Become a Patron!

Post your builds

zephyr

Dirty Pirate Meg
VU Donator
Gold Contributor
Member For 4 Years
Unlisted Vendor
Wraith & Dead Rabbit. This is dull flavor. Lots of vapor and warmth. Dual coil. 30w. .47ohm. Metal unknown, 5 wrap@3mm.
MuAunQ6.jpg


RX200s & Wraith RDA. This is full flavor, warmth and clouds like a beast. Dual coil 36w. .41ohm. Kanthal A-1 5 [email protected].
ir725cr.jpg


I am thinking going back to the dual coil A-1 5 [email protected].

I'm frustrated.

Like @KarmicRage said... I would move the coils higher a tad, and much closer to your air holes, and either close off the air until it is no wider than the coils, or spread the coils out to make them wider. Raising wattage if you spread them out and keep air all open, also.

For Best flavor possible, I would close down air at least half way, and move my coils towards the side the hole will be, know what I mean? Like not perfectly in the middle, more close to the left post, each side...closer to the holes and higher also

Edit: .I dont know that RDA, can the sleeve move around wherever? You may not need to make the coils off-center, if you can move the air holes to the middle and still close it off some
 

hitti2

Bronze Contributor
Member For 4 Years
Ima scrap em. building the a-1 5 wrap that works. I've moved them towards the air flow holes, centered em, they are as high as they can go by the way I clipped the ends so when they were tilted towards the vent holes the coils wouldnt ground out to the drip cap.

aggravating.
 

zephyr

Dirty Pirate Meg
VU Donator
Gold Contributor
Member For 4 Years
Unlisted Vendor
Heck yeah. Big plans? I want to get some ribbon wire to try some staple coils. I'm off today so I may give the alien a shot when my wife goes to sleep after work.

Sent from my Nexus 6P using Tapatalk

Screenshot_20180202-082639.png

Dang man, I went from $25 for 1,000 ft to $19 for 2000!!! Higher guages though
 
Last edited:

Jriley

Bronze Contributor
Member For 3 Years
Btw .... I hate to do this I LOVE coil society but as a builder fuse wire/decore wire is always used up the fastest .....that being said King orchid on eBay has 1K ft of 38G kanthal D for 11$ and it's the highest quality you'll find especially the spooling. 40G I believe is 11$ also

Sent from my Moto G (5) Plus using Tapatalk
 

zephyr

Dirty Pirate Meg
VU Donator
Gold Contributor
Member For 4 Years
Unlisted Vendor
Btw .... I hate to do this I LOVE coil society but as a builder fuse wire/decore wire is always used up the fastest .....that being said King orchid on eBay has 1K ft of 38G kanthal D for 11$ and it's the highest quality you'll find especially the spooling. 40G I believe is 11$ also

Sent from my Moto G (5) Plus using Tapatalk

Thank you...I've never used kanthal D, I'll have to look up the differences first, but I'm Always down to save money
 

zephyr

Dirty Pirate Meg
VU Donator
Gold Contributor
Member For 4 Years
Unlisted Vendor
Heck yeah. Big plans? I want to get some ribbon wire to try some staple coils. I'm off today so I may give the alien a shot when my wife goes to sleep after work.

Sent from my Nexus 6P using Tapatalk

Did you try an alien today?

I just realized I don't get my refund until the 8th... :sad: sad Meg
 
Last edited:

Jriley

Bronze Contributor
Member For 3 Years
Thank you...I've never used kanthal D, I'll have to look up the differences first, but I'm Always down to save money
Kanthal A1 can reach a higher max temp then kanthal D .... Only difference. It's max temp is one well never see still , and it colors like SS but with more of a pastel color, it's beautiful.

Sent from my Moto G (5) Plus using Tapatalk
 

MrMeowgi

The Vapin' Drummer
VU Donator
Diamond Contributor
Member For 4 Years
Did you try an alien today?

I just realized I don't get my refund until the 8th... :sad: sad Meg
No I didn't. wife and I went for breakfast then just sat around as we don't EVER get childless time except for work. So we Vaped and watched some Dave Chappelle. Gotta get her car running again so we can put the spare car back up for the winter I hope. Maybe rainy Sunday will be a good day for that. One question though. Say I want a 3x26. Do I fuse a 24 then decore or a 28.

Sent from my Nexus 6P using Tapatalk
 

Jriley

Bronze Contributor
Member For 3 Years
No I didn't. wife and I went for breakfast then just sat around as we don't EVER get childless time except for work. So we Vaped and watched some Dave Chappelle. Gotta get her car running again so we can put the spare car back up for the winter I hope. Maybe rainy Sunday will be a good day for that. One question though. Say I want a 3x26. Do I fuse a 24 then decore or a 28.

Sent from my Nexus 6P using Tapatalk
It's a 3:1 ratio (for the most part) 26G decore for 3 x 26G cores

Sent from my Moto G (5) Plus using Tapatalk
 

MrMeowgi

The Vapin' Drummer
VU Donator
Diamond Contributor
Member For 4 Years
If you're wrapping 3x26 you will decore a 26g dude. Love Dave Chappelle as well haha what a guy

Sent from my MI MAX 2 using Tapatalk
I've got all his dvds. Both seasons and the extra ones he did.

Sent from my Nexus 6P using Tapatalk
 

mach1ne

Gold Contributor
Member For 4 Years
Hence my previous statement haha. It's a Friday night here as well and I'm more interested in building..... I must be getting old cause I used to look forward to weekend antics :/

Sent from my MI MAX 2 using Tapatalk
i was thinking the same thing about getting old...i have weekend antics coming up tonight and all i can think about is being out of wire and my broken chuck clamp...at least i got shipping confirmation on my raymo clamps today.
 

KarmicRage

Silver Contributor
Member For 2 Years
Member For 1 Year
i was thinking the same thing about getting old...i have weekend antics coming up tonight and all i can think about is being out of wire and my broken chuck clamp...at least i got shopping confirmation on my raymo clamps today.
Nice, can't wait for mine to get here as well. Man's an absolute legend. Kept 1 back for me to be able to buy as I was skint. Proper diamond. I'm still out of 35g and 36g so won't be trying any more alien staggs till then or anything in those gauges for that matter.

Sent from my MI MAX 2 using Tapatalk
 

zephyr

Dirty Pirate Meg
VU Donator
Gold Contributor
Member For 4 Years
Unlisted Vendor
Btw .... I hate to do this I LOVE coil society but as a builder fuse wire/decore wire is always used up the fastest .....that being said King orchid on eBay has 1K ft of 38G kanthal D for 11$ and it's the highest quality you'll find especially the spooling. 40G I believe is 11$ also

Sent from my Moto G (5) Plus using Tapatalk

I might get 38 and 40, from king orchid on ebay, when I get funds

Edit: Missing Posting My Builds so here
IMG_20180206_081852_HDR~2.jpg
I was getting ash on my teeth from the aliens, got to figure out how low the Pyro needs coils to go for the top to not get black

Edit: This build got black first day! I think my coils need to be Higher, not lower. Way higher than I'm used to
 
Last edited:

R.Savage

Bronze Contributor
Member For 4 Years
I might get 38 and 40, from king orchid on ebay, when I get funds

Edit: Missing Posting My Builds so here
View attachment 102643
I was getting ash on my teeth from the aliens, got to figure out how low the Pyro needs coils to go for the top to not get black

Edit: This build got black first daydda think my coils need to be Higher, not lower. Way higher than I'm used to
That is cool!!!!!

Sent from my SM-G935W8 using Tapatalk
 

AnthonyLouis

Silver Contributor
Member For 4 Years
Unlisted Vendor
I’ve actually been getting from King Orchid for a few years now... rayon actually put me on to him way back when.... he actually lives one state over from me so I always get it 2 days from order which is amazing. I actually got some .5 ribbon on its way over to me right now... but yeah he’s a real stand up guy, I only wish he would get some decent nichrome.


Sent from my iPhone using Tapatalk
 

Mykreign

Platinum Contributor
Member For 5 Years
I might get 38 and 40, from king orchid on ebay, when I get funds

Edit: Missing Posting My Builds so here
View attachment 102643
I was getting ash on my teeth from the aliens, got to figure out how low the Pyro needs coils to go for the top to not get black

Edit: This build got black first daydda think my coils need to be Higher, not lower. Way higher than I'm used to
Dang does that coil heat up before you touch the fire button? Lol

Sent from my SM-G950U using Tapatalk
 

AnthonyLouis

Silver Contributor
Member For 4 Years
Unlisted Vendor
I’ve actually been getting from King Orchid for a few years now... rayon actually put me on to him way back when.... he actually lives one state over from me so I always get it 2 days from order which is amazing. I actually got some .5 ribbon on its way over to me right now... but yeah he’s a real stand up guy, I only wish he would get some decent nichrome.


Sent from my iPhone using Tapatalk

Raymo actually put me on*** ^^^


Sent from my iPhone using Tapatalk
 

AnthonyLouis

Silver Contributor
Member For 4 Years
Unlisted Vendor
cc10bb0717f22660a2656c810ea40fe7.jpg
4d2a5e34be6d3067de46e9ca5bf583f3.jpg
6ae91936a15a8ad72fedbcb6c9e7f20a.jpg


Nothing special, just some framed staples for the Noisy Cricket 2
6-.4x.1/2- 24g/40g Fuse - Series Build

Just got my Spin LT and drill chuck clamp... time to get back to business!!! Trying to ease my way back into it and not just jump head first.


Sent from my iPhone using Tapatalk
 

zephyr

Dirty Pirate Meg
VU Donator
Gold Contributor
Member For 4 Years
Unlisted Vendor
cc10bb0717f22660a2656c810ea40fe7.jpg
4d2a5e34be6d3067de46e9ca5bf583f3.jpg
6ae91936a15a8ad72fedbcb6c9e7f20a.jpg


Nothing special, just some framed staples for the Noisy Cricket 2
6-.4x.1/2- 24g/40g Fuse - Series Build

Just got my Spin LT and drill chuck clamp... time to get back to business!!! Trying to ease my way back into it and not just jump head first.


Sent from my iPhone using Tapatalk

Man that 40g is SHINY! SMOOOOOTH wrapping...I'm struggling with even round wire building last couple days with this frustrating Pyro, delicious but frustrating air config...ordering wire TOMORROWWWWW then, I WILL jump in head first and waste it in one week ( I mean make some rad fused staples and stuff)
Lol
44e518ffa4eb45b6364e9a96d016c2f4.gif


Sent from my SM-G950U using Tapatalk

Lmao yes shiny
 

AnthonyLouis

Silver Contributor
Member For 4 Years
Unlisted Vendor
Man that 40g is SHINY! SMOOOOOTH wrapping...I'm struggling with even round wire building last couple days with this frustrating Pyro, delicious but frustrating air config...ordering wire TOMORROWWWWW then, I WILL jump in head first and waste it in one week ( I mean make some rad fused staples and stuff)


Lmao yes shiny

Ha thanks... starting to get the fusing down nice and tight again... kinda like riding a bike!! Good luck with your building Tom!! I’m either going to practice my aliens or my staggered variations Tom.


Sent from my iPhone using Tapatalk
 

zephyr

Dirty Pirate Meg
VU Donator
Gold Contributor
Member For 4 Years
Unlisted Vendor
Ha thanks... starting to get the fusing down nice and tight again... kinda like riding a bike!! Good luck with your building Tom!! I’m either going to practice my aliens or my staggered variations Tom.


Sent from my iPhone using Tapatalk

I really want to do a stagger with 4 or 5 staggered cores, like JRiley posted the other day, that would take a lot more care and prep than I've done before. And gotta try some staples, Never vaped a framed staple before.
 

AnthonyLouis

Silver Contributor
Member For 4 Years
Unlisted Vendor
I really want to do a stagger with 4 or 5 staggered cores, like JRiley posted the other day, that would take a lot more care and prep than I've done before. And gotta try some staples, Never vaped a framed staple before.
In my honest opinion, out of all the builds I've done, nothing vapes like a framed staple. Alien wrap on it is obviously better, but regular fuse is still amazing... even staggered fuse frame Staples and stagertons are amazing. Just any variation of framed Staples really,. Just nothing compares to having all those little grooves for your juice to sit in!!

This is actually why I was so excited when I heard about the Neutron RDA by Jaybo. It gave me the opportunity to throw so fat framed Staples on top of a series mod. 6(.4x1)/2(24g)/40g fuse dual coil 4\5 wrap would normally ohm out around .08-09ish I believe.. sitting on the Neutron (in series deck mode), my duals are sitting around .36ohm.. more then safe for series mode on the Noisy Cricket 2. Love this setup!!!!!

Sent from my SM-G928T using Tapatalk
 

Jriley

Bronze Contributor
Member For 3 Years
I really want to do a stagger with 4 or 5 staggered cores, like JRiley posted the other day, that would take a lot more care and prep than I've done before. And gotta try some staples, Never vaped a framed staple before.
You'd be surprised Meg , you ever want to dive into that all ya gotta do is ask or get on Instagram

Sent from my Moto G (5) Plus using Tapatalk
 

CrazyChef v2.0

Gold Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Reddit Exile
VU Patreon
In my honest opinion, out of all the builds I've done, nothing vapes like a framed staple. Alien wrap on it is obviously better, but regular fuse is still amazing... even staggered fuse frame Staples and stagertons are amazing. Just any variation of framed Staples really,. Just nothing compares to having all those little grooves for your juice to sit in!!

This is actually why I was so excited when I heard about the Neutron RDA by Jaybo. It gave me the opportunity to throw so fat framed Staples on top of a series mod. 6(.4x1)/2(24g)/40g fuse dual coil 4\5 wrap would normally ohm out around .08-09ish I believe.. sitting on the Neutron (in series deck mode), my duals are sitting around .36ohm.. more then safe for series mode on the Noisy Cricket 2. Love this setup!!!!!

Sent from my SM-G928T using Tapatalk
Cool! I've been looking for another series RDA, and haven't heard of this one for some reason. Just ordered it. :D
 

AnthonyLouis

Silver Contributor
Member For 4 Years
Unlisted Vendor
Cool! I've been looking for another series RDA, and haven't heard of this one for some reason. Just ordered it. :D

It’s pretty amazing man... I do kinda wish they made it strictly series mode (neutral post permanently installed) so that your build space was a bit larger. Don’t get me wrong, you can still fit some big boys in there, I just would have liked the option to go a little bigger. The build I posted above is pretty much utilizing all of the build space. I do suppose you could make the wire stack a little wider and do less wraps and make the coil diameter larger... you can definitely do 4mm with no issues IMO (didn’t try it but pretty sure it works)..

My BIGGEST gripe with the rda is the damn drip tip setup. He still didn’t transfer over to the 810/Goon style. He’s still using the Indestructible slam caps so it’s not the easiest finding new ones. That being said, the slam cap is all SS so if your chain vaping it can get hot. If you have any idea where I could grab a new cap, PLEASE let me know!!!!!
 

VU Sponsors

Top