Become a Patron!

dead rabbit

hi all. i have a alien mag mod with dead rabbit rta tank. cant get good flavor. could you lovely ppl tell me best coils to get and best coil placement. i have bought about 100 pounds worth of juice and dont like none of it. only one i like is lemon tart by dina lady and even that dont taste good in this. please any help welcome.
 

Bigrick

Gold Contributor
Member For 4 Years
ECF Refugee
It is been a very long time since I've used my dead rabbit RDA. And we are talking RDA? Anyways I would probably have to work with it to get it tasting as it did before I put it away. However if I remember correctly I had the coils situated is close to the inside of the barrel as I could just underneath the airflow access. I'm sure somebody will come along and help you out a little better. Sorry about that.
 

IcepickMaker84

VU Donator
Gold Contributor
Member For 4 Years
ECF Refugee
I use fused Clapton’s in my Dead Rabbit rta’s and place the coils about 2-3mm above the deck of that makes sense. You have to really thin the wick ends out too. Dinner Lady LT is one of my favorites!
 

IcepickMaker84

VU Donator
Gold Contributor
Member For 4 Years
ECF Refugee
i just put clapton coils in like you said and i now have flavor thank you both so much. will order fused claptons now are staples good too. any othere juices i could try like dinner lady lt i like the strong sweet taste. thanx again.

Happy to help! You can use staple style coils in the Dead Rabbit, I’ve used a variety of coils in mine. Country Clouds Cornbread Pudding and Sad Boy Pumpkin Cookie might both be up your juice alley ha ha.
 
Last edited:

IcepickMaker84

VU Donator
Gold Contributor
Member For 4 Years
ECF Refugee
thank you very much. do you know what ohm coil you used. the one i have in now is saying 0.157
The coils I’m using now range from .15-.3 (per set), I currently have 3 Dead Rabbit rta’s going with a fourth on the bench lol
 
hi me again lol. im getting good flavor now but the ramp up time is very slow. i just put a alien tri-core fused clapton 3-26/36 in 3mm 25 ohm. i can do a full inhale before it gets hot enough to vape. this is in a dual coil dead rabbit. nealy there now just need to know this so i get the right coils. thanx.
 

Wb80

-DIY-demon-
VU Donator
Gold Contributor
Member For 4 Years
VU Patreon
Have a dead rabbit rta going atm. I use ni80 26 x4 wrapped in 38. Raise the coils off the deck like 2.5 to 3 mm. I always get decent flav and clouds.
 

Wb80

-DIY-demon-
VU Donator
Gold Contributor
Member For 4 Years
VU Patreon
hi me again lol. im getting good flavor now but the ramp up time is very slow. i just put a alien tri-core fused clapton 3-26/36 in 3mm 25 ohm. i can do a full inhale before it gets hot enough to vape. this is in a dual coil dead rabbit. nealy there now just need to know this so i get the right coils. thanx.
Wats the watts at?
 

Wb80

-DIY-demon-
VU Donator
Gold Contributor
Member For 4 Years
VU Patreon
Wish i had seen this earlyer as i had it open and could of taken some picks of coil placement.
 
Have a dead rabbit rta going atm. I use ni80 26 x4 wrapped in 38. Raise the coils off the deck like 2.5 to 3 mm. I always get decent flav and clouds.
Wats the watts at?
tried from 40 to 80 very slow ramp up and at 80 to hot when it do get going. i am using dead rabbit rta with a alien mag mod. can you give me a coil name with all the specifics so i can order. in 3 mm. wire gage and ohm please.
 
Last edited:

Wb80

-DIY-demon-
VU Donator
Gold Contributor
Member For 4 Years
VU Patreon
I build all my own. And the ones i didnt build myself i got from members here on the underground. So unfortunatly i haven't a clue about factory built coils to recomend.
But id go with an all ni80 4core clapton or alien. About .12 to .15 ohms.
 

VAPEROXX

Gold Contributor
Member For 4 Years
Unlisted Vendor
My wife loves her Dead Rabbit RTA! Here's some examples of what I build for her!
d4c890bf9fcca7335b6b5e69ab942e5e.jpg
deca62d5f301ba0061dc640396d6b832.jpg
71e97c0796278dbf51e173cd0d7bc7c4.jpg
167d029d29e193447f777279c9bae795.jpg
351b3c5fa50c98d21828be5c41449727.jpg
3e518491be28490021ae152998ab6a75.jpg


Sent from my Samsung Galaxy Note 10+ using Tapatalk -The Wire Spider-
 

DaBunny

Silver Contributor
Member For 2 Years
thanx. do you know what gage wire they are
36 over 28 gauge wire...

and SEE VAPER EVERY BODY ASKS ME DAT.. lol lol
so am glad you mixplaned it to me

My wife loves her Dead Rabbit RTA! Here's some examples of what I build for her!
d4c890bf9fcca7335b6b5e69ab942e5e.jpg
deca62d5f301ba0061dc640396d6b832.jpg
71e97c0796278dbf51e173cd0d7bc7c4.jpg
167d029d29e193447f777279c9bae795.jpg
351b3c5fa50c98d21828be5c41449727.jpg
3e518491be28490021ae152998ab6a75.jpg


Sent from my Samsung Galaxy Note 10+ using Tapatalk -The Wire Spider-

DATS da guy am talking about....

and he is even SWEET to ya when ya push da WONG buttons on paypal..
helps walk ya along from whatcha need to how to pay to even a proper install..
 

marter

VU Donator
Silver Contributor
Member For 4 Years
You've got a bad connection or broken coil. Check everything before you keep vaping that.

Edit: just reread and saw your 0.094. Did you pre burn the coil before wicking? Sounds like you didn't. Mine usually come up a bit after burning it in and checking for hot spots and getting coil to start heating from the middle outwards.
 
You've got a bad connection or broken coil. Check everything before you keep vaping that.

Edit: just reread and saw your 0.094. Did you pre burn the coil before wicking? Sounds like you didn't. Mine usually come up a bit after burning it in and checking for hot spots and getting coil to start heating from the middle outwards.
yes i did m8. could my tank be faulty.
 

marter

VU Donator
Silver Contributor
Member For 4 Years
yes i did m8. could my tank be faulty.
I'd try some different coils to cross check, but you may be right. Can you try the same coils in another deck? Troubleshooting 101, tank a, tank b, coil a, coil b, etc. See where the error goes.
 

ajvapes

Gold Contributor
Member For 5 Years
VU Patreon
Ok it is probably the Mag Grip 100 if it is a single 21700. What you might try is to setup the Dead Rabbit with a single coil between .12 and .18 ohms and see if that speeds up your ramp up time. With a lower power mod it may not have the power to handle the mass of heavy duals. My rabbit is setup as a single coil and works fine like that. also if it has preheat mode in wattage there will be a setting for S(soft) N (normal) H(hard). if it does H will give it a little boost at t beginning of the hit.
 

VU Sponsors

Top