VU Sponsors

Top