I hate to ask after i bought.. but here i go..
does this look like a good built box mod?
it will be here by monday..
does this look like a good built box mod?
it will be here by monday..
Become a Patron!
Does this build look alright?
- Thread starter Smoky Blue
- Start date
how low?? and i did pick up that aspire atlantis, Hobby..
do you think it will be alright with this?
think the description was 20 or 22g
Description:
This is a simple and very clean box mod. Hammond 1590b inclosure. Single 26650 battery sled which is 3D printed for optimum fit of battery. Solid 20 gauge wiring for low voltage drop. Stainless steel anti-vandal switch. Flush mount brass 510 connection. Hard hitting mech box mod. NOT RECOMMENDED FOR BEGINNERS !
This is a simple and very clean box mod. Hammond 1590b inclosure. Single 26650 battery sled which is 3D printed for optimum fit of battery. Solid 20 gauge wiring for low voltage drop. Stainless steel anti-vandal switch. Flush mount brass 510 connection. Hard hitting mech box mod. NOT RECOMMENDED FOR BEGINNERS !
Well I do like 26650s.
They say hard hitting but the wires would get hot under those conditions. You really need to go as low as 1ohm on a mech to be drawing enough power from your battery to get a hit. I just looked and saw the aspire Atlantis offers coils as low as 0.5 so if you can get something a tad higher you should be safer. Just keep a watchful eye on it as you vape when you first get it.
Else can you rebuild? If so then any rba will suit it.
They say hard hitting but the wires would get hot under those conditions. You really need to go as low as 1ohm on a mech to be drawing enough power from your battery to get a hit. I just looked and saw the aspire Atlantis offers coils as low as 0.5 so if you can get something a tad higher you should be safer. Just keep a watchful eye on it as you vape when you first get it.
Else can you rebuild? If so then any rba will suit it.
i can rebuild.. i like mine between .4 and .6
i do have some drippers..
might try the aspire out on one of my mechs.. just depends..
thanks Hobby.. not sure what I will do with this mod..
I rather be safe than sorry..
i do have some drippers..
might try the aspire out on one of my mechs.. just depends..
thanks Hobby.. not sure what I will do with this mod..
I rather be safe than sorry..
i think it will be fine, Hobby..
i tend to get nervous on new mods
i think I will be happy with the new set up.. if not.. will pop it up here for someone else to snag..
i tend to get nervous on new mods
i think I will be happy with the new set up.. if not.. will pop it up here for someone else to snag..
you're right Unc, and that was my first thought and maybe fit a poly fuse. But then i thought it defeats the whole purpose of buying a mod and paying out.
if it came into my hands i'd pop a cheap little vamo board in there and on/off switch to switch between mech and regulated for running higher ohms. there's plenty of room for one
giggles.. maybe if i find it won't work right.. one of you would like to tinker with it.. I won't mind.
Could work a deal out with some juice.. possibly..
I don't know on putting a board on it.. I forgot all about the vv/vw's.. and not sure i want to play with those..
I do enjoy unregulateds.. and my drippers.. but with the sub ohm thang coming.. was hoping it could work with this..
they both should be here Monday..
omg, my mail man is so going to hate me, i know i have over 50 items, all coming by mail.. wee!!
but my Christmas shopping is done!
Could work a deal out with some juice.. possibly..
I don't know on putting a board on it.. I forgot all about the vv/vw's.. and not sure i want to play with those..
I do enjoy unregulateds.. and my drippers.. but with the sub ohm thang coming.. was hoping it could work with this..
they both should be here Monday..
omg, my mail man is so going to hate me, i know i have over 50 items, all coming by mail.. wee!!
but my Christmas shopping is done!
It's silly really. It makes no sense that whoever made it didn't use thicker guage wire. Maybe he began with a dna build and blew it lol.giggles.. maybe if i find it won't work right.. one of you would like to tinker with it.. I won't mind.
Could work a deal out with some juice.. possibly..
I don't know on putting a board on it.. I forgot all about the vv/vw's.. and not sure i want to play with those..
I do enjoy unregulateds.. and my drippers.. but with the sub ohm thang coming.. was hoping it could work with this..
they both should be here Monday..
omg, my mail man is so going to hate me, i know i have over 50 items, all coming by mail.. wee!!
but my Christmas shopping is done!
Hahaha I do feel sorry for my postman sometimes. I buy a lot of all sorts of gear and clothes and wotnot off the world wide wobble. But I do tip him occasionally.
I dont know.. but it was a cheap one.. home built.
i dont have much invested in it, so it's all good..
i dont have much invested in it, so it's all good..
i haven't decided if that is glue or melted plastic yet, either..
Uber300
Bronze Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
It's glue, holds the 510 in place. If you have any, even slight, background with electronics, get a 510 from www.fatdaddyvapes.com, go to the local hardware store and buy about 1 and half feet of 16 to 18 gauge solid copper wire(uncoated), just looks cooler, and go at it. It will be a lot easier than you think. By the time it's ready to use, you will be able to sub down to .2, or even lower, I don't personally because I think it's unsafe. By the way, the 3D printed battery sleighs are awesome. I have used them in 5 builds now and would use nothing else, perfect fit, and if you know the printer or can get a hold of one yourself, your imagination is your only limit.i haven't decided if that is glue or melted plastic yet, either..
I think for what I want it for, it will work out nice..
can't wait for it to get here!!
i am thinking sometime on building my own..
will have to start paying attention in the modding area soon.. *evil giggles..
can't wait for it to get here!!
i am thinking sometime on building my own..
will have to start paying attention in the modding area soon.. *evil giggles..
I keep looking at those unregulated mod boxes. They run about 100 on ebay, and I would like to have one. But, I think I'd rather build my own. Just wish there was a kit with everything I wanted/needed that was priced right. Not paying 100 for a kit when built is 100.
100 bucks buys me another Sigelei.
100 bucks buys me another Sigelei.
@freemind here is a link for a daul 18650 kit. http://shop.findmyvapes.com/collections/frontpage/products/diy-unregulated-dual-18650-box-mod-kit
And there is even a Youtube video to go with it.
And there is even a Youtube video to go with it.
that is a heck of a find, oggy.. pretty sweet!
pretty sweet!
Thanks!
MrFixIt
Member For 4 Years
There is if he hasn't sold out of them. Go on you tube and search find my vapes and he has instructional videos on how to build unregulated mechs, OKR box and DNA box mods. He has a sight where he sells kits with everything you need.I keep looking at those unregulated mod boxes. They run about 100 on ebay, and I would like to have one. But, I think I'd rather build my own. Just wish there was a kit with everything I wanted/needed that was priced right. Not paying 100 for a kit when built is 100.
100 bucks buys me another Sigelei.
I just had to say something. I don't know if you are aware but the fatdaddyvapes 510's are fairly new on the scene. What you call junk a lot of us have been successfully using for years. I personally have a mod I built 3 years ago with a brass 510 that still works and hits like new so unsure why you are badmouthing them. Did you have a bad experience with one?
All i can say is, i am enjoying my box mod.. looking for a dremel now, and want to do some etchings on it
and the 510.. i dont see any brass on mine.. bit lost there.. it's flush on the mod.. and havent had too many issues with changing out drippers.. works pretty good.. my battery lasts about a day and a half..
pretty sweet deal i found.. i am happy for now.. till some other eye candy comes by
and the 510.. i dont see any brass on mine.. bit lost there.. it's flush on the mod.. and havent had too many issues with changing out drippers.. works pretty good.. my battery lasts about a day and a half..
pretty sweet deal i found.. i am happy for now.. till some other eye candy comes by
A connector with stainless steel threading and integral landing pad provides a much stronger physical connection and lateral support. The spring loaded positive pin allows for flush mounting of atty's to take advantage of the strong physical connection provided as well as providing a consistent electrical connection. Using a soft, fixed pin connector is understandable when it was the only option. Now that connector tech has advanced and better products are available for cheap, using the crap you were stuck with in the past is ridiculous. This all seems pretty obvious, so I'm not really sure what your point was. You were stuck with using inferior parts in the past. Now your not. What's the problem with pointing that out? Did you somehow think I was insulting people for not using parts in the past that weren't available at the time?
does anyone know where else to look for on the kits??
the guy is all sold out :/
the guy is all sold out :/
Facebook groups smoky
well i have a friend that makes eyeboxes, well used to.. he is a bit busy right now..
but this is what he built for me..
and no that is not copper wire.. it's actually copper sheeting
will be nosey and look around my groups..
i like little boxes.. they keep me happy!
i like little boxes.. they keep me happy!
@Smoky Blue i found this easier to printscreen than type out. Here's a few groups to search for. Some nice looking modded boxes and skins in there
i am in this one.. but for some reason wasn't getting any messages from the group..
i have a lot of private and hidden groups.. grr.. makes things hard to find..
https://www.facebook.com/groups/527372200653396/
but i saved your pic and will go peeep at those too..
i'd like to grab a kit and play with one, to make some mods for friends
i have a lot of private and hidden groups.. grr.. makes things hard to find..
https://www.facebook.com/groups/527372200653396/
but i saved your pic and will go peeep at those too..
i'd like to grab a kit and play with one, to make some mods for friends
Thanks! I'm in it now tooi am in this one.. but for some reason wasn't getting any messages from the group..
i have a lot of private and hidden groups.. grr.. makes things hard to find..
https://www.facebook.com/groups/527372200653396/
but i saved your pic and will go peeep at those too..
i'd like to grab a kit and play with one, to make some mods for friends
will turn on notifications once i have some funds and tools to work with..
@Smoky Blue here is a small dremel that might be nice for engraving.
http://www.walmart.com/ip/Dremel-7300-N-5-4.8V-MiniMite-Cordless-Rotary-Tool/15173820
http://www.walmart.com/ip/Dremel-7300-N-5-4.8V-MiniMite-Cordless-Rotary-Tool/15173820
I like that one, Oggy and its not all big and clunky.. I have a good work table too!
thanks for finding it.. and omg it's in my price range!!
oh wow.. maybe Santa bring me a dremel!! YAY!!
If you are only wanting to do engraving this is also an option. it is corded but is smaller.
http://www.harborfreight.com/rotary-tool-kit-80-pc-69451.html
http://www.harborfreight.com/rotary-tool-kit-80-pc-69451.html
Was planning on using it to expand my holes in my drippers too..
few other useful things.. but i do like that kit.. with the wally world dremel
haha!!our harbor freight is like on the other side of town.. but still it's a good price for those pieces..
Oggy, you are fantastic
Did you find any modboxes or makers? Do you want to start building them yourself? I found a link on fb of someone asking the same question and there's a couple of replies in the comments https://m.facebook.com/groups/425183507574092?view=permalink&id=756825121076594
CurlyxCracker
Gold Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
There's so much room! What box is that?Send it to me and i will have it rebuilt for you. This is the kind of work my guy here does.
Hammond 1590B Death Modz "Great Llama" Serial #005
Hard to tell in the bottom pic...but the inside of the box and lid were coated with commercial spray in bedliner like they use in pickup trucks. This provides thermal and contact protection.
Hard to tell in the bottom pic...but the inside of the box and lid were coated with commercial spray in bedliner like they use in pickup trucks. This provides thermal and contact protection.
Last edited:
Those fd 510s are such a pleasure to work with. They make modding enjoyable.Send it to me and i will have it rebuilt for you. This is the kind of work my guy here does.
The reason for all the room is that most of the wiring and MosFet are all under the breadboard.
He is currently building me a triple 18650 in the same size box. Yellow with red splatter....hand airbrushed hotdogs. It will be called the "Oscar Meyer Wiener #001" as a friendly jab at the "Mad Wiener" box lol.
lol.. that is sweet, franciscan.. but i have grown rather attached the my ugly box mod rofl!!
gona pick up a dremel next month and doodle all over it i cant wait!
i have a few ideas, and well.. for what i paid for it, it isnt too bad.. my 26650 lasts me about a day and a half..
in fact, i use it more than this caravela? i snagged from the pif box.. surprised me, but i like it..
thanks for the offer, but maybe once i anti up my funds again, i might pick up another kit or box mod..
gona pick up a dremel next month and doodle all over it
i cant wait! i have a few ideas, and well.. for what i paid for it, it isnt too bad.. my 26650 lasts me about a day and a half..
in fact, i use it more than this caravela? i snagged from the pif box.. surprised me, but i like it..
thanks for the offer, but maybe once i anti up my funds again, i might pick up another kit or box mod..
Those dremels can be an addiction. They can be for me. Once I have to use one for something I start going round the place looking for things to buff up or saw!lol.. that is sweet, franciscan.. but i have grown rather attached the my ugly box mod rofl!!
gona pick up a dremel next month and doodle all over it
i have a few ideas, and well.. for what i paid for it, it isnt too bad.. my 26650 lasts me about a day and a half..
in fact, i use it more than this caravela? i snagged from the pif box.. surprised me, but i like it..
thanks for the offer, but maybe once i anti up my funds again, i might pick up another kit or box mod..