Become a Patron!

Aromamizer plus juice control not working

Mykreign

Mykreign

Platinum Contributor
Member For 5 Years
So all the sudden my JFC doesn't work. I've filled it about 10 times now and every time juice comes flying out the air flow even though the JFC is closed. I can vape it with the JFC closed as well at 70w and not get dry hits.

So I have to fill it, open air flow, tip it upside down and flick it plus fire the mod to clean out the chimney. Then it works fine.

I just took it apart and rewicked it, looking at the orings and I don't see one that would effect the seal from the JFC to the main chamber. Unless it's somehow coming through the threads that keep the JFC and tank section together.

Anyone have any insight or experienced this?

Sent from my SM-G950U using Tapatalk
 
ajvapes

ajvapes

Gold Contributor
Member For 5 Years
VU Patreon
Mykreign said:
So all the sudden my JFC doesn't work. I've filled it about 10 times now and every time juice comes flying out the air flow even though the JFC is closed. I can vape it with the JFC closed as well at 70w and not get dry hits.

So I have to fill it, open air flow, tip it upside down and flick it plus fire the mod to clean out the chimney. Then it works fine.

I just took it apart and rewicked it, looking at the orings and I don't see one that would effect the seal from the JFC to the main chamber. Unless it's somehow coming through the threads that keep the JFC and tank section together.

Anyone have any insight or experienced this?

Sent from my SM-G950U using Tapatalk
Click to expand...
I once had a tiny piece of cotton stuck between jfc and the chimney, rewicked a number of times before it poked out a little..
 
Mykreign

Mykreign

Platinum Contributor
Member For 5 Years
ajvapes said:
I once had a tiny piece of cotton stuck between jfc and the chimney, rewicked a number of times before it poked out a little..
Click to expand...
I'll look again next time but I washed it pretty good

Sent from my SM-G950U using Tapatalk
 
Mykreign

Mykreign

Platinum Contributor
Member For 5 Years
Heartsdelight said:
When taken apart when you turn the lock, unlock can you see the juice slot open & close? Other than that it has to be the o rings.
Click to expand...
It looks like it's closing to me. I'd have to be is a dark room and put a flashlight under it to be sure.

Idk what oring would cause it.

Sent from my SM-G950U using Tapatalk
 
Heartsdelight

Heartsdelight

VU Donator
Diamond Contributor
Member For 5 Years
Mykreign said:
It looks like it's closing to me. I'd have to be is a dark room and put a flashlight under it to be sure.

Idk what oring would cause it.

Sent from my SM-G950U using Tapatalk
Click to expand...
Don’t you have another Plus? I hope so, then you can compare. Try to see if you can find a diagram to see what o rings go where. @TrollDragon might know he uses his daily.
 
Mykreign

Mykreign

Platinum Contributor
Member For 5 Years
Heartsdelight said:
View attachment 136857
There should be an o ring in every section.
Click to expand...
Idk if there's supposed to be one here.
41ecdb5ec62d3b417ce0736a77997ef0.jpg

There are threads there and mine did not have an oring. I looked close at that part.

Sent from my SM-G950U using Tapatalk
 
Grandpa

Grandpa

Bronze Contributor
Member For 4 Years
I have found that the way these Aromamizers are wicked is the key. They are not particularly fussy but you need to get the cotton to cover the juice wells at the bottom thoroughly. Sometimes I have cut my tails a little too short and have ended up with the problem you describe. It's hard to get too much cotton stuffed down in there but you can get too little. I have experienced this sometimes with the single coil decks in particular.
 
Letitia9

Letitia9

Citrus Junkie
VU Donator
Platinum Contributor
Member For 4 Years
VU Challenge Team
Sessions Drummer on elr has several, maybe pm him over there.
 
You must log in or register to reply here.

VU Sponsors

Top