Become a Patron!

High End Mech's

CrazyChef v2.0

Gold Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Reddit Exile
VU Patreon
I know right? They'll be here (supposedly) on Thursday, so I'll check 'em out.
 

Fiddleback

Member For 2 Years
Member For 1 Year
I love that camo kennedy, it’s on my wish list. Kennedy’s are affordable, and hot fucking hard, probably the best value mechanical mods I’ve tried. Their website, kennedyvapor is great to watch daily, they throw some crazy specials on there from time to time. Got a roundhouse/atty combo (“blemished”, with no discernible blemishes) for 80 bucks. Love their switches, short throw, hard hitting
 

Fiddleback

Member For 2 Years
Member For 1 Year
image.jpg Yes they’re authentic. I’ve been watching this site for a year. These mods were upwards of 200, then every month they’ve been marking them down bit by bit to get rid of them, and they’ve finally hit ridiculously low prices. I got the kingpin and copper panzer in the mail yesterday. Look how old this panzer is, look at the patina. It’s #66, probably been on their shelves for a year and a half
 

r055co

VU Donator
Platinum Contributor
Member For 4 Years
Revisiting a couple of classic's

7lMcFWC.jpg
 

irradiated

Member For 4 Years
View attachment 98438 Love me some MCV Phil, copper cherry bomber, elite series. The elite hits harder than anything I’ve ever touched

This makes me jealous, I need to track down an MCV Elite one day.. they look too sick, up there on my list of most-wanted series mods.

FUK 182021 Scoundrels mod and Genießen RDA

View attachment 101046

This is really cool, a lot going on with the engravings. Is it a stacked tube? Looks big. :D
 

Carambrda

Platinum Contributor
ECF Refugee
Member For 5 Years
This is really cool, a lot going on with the engravings. Is it a stacked tube? Looks big. :D
:cheers: Sorry for my late reply... yea it is stacked and uses a removable extension piece. It can accept 18650/20700/21700 batteries so it really is big, and seriously expensive too, but worth it of course. :D
 

Fleshgod

Bronze Contributor
Member For 4 Years
Here are my higher end devices. Full brass Sith V2 with gold plated contacts. And SGS mods batman edition with the samurai V3 rda.
 

Attachments

  • 26733938_10155115300718021_6623065241849354885_n.jpg
    26733938_10155115300718021_6623065241849354885_n.jpg
    32 KB · Views: 57
  • 27497388_10155163623208021_1580640972_n.jpg
    27497388_10155163623208021_1580640972_n.jpg
    44.8 KB · Views: 64

mach1ne

Gold Contributor
Member For 4 Years
Here are my higher end devices. Full brass Sith V2 with gold plated contacts. And SGS mods batman edition with the samurai V3 rda.
hit me up if you ever want to sell that brass sith v2. i was just thinking about putting a post in the classifieds looking for some stuff, including one of those. i have never seen a brass one, its fuckin lovely :inlove:
 

Fleshgod

Bronze Contributor
Member For 4 Years
hit me up if you ever want to sell that brass sith v2. i was just thinking about putting a post in the classifieds looking for some stuff, including one of those. i have never seen a brass one, its fuckin lovely :inlove:
I am actually selling it! I have a pending sale on it so if it doesn't go through I'll let you know.

The SGS batman is also for sale if anyone is interested.
 

Fleshgod

Bronze Contributor
Member For 4 Years
hit me up if you ever want to sell that brass sith v2. i was just thinking about putting a post in the classifieds looking for some stuff, including one of those. i have never seen a brass one, its fuckin lovely :inlove:
PM me brother it is still available!
 
New from the Philippines

Karambit Mech Mod
SPECIFICATIONS:
-Single or series battery setup
-20700 battery capable with 18650 battery adaptor
-Built-in/Hidden tube extension
-Release button for series setup
-Unique 3d grips inspired by karambit knives
-Default silver-plated copper 510 telepin
-Pure 92.5 silver 510 telepin option (additional cost)*
-Made of brass: top-plate, inner tube, side plates, copper contacts (silver-plated)
-engraved delrin body
-serialized
27655461_938075039703963_3275720518925601062_n.jpg 27540895_938074973037303_6271464918835983646_n.jpg 27657339_938075063037294_2920113829367274733_n.jpg 27545737_938075116370622_3812723621490768521_n.jpg 27540984_938075103037290_2715617140544395275_n.jpg
 

PaulS

Gold Contributor
Member For 5 Years
Lone Wolf LE with the red spring and signed by the maker - #4. Apocalypse OG with cloud cap.
 

PaulS

Gold Contributor
Member For 5 Years
Nice, how do you like it plus do you have a V1 or V2 you can compare it too?

Well first off it is not a hybrid connection on the V3. It is a regular 510 - very easy to adjust for battery rattle. Of the tubes I own the Rigs were never the best. But they are not bad. The V3 has nice machining and hits fairly hard. Not as hard as a Purge or Able or Rogue though. The V@ which I had was hybrid. Now you can get the top for hybrid for the V3 if you like - it is an extra. Or you can use the V2 top.


You know me @r055co. We have traded mods in the past. I'm very fussy. I might not be the best judge. I got the V3 setup mostly because it only cost me 55 US. At that price it makes a great beater.
 

LokiM

Member For 2 Years
Member For 1 Year
a friend of mine is selling his Desolator by TowermodsPH i don't know if you guys are interested in it.

mods feel free to remove this post if its inappropriate.IMG_20180219_235600.jpg
 

KingPin!

In my defence, I was left unsupervised ^^
VU Donator
Platinum Contributor
Member For 4 Years
VU Challenge Team
Reviewer
a friend of mine is selling his Desolator by TowermodsPH i don't know if you guys are interested in it.

mods feel free to remove this post if its inappropriate.View attachment 104185

Put a sale up in hardware section if you wanna sell only way to get feedback from each other ;)
 

r055co

VU Donator
Platinum Contributor
Member For 4 Years
Got me a Subzero X Shorty a few weeks ago, I'm really digging it. I really, really love the switch on it for it's one of the best I've used. Super easy to break down, clean, maintain and has the perfect throw. The rest of the tube, damn nice and one hell of a performer, yep loving it so far and I'm sure I'm going to get another as a back up.

It's a tad messy, I've been Vaping the shit out of it ;)

xDP4b6T.jpg
 

strigamort

Bronze Contributor
Member For 2 Years
Member For 1 Year
Yah know I've been revisiting my 22mm atty's lately and really been enjoying them.

Fuel V1 and Rig V2

VDufEFg.jpg
Man I like that Rig in black. I really like mine with the snakeskin (or whatever it is) Cerakote finish, but I would have gone with black if they'd had em. Maybe one of these days I'll post a swap thread. Do you have a black Roughneck to go with it?

Here's mine-

8a8571cf3f240202271ee16ccf401e8f.jpg


The button is about 1000x nicer than the Admiral.

b6b3165abe85e51238cd41409fd628ab.jpg


Rig with a few buddies-

a01c215fbac3dac76cc0c28554ac6fbf.jpg


Btw, I didn't know anything about the Rig when I hit the buy button. I was totally bummed when I realized that my 24/25mm rda's weren't gonna run on it. After fiddling around, though, I realized that I can get a Wotofo Nudge to work because the base is smaller than most. The top cap fits over the deck. It only grabs a couple of threads and the top cap sits a little higher than normal, but it works perfectly and there's no compromise. In my opinion the Nudge is underrated. Some people struggle with building on it, but if you know what you're doing it's easy to build on and flavor is very good. Rig and Nudge are a great pair.

Sent from my ONEPLUS A3000 using Tapatalk
 

r055co

VU Donator
Platinum Contributor
Member For 4 Years
Man I like that Rig in black. I really like mine with the snakeskin (or whatever it is) Cerakote finish, but I would have gone with black if they'd had em. Maybe one of these days I'll post a swap thread. Do you have a black Roughneck to go with it?

Here's mine-

8a8571cf3f240202271ee16ccf401e8f.jpg


The button is about 1000x nicer than the Admiral.

b6b3165abe85e51238cd41409fd628ab.jpg


Rig with a few buddies-

a01c215fbac3dac76cc0c28554ac6fbf.jpg


Btw, I didn't know anything about the Rig when I hit the buy button. I was totally bummed when I realized that my 24/25mm rda's weren't gonna run on it. After fiddling around, though, I realized that I can get a Wotofo Nudge to work because the base is smaller than most. The top cap fits over the deck. It only grabs a couple of threads and the top cap sits a little higher than normal, but it works perfectly and there's no compromise. In my opinion the Nudge is underrated. Some people struggle with building on it, but if you know what you're doing it's easy to build on and flavor is very good. Rig and Nudge are a great pair.

Sent from my ONEPLUS A3000 using Tapatalk
Oh I really dig my Rigs, I also got pure silver contact and springs for them. They hit extremely well and are an awesome upgrade.

If you want a great tube for your 24/25mm attys get the SubZero X Shorty, I can't recommend it enough.

Sent from my HTC 10 using Tapatalk
 

irradiated

Member For 4 Years
New score, Heimdall.

Got it for a steal!

e0f7661f6d120c0112af4421d3f4efbd.jpg


Sent from my HTC 10 using Tapatalk

How's the Heimdall? Been seriously considering grabbing one. Is the lock ring irritating or is it good?

The only thing really holding me back from grabbing one is my complete lack of 22mm atties. :(
 

r055co

VU Donator
Platinum Contributor
Member For 4 Years
How's the Heimdall? Been seriously considering grabbing one. Is the lock ring irritating or is it good?

The only thing really holding me back from grabbing one is my complete lack of 22mm atties. :(
I recommend it, it's a very nice hard hitting mod. Easy to maintain, great machining. The look ring, I don't like them but this isn't bad, just put a dab of Noalox just to make it a bit smoother. The button is light and I've yet to have a misfire.

I recommend it, especially for the price, it's a steal.

Sent from my HTC 10 using Tapatalk
 

entropy1049

Bronze Contributor
Member For 1 Year
B60BF572-41D4-49C3-A3A8-FFF66443E4E8.jpeg
Oh man that's nice. I don't know much about that mod, but I really really like the look of it. Been wanting a series stacked tube setup.

Sent from my ONEPLUS A3000 using Tapatalk
Not flashy, but holy buckets the quality is there in spades. There are some nice designs for the Hammer in the cerakote option, I’m just not a flashy guy lol. Also comes in uncerakoted polished brass. The Elite RDA is just made for higher voltage vaping, tons of room in the deck and made with big series coils in mind. 18650, 20650, and 20700’s are all compatible. One of the best switches I’ve experienced in a tube mech. Armageddon makes good gear.

You can dress them up a bit if you desire, but Armageddon has placed the emphasis in machining and performance, and form follows function.
 
Last edited:

r055co

VU Donator
Platinum Contributor
Member For 4 Years
Nice!
Reminds me of the movie "Stargate"
Yeah the Anubis is still one of my favorite Parallel Mod's. The Clone that came out is shit but the Authentic is one hell of a great parallel. The Fuel V1 is also one hell of a good rda. I've been going back to the 22mm RDA'S and they've been great.

Sent from my HTC 10 using Tapatalk
 

KingPin!

In my defence, I was left unsupervised ^^
VU Donator
Platinum Contributor
Member For 4 Years
VU Challenge Team
Reviewer
Yeah the Anubis is still one of my favorite Parallel Mod's. The Clone that came out is shit but the Authentic is one hell of a great parallel. The Fuel V1 is also one hell of a good rda. I've been going back to the 22mm RDA'S and they've been great.

Sent from my HTC 10 using Tapatalk

They had some of these on Anubis mechs on box mod kings my side of the pond a while back, wish I took the hit now that’s a fine peice ro55co
:vino:
 

Pastorfuzz

Gold Contributor
Member For 4 Years
VU Patreon
Yeah the Anubis is still one of my favorite Parallel Mod's. The Clone that came out is shit but the Authentic is one hell of a great parallel. The Fuel V1 is also one hell of a good rda. I've been going back to the 22mm RDA'S and they've been great.

Sent from my HTC 10 using Tapatalk
Got some 22's myself on the cheap about 2 months ago.
One of them is an Authentic Cats. Nice flavor but a bitch to build.
Only using 2 coils in it. I don't have the patience to do 4.
 

VU Sponsors

Top