Become a Patron!

Post your builds

Shredtravolta

VU Donator
Silver Contributor
Member For 4 Years
Unlisted Vendor
What gauge were your cores? I could get both one bump or two bumps depending on the stretch, on one side, and either two or three on the other side, depending on stretch


Mine changed when I coiled it - I should try again and coil it the opposite side up and see
I just followed the Ndevine tutorials and copied what he did exactly. There’s one that’s a second prerecorded build of the enigma and one called trying hedgehogs. He seemed to break it down pretty well. Both sides should be identical I think.
 

zephyr

Dirty Pirate Meg
VU Donator
Gold Contributor
Member For 4 Years
Unlisted Vendor
I just followed the Ndevine tutorials and copied what he did exactly. There’s one that’s a second prerecorded build of the enigma and one called trying hedgehogs. He seemed to break it down pretty well. Both sides should be identical I think.


My dad is graciously taking my daughter swimming after dinner, so I'm going to re-make whatever the heck anyone wants to call the enigmahedgehogechidnawithshoulderpads thing, and take pictures of the stick before coiling

Kicking myself again for not doing that the first time (taking pictures before coiling)
 

wildgypsy70

“Widgy Pidgy”
Staff member
Senior Moderator
VU Donator
Platinum Contributor
VU Challenge Team
Member For 5 Years
VU Patreon
I have to say, some of these coils are stunning! I’m just starting to get into(read: use coils made by other people that I got in trades) more complex coils. True beauty here, everyone! Loving all the pictures.
 

Shredtravolta

VU Donator
Silver Contributor
Member For 4 Years
Unlisted Vendor
My dad is graciously taking my daughter swimming after dinner, so I'm going to re-make whatever the heck anyone wants to call the enigmahedgehogechidnawithshoulderpads thing, and take pictures of the stick before coiling

Kicking myself again for not doing that the first time (taking pictures before coiling)
That would be awesome if you could just get a shot at the stick! I would love to compare it to the patterns I’m getting. I did one that was okay last night but it wasn’t interlocked or stitched so it didn’t look much different than a mowhawk, it just had the bump on both sides. I didn’t think much of it and tossed it.
 

gopher_byrd

Cranky Old Fart
VU Donator
Diamond Contributor
ECF Refugee
Member For 5 Years
VU Patreon
I have to say, some of these coils are stunning! I’m just starting to get into(read: use coils made by other people that I got in trades) more complex coils. True beauty here, everyone! Loving all the pictures.
Ms. Gypsy, this is another rabbit hole to fall into... Coil building and DIY can create one huge hole...:giggle:
 

CrazyChef v2.0

Gold Contributor
ECF Refugee
VU Challenge Team
Member For 5 Years
Reddit Exile
VU Patreon
Decided to use the series deck option on the Titan for it's maiden voyage. The only mod I have (until the Titan PWM gets here) that it'll look good on is the H.O.G. clone I have so I figured I might as well beef up the coils to handle the voltage without getting too rambunctious. Decided on a pair of framed staples. 10 ply 0.4x0.1 KA1 cores with 28g KA1 frames, 40g N80 binding. 3.5mm I.D., 5/6 wraps, comes out to 0.43Ω.

In progress:

U1CnRA3.jpg



The deck. Its weird. Leads need to be at a 90° angle, and turned sideways in the top post to avoid squishing the leads.

bpkOIm5.jpg

Bh0VJZE.jpg

2qsRNeB.jpg
 

zephyr

Dirty Pirate Meg
VU Donator
Gold Contributor
Member For 4 Years
Unlisted Vendor
@KingPin! What should my next build be? Should I try for hedgehogs again, or can we call whatever that crazy threesome was "close enough?"
 

KingPin!

In my defence, I was left unsupervised ^^
VU Donator
Platinum Contributor
Member For 4 Years
VU Challenge Team
Reviewer
@KingPin! What should my next build be? Should I try for hedgehogs again, or can we call whatever that crazy threesome was "close enough?"

Sorry for some reason my notifications stopped had some catching up to do! Awesome work everyone, Chris love those braids in particular

Pitchfork next ^^ or a squalien meg ...back on page hmmm let me think 270-280 whiskywarrior posted probably one of my favourite ever coil pics

Anyway way he described it to me was you have a square core with ribbon stack with 2 frames sitting on top (of the vertical side of the stack) which creates a dent in the centre ...is a stubborn bastard of a build I’ve tried and failed multiple times

Closest I ever came and I failed to wrap it ...see if you can pull that one off hehe

3C1EEF69-6D2D-4DE5-8A23-E13BC82ECC70.jpeg
 

KingPin!

In my defence, I was left unsupervised ^^
VU Donator
Platinum Contributor
Member For 4 Years
VU Challenge Team
Reviewer
This is his post of the coil meg ...how good was that memory page 277!

Anyway ...back then was just starting building and it was one those ones that inspired me and always stuck ...never was able to do it and it pissed me off every time I failed so stopped and did something else instead

http://vapingunderground.com/threads/post-your-builds.737/page-277#post-1596773

You pull that off and I’ll be in awe of your awesomeness and same goes for anyone else for that matter.
 

zephyr

Dirty Pirate Meg
VU Donator
Gold Contributor
Member For 4 Years
Unlisted Vendor
This is his post of the coil meg ...how good was that memory page 277!

Anyway ...back then was just starting building and it was one those ones that inspired me and always stuck ...never was able to do it and it pissed me off every time I failed so stopped and did something else instead

http://vapingunderground.com/threads/post-your-builds.737/page-277#post-1596773

You pull that off and I’ll be in awe of your awesomeness and same goes for anyone else for that matter.


Squaliens it is - several days from now :(
 

KingPin!

In my defence, I was left unsupervised ^^
VU Donator
Platinum Contributor
Member For 4 Years
VU Challenge Team
Reviewer
Thanks! 5 loop slentre braid. This coil vapes so good too they’re actually worth the work hah just wish I had the patience to make two in a row.

Was it hard to keep the centre straight while braiding it? Do you use slider still and move them up as you go Chris always wanted to try this build it’s on my checklist
 

chrisakasparky

Silver Contributor
Member For 4 Years
Was it hard to keep the centre straight while braiding it? Do you use slider still and move them up as you go Chris always wanted to try this build it’s on my checklist

I make a stick with the loop at one end and glue it then I get the ribbons wet with vg and slide a ribbon slider from the loop toward the end and glue that. I tried with a slider before, but the braid gets snagged on it constantly. The stick stays pretty straight on its own as long as you don’t jerk it or no one bumps into you. The braid squeezes it together straight and square. The stick only has to be like 4 inches, I wouldn’t wanna try two on one stick cause I think then the ribbons would start to get wonky, and that’s just more potentially wasted ribbon wire hehe.

Edit: I make the stick about 6 inches so I have room Incase the ribbon gets wierd, so I can just snip the last inch
 

KingPin!

In my defence, I was left unsupervised ^^
VU Donator
Platinum Contributor
Member For 4 Years
VU Challenge Team
Reviewer
I make a stick with the loop at one end and glue it then I get the ribbons wet with vg and slide a ribbon slider from the loop toward the end and glue that. I tried with a slider before, but the braid gets snagged on it constantly. The stick stays pretty straight on its own as long as you don’t jerk it or no one bumps into you. The braid squeezes it together straight and square. The stick only has to be like 4 inches, I wouldn’t wanna try two on one stick cause I think then the ribbons would start to get wonky, and that’s just more potentially wasted ribbon wire hehe.

Edit: I make the stick about 6 inches so I have room Incase the ribbon gets wierd, so I can just snip the last inch

Thanks mate that’s really helpful advice :cheers:
 

Shredtravolta

VU Donator
Silver Contributor
Member For 4 Years
Unlisted Vendor
I love a good stagger...I can do em, but hate doing em. For whatever reason; Alien variations flow from my fingers like silk, but a stagger anything is like getting barbed wire from my asshole...

Sent from my SM-G965U using Tapatalk
I used to feel the same lol. I don't enjoy the staggered vapes as much as alien/fraliens.
 

ScReWbALL

Silver Contributor
Member For 4 Years
I love a good stagger...I can do em, but hate doing em. For whatever reason; Alien variations flow from my fingers like silk, but a stagger anything is like getting barbed wire from my asshole...

Sent from my SM-G965U using Tapatalk

I second this, and know the feeling all too well! Though I think mine is razor wire claptoned with barbed wire or the other way around...either way it’s horrible and anyone and anything in the general vicinity is in great danger when that thought of “I’ll think I’ll give staggering another shot..” pops into my head.
On a less related topic I just had someone poke their head in here, look around and simply say “There’s a fine line between Hobby and Addiction, and you’re flirting with it”...can’t a guy just make a couple of coils in peace?
b38a2659605632163651f715a4969a05.jpg



Sent from my iPhone using Tapatalk
 

VAPEROXX

Gold Contributor
Member For 4 Years
Unlisted Vendor
I second this, and know the feeling all too well! Though I think mine is razor wire claptoned with barbed wire or the other way around...either way it’s horrible and anyone and anything in the general vicinity is in great danger when that thought of “I’ll think I’ll give staggering another shot..” pops into my head.
On a less related topic I just had someone poke their head in here, look around and simply say “There’s a fine line between Hobby and Addiction, and you’re flirting with it”...can’t a guy just make a couple of coils in peace?
b38a2659605632163651f715a4969a05.jpg



Sent from my iPhone using Tapatalk
I know, right? I tell my wife "I'm going to build some coils"... She says "Didn't you build some yesterday?" Ugh... "Your point being?"

Sent from my SM-G965U using Tapatalk
 

mach1ne

Gold Contributor
Member For 4 Years
Thanks @mach1ne! Where you been brother? I haven’t seen you on the forum in a while. It’s great to see you back!:D:cheers:
im always lurking, i just dont have much in the way of time or builds lately. outside of the few builds i have posted in the last couple months, i have only built a few sets for some of my friends, and i never get to install/photograph those ones. i did a little prep today for a second attempt at a pitchfork, and i am really hoping to finish that tomorrow night.

congrats again on the alien stagg, thats high level stuff and you got it about as good as it gets. definitely a milestone build :cheers:
 

Shredtravolta

VU Donator
Silver Contributor
Member For 4 Years
Unlisted Vendor
im always lurking, i just dont have much in the way of time or builds lately. outside of the few builds i have posted in the last couple months, i have only built a few sets for some of my friends, and i never get to install/photograph those ones. i did a little prep today for a second attempt at a pitchfork, and i am really hoping to finish that tomorrow night.

congrats again on the alien stagg, thats high level stuff and you got it about as good as it gets. definitely a milestone build :cheers:
I really appreciate it, I could get it tighter, it took a lot of practice to get it to the point that it’s at but you know the more you practice the tighter you get. I can still improve but I’m happy that I was at least able to do some version of the alien stagg.:bliss:
 

VU Sponsors

Top