Become a Patron!

Giveaway!Original Wotofo STNG MTL RDA

Gina3FVAPE

VU Vendor
VU Vendor
Diamond Contributor
Member For 4 Years
Hi, guys! Welcome to New Product Introduction ! I have a question: do you need a RDA at present? Today let me introduce you one RDA named Original Wotofo STNG MTL RDA . Now let’s take a closer look at the RDA below.

The Wotofo STNG MTL RDA is constructed from stainless steel material in 22mm diameter.The STNG MTL RDA features a droplet shaped air control design on its top cap. This amazing and classic design allows users to set their favorite airflow as freely as possible. The droplet air inlet resides on only one side of the top cap, so do put that side onto the deck side with air hole on. The spring-loaded post clamps are T-shaped to give convenient mounting for different coil directions. No need to remove the screws when installing coil, just loosening the screws a little will do. The coil is secured by top mounted Phillip screws on two sides, positioned right above the air supply holes. On entering the single-sided air inlet, the air is pulled into the center of the deck bottom and redirected into two air channels that are right underneath the coil spot, supplying double airflows right onto the coil. Such air splitting system provides soft and optimal vaporization. The narrow looking drip tiappears pretty nice with the overall design of this rebuildable dripping atomizer. The drip tip features 510 connection to meet the market standard. It fits into your mouth perfectly when doing mouth-to-lung (MTL) inhales. It's made to let you enjoy your thick and rich draws of nicotine hitsmouth to lung.

authentic-wotofo-stng-mtl-rda-rebuildable-dripping-atomizer-stainless-steel-ss-22mm-diameter.jpg
authentic-wotofo-stng-mtl-rda-rebuildable-dripping-atomizer-stainless-steel-ss-22mm-diameter.jpg

authentic-wotofo-stng-mtl-rda-rebuildable-dripping-atomizer-stainless-steel-ss-22mm-diameter.jpg
authentic-wotofo-stng-mtl-rda-rebuildable-dripping-atomizer-stainless-steel-ss-22mm-diameter.jpg


Main Feautures:
Diameter: 22mm
Body Material: Stainless Steel
Insulator Material: German PEEK
Overall Height: 43.15mm (with drip tip and 510 pin)
Coil Configuration: Single Coil
Wattage Range: 5~30W
Recommended Ohm Value: 0.4~1.8ohm
Threading: 510 Thread
Juice Feeding Method: Drip / Squonk
MTL-focused drip tip comes right onto the top
Controlled airflow falls into the category of classic design

Want to win's the Original Wotofo STNG MTL RDA for free? :)

Enter the Original Wotofo STNG MTL RDA Giveaway now >>> 1 winners will be chosen randomly.

GyvA8AA.png


If you can not wait for have this item, you can also order the Original Wotofo STNG MTL RDA directly on 3FVAPE.

Thank you for support 3FVAPE, wish you good luck !:D

Wotofo-STNG-MTL-RDA.jpg
 

Gina3FVAPE

VU Vendor
VU Vendor
Diamond Contributor
Member For 4 Years

Gina3FVAPE

VU Vendor
VU Vendor
Diamond Contributor
Member For 4 Years
Hey there.
After two weeks of giveaway activities,the Original Wotofo STNG MTL RDA Giveaway is finally comes to an end.
It's a great honor to be here to publish the final result of the Original Wotofo STNG MTL RDA giveaway.
And send my congratulations to the winners,and thanks for your participate.
If you failed to win this giveaway ,don't feel pity ,we also have several other giveaway activities underway.
Maybe next time the winner is you.

Thank you for joining the giveaway! Click to check the Original Wotofo STNG MTL RDA Giveaway Winner>>


If you want to order this item directly,click on this link to purchase>>>

Thank you for your support to 3FVAPE!
 

Gina3FVAPE

VU Vendor
VU Vendor
Diamond Contributor
Member For 4 Years
Hello everyone.
Good news!
The Original Wotofo STNG MTL RDA is in stock now at 3FVAPE.

Let's check the Real Scene Photo:
z3Isv4k.jpg


Main Features:
Diameter: 22mm
Body Material: Stainless Steel
Insulator Material: German PEEK
Overall Height: 43.15mm (with drip tip and 510 pin)
Coil Configuration: Single Coil
Wattage Range: 5~30W
Recommended Ohm Value: 0.4~1.8ohm
Threading: 510 Thread
Juice Feeding Method: Drip / Squonk
MTL-focused drip tip comes right onto the top
Controlled airflow falls into the category of classic design

Click here,buy it immediately at 3FVAPE:
Original Wotofo STNG MTL RDA >>>

Mechanical Mods you would like:
3FVAPE - Mechanical Mod >>>

Vaping accessories you would like:
3FVAPE - Wick, Wire, Mesh >>>
3FVAPE - Cotton >>>

More Original Wotofo products are available at 3FVAPE:
3FVAPE - Original Wotofo >>>
 

Gina3FVAPE

VU Vendor
VU Vendor
Diamond Contributor
Member For 4 Years
Hey there.
What an exciting news!
The Original Wotofo STNG MTL RDA is in stock now at 3FVAPE.

Let's check the Real Scene Photo:
HUO1C02.jpg


Main Info:
Diameter: 22mm
Body Material: Stainless Steel
Insulator Material: German PEEK
Overall Height: 43.15mm (with drip tip and 510 pin)
Coil Configuration: Single Coil
Wattage Range: 5~30W
Recommended Ohm Value: 0.4~1.8ohm
Threading: 510 Thread
Juice Feeding Method: Drip / Squonk
MTL-focused drip tip comes right onto the top
Controlled airflow falls into the category of classic design

Click here,buy it immediately at 3FVAPE:
Original Wotofo STNG MTL RDA >>>

More MTL Atomizers are available at 3FVAPE:
3FVAPE - MTL Atomizers >>>

Mechanical Mods you would like:
3FVAPE - Mechanical Mod >>>

Vaping accessories you would like:
3FVAPE - Wick, Wire, Mesh >>>
3FVAPE - Cotton >>>

More Original Wotofo products are available at 3FVAPE:
3FVAPE - Original Wotofo >>>
 

Gina3FVAPE

VU Vendor
VU Vendor
Diamond Contributor
Member For 4 Years
Hello everyone.
Good news!
The Original Wotofo STNG MTL RDA is in stock now at 3FVAPE.

Let's check the Real Scene Photo:
9R9wCUK.jpg


Main Info:
Diameter: 22mm
Body Material: Stainless Steel
Insulator Material: German PEEK
Overall Height: 43.15mm (with drip tip and 510 pin)
Coil Configuration: Single Coil
Wattage Range: 5~30W
Recommended Ohm Value: 0.4~1.8ohm
Threading: 510 Thread
Juice Feeding Method: Drip / Squonk
MTL-focused drip tip comes right onto the top
Controlled airflow falls into the category of classic design

Click here,buy it immediately at 3FVAPE:
Original Wotofo STNG MTL RDA >>>

Mechanical Mods you would like:
3FVAPE - Mechanical Mod >>>

Vaping accessories you would like:
3FVAPE - Wick, Wire, Mesh >>>
3FVAPE - Cotton >>>

More Original Wotofo products are available at 3FVAPE:
3FVAPE - Original Wotofo >>>
 

Gina3FVAPE

VU Vendor
VU Vendor
Diamond Contributor
Member For 4 Years
Hey there.
After two weeks of giveaway activities,the Original Wotofo STNG MTL RDA 2nd Giveaway is finally comes to an end.
It's a great honor to be here to publish the final result of the Original Wotofo STNG MTL RDA 2nd giveaway.
And send my congratulations to the winners,and thanks for your participate.
If you failed to win this giveaway ,don't feel pity ,we also have several other giveaway activities underway.
Maybe next time the winner is you.

Thank you for joining the giveaway! Click to check the Original Wotofo STNG MTL RDA 2nd Giveaway Winner>>


If you want to order this item directly,click on this link to purchase>>>

Thank you for your support to 3FVAPE!
 

VU Sponsors

Top