Last year VAPORESSO Co. have launched some interesting device of «Revenger» series, but I`d had no possibility of review any ot them, but now, thanks to the company`s manager, I have bright and really interesting device – VAPORESSO Revenger Kit, and now would like to tell you about it.
VAPORESSO SWAG Kit came to me in a long box, on the sides of which there is too much info about box mod, chip and atomizer.
The set is standard and includes the most important things, which will help to start using it.
Do you agree, that vaping isn`t only for 150W lovers, but for smart people, who prefer the golden middle? If so, look at it!
On the face side there is a small black`n`white display with a low brightness, and also there are «Fn» и «Fire» buttons.
The display contains such indices as wattage, temperature, mode name, battery indicator, user preference (HIGH, SOFT, NORM – for VW; Ni, Ti, SS – for TC; M1, M2 – for TCR), resistance, voltage , puff counter ant their timer, curves of wattage or temperature. Of course, they depends on chosen mode.
On the right side you can see decorating bright insert and small and not convenient navigation rocket: it`s difficult to push it, when hold on the device in hand.
On the left side there is micro USB port, which supports 2A current.
On the top by the edge manufacturer`s put the company`s name «VAPORESSO» and higher – the spring-loaded 510 centered connector, which can take in atomizer up to 23 mm in diameter and the cover of battery compartment.
Firstly, when I saw it, I thought, that my lips would have touched it, but I had mistaken, and this is good, that designers`ve counted the dimension between it and atomizer platform.
On the bottom there are some venting holes.
For to turn the device on/off – press «Fire» for 5 times.
Buttons block – turn «+» и «Fn» at the same time.
The transition to standby mode – push «+» and «-» at the same time.
For to check firmware version – clamp «Fire» and «Fn» at the same time.
For to change screen rotation – clamp «- and «+» at the same time.
The enter in main settings menu can be done, when you clamp «-» and «Fire» at the same time, and then you will see the tree of settings branches, where you can navigate with the help of «+», «-» и «Fn» and activate the needed parameter by «Fn» long press.
VW MODE– Varivatt mode, where you can set the user mode (HIGH, NORM, SOFT);
VT MODE– Thermo control mode, where you can set the wattage;
DEFAULT – set the factory settings;
SMART ON/OFF – it allows to use VW mode without user preferences (HIGH, NORM, SOFT );
SCREEN TIMEOUT – here you can set the time, after which the box mod turns into standby mode;
BRIGHTNESS – you can set the brightness;
VAPORESSO SWAG Kit came to me in a long box, on the sides of which there is too much info about box mod, chip and atomizer.
The set is standard and includes the most important things, which will help to start using it.
VAPORESSO SWAG Kit set:
1 * VAPORESSO SWAG box mod;
1 * VAPORESSO NRG SE Tank;
1 * Replacement coil head GT1;
1 * Replacement coil head GT CCELL;
1 * Spare glass tube;
1 * USB cable;
3 * Spare o-rings;
2 * User manual;
1 * Warranty card;
1 * Warning card
SWAG box mod is of a high-quality and compact sizes device, which has a really good appearance and some attractive colors.1 * VAPORESSO SWAG box mod;
1 * VAPORESSO NRG SE Tank;
1 * Replacement coil head GT1;
1 * Replacement coil head GT CCELL;
1 * Spare glass tube;
1 * USB cable;
3 * Spare o-rings;
2 * User manual;
1 * Warranty card;
1 * Warning card
Do you agree, that vaping isn`t only for 150W lovers, but for smart people, who prefer the golden middle? If so, look at it!
VAPORESSO SWAG box mod parameters:
Sizes: 74 mm (from the top of the battery cover) * 42 mm * 24 mm;
Color: Black, Blue, Red, Gunmetal, Silver, Orange
Sizes: 74 mm (from the top of the battery cover) * 42 mm * 24 mm;
Color: Black, Blue, Red, Gunmetal, Silver, Orange
On the face side there is a small black`n`white display with a low brightness, and also there are «Fn» и «Fire» buttons.
The display contains such indices as wattage, temperature, mode name, battery indicator, user preference (HIGH, SOFT, NORM – for VW; Ni, Ti, SS – for TC; M1, M2 – for TCR), resistance, voltage , puff counter ant their timer, curves of wattage or temperature. Of course, they depends on chosen mode.
On the right side you can see decorating bright insert and small and not convenient navigation rocket: it`s difficult to push it, when hold on the device in hand.
On the left side there is micro USB port, which supports 2A current.
On the top by the edge manufacturer`s put the company`s name «VAPORESSO» and higher – the spring-loaded 510 centered connector, which can take in atomizer up to 23 mm in diameter and the cover of battery compartment.
Firstly, when I saw it, I thought, that my lips would have touched it, but I had mistaken, and this is good, that designers`ve counted the dimension between it and atomizer platform.
On the bottom there are some venting holes.
For to turn the device on/off – press «Fire» for 5 times.
Buttons block – turn «+» и «Fn» at the same time.
The transition to standby mode – push «+» and «-» at the same time.
For to check firmware version – clamp «Fire» and «Fn» at the same time.
For to change screen rotation – clamp «- and «+» at the same time.
The enter in main settings menu can be done, when you clamp «-» and «Fire» at the same time, and then you will see the tree of settings branches, where you can navigate with the help of «+», «-» и «Fn» and activate the needed parameter by «Fn» long press.
VW MODE– Varivatt mode, where you can set the user mode (HIGH, NORM, SOFT);
VT MODE– Thermo control mode, where you can set the wattage;
DEFAULT – set the factory settings;
SMART ON/OFF – it allows to use VW mode without user preferences (HIGH, NORM, SOFT );
SCREEN TIMEOUT – here you can set the time, after which the box mod turns into standby mode;
BRIGHTNESS – you can set the brightness;
