Become a Patron!

The official VAPE MAIL!!!!!!! thread #2

Theboss

VU Donator
Gold Contributor
Member For 4 Years
ECF Refugee
@bx10r Gave me the best tip. Use a oven mitt! Also, and I don't know if this is best, so I may need a slap also. But for the insulator, I put just a dot of a glue stick on each end. ( A very tiny dot of it ) Seems to work fine. :)
Man I thought @bx10r was tougher than that, I just hold it bare handed like a man
:giggle: :giggle: :giggle:

Seriously, not a bad idea!
 

bx10r

Platinum Contributor
Member For 4 Years
Damn..always forget to attack
b61e88edf4654cf04c61a5fa6db8fcf9.jpg


Sent from a very cloudy room
 

Bluenatic

Bronze Contributor
Member For 4 Years
VU Patreon
I saw that kit, very nice man!
Thanks it's nice having 8 color options, between both kits, and more if mixing caps and barrels. I'm lucky my local shop a mile from my house has hobbyists running it so there's all sorts of goodies in stock your run off the mill shop usually doesn't have. Overlord tubes, SQ Topsides, Kali kits, etc.... And since I'm tight with them I always get a text when something they know I like comes in and get first dibs or a hold till payday
 

DonBaldy

Platinum Contributor
Member For 4 Years
@bx10r Gave me the best tip. Use a oven mitt! Also, and I don't know if this is best, so I may need a slap also. But for the insulator, I put just a dot of a glue stick on each end. ( A very tiny dot of it ) Seems to work fine. :)

I bought insulator stickers. Got tired of chasing down insulators that got blown across the room by the dryer.
 

nadalama

Senior Moderator
Staff member
Senior Moderator
VU Donator
Diamond Contributor
Member For 4 Years
VU Patreon
No.. got on reddit.. price was so good i had to

Sent from a very cloudy room

Have you looked at the Dead Rabbit V2? It looks very similar to the Drop Dead to me. Just doesn't have that awesome splatter paint. Matte black might be more practical for me anyway.
 

Theboss

VU Donator
Gold Contributor
Member For 4 Years
ECF Refugee
Its on my list...

Sent from a very cloudy room
I vape single coil 90% of the time, but throw a dual coil atty on once in a while. My buddy who owns a shop in Toronto gave me a great deal on An RDA for vaping, seriously man this thing is unbelievable and I don't get excited for dual coil rda's. I never thought I'd like a dual better than my OG Goon. If you get a chance to pick one up DO IT.
 

bx10r

Platinum Contributor
Member For 4 Years
I vape single coil 90% of the time, but throw a dual coil atty on once in a while. My buddy who owns a shop in Toronto gave me a great deal on An RDA for vaping, seriously man this thing is unbelievable and I don't get excited for dual coil rda's. I never thought I'd like a dual better than my OG Goon. If you get a chance to pick one up DO IT.
its on the same list....lol
my buddy has one
 

nadalama

Senior Moderator
Staff member
Senior Moderator
VU Donator
Diamond Contributor
Member For 4 Years
VU Patreon
Since I was talking about beater mods....

$10 CAD or $7 U.S for this. Ordered 2 that will go in my just in case box

View attachment 151780

I have two of those. If I'm not mistaken, one of them was my very first squonker. Liked it enough to buy another, still use them quite a lot. Work really well with small chambered single-coil RDAs.

I did not care for the Tobhino RDA that came with the Wismec BF kit, though. When it came time to buy the second mod, I did not get a kit.
 

~Don~

Platinum Contributor
Member For 5 Years
So I got the redemption rda in today

Tired of fixing shit. Shouldn’t have to file, buff, polish contacts for it to work right, so I’m not.

44bcc72f4a65d8e70e348f7788659a58.jpg


Simple test aliens I use on all rdas I get... .14 , .137 actually but I digress, this is the factory deck.

24e84496fed8513dc381345c76753e02.jpg


This is the poopy voltage with a fresh 30T

301b1bf6c56147ac1233292c0e74438e.jpg


This is the silver deck they had also for $6

57760c3adcfb904a05f0bd86b587a2cc.jpg


This is the better but still poopy voltage.

I forget who told me to try this RDA, but your Performance Mech Card is revoked

In to the drawer of shit it goes


Sent from my iPhone using Tapatalk
 

Theboss

VU Donator
Gold Contributor
Member For 4 Years
ECF Refugee
So I got the redemption rda in today

Tired of fixing shit. Shouldn’t have to file, buff, polish contacts for it to work right, so I’m not.

44bcc72f4a65d8e70e348f7788659a58.jpg


Simple test aliens I use on all rdas I get... .14 , .137 actually but I digress, this is the factory deck.

24e84496fed8513dc381345c76753e02.jpg


This is the poopy voltage with a fresh 30T

301b1bf6c56147ac1233292c0e74438e.jpg


This is the silver deck they had also for $6

57760c3adcfb904a05f0bd86b587a2cc.jpg


This is the better but still poopy voltage.

I forget who told me to try this RDA, but your Performance Mech Card is revoked

In to the drawer of shit it goes


Sent from my iPhone using Tapatalk
I've never tried that rda, but man your luck with these lately is shit!
:poop:

I did endorse the C2MNT
 
Last edited:

nadalama

Senior Moderator
Staff member
Senior Moderator
VU Donator
Diamond Contributor
Member For 4 Years
VU Patreon
The C2MNT with .12 Aliens

0a9ec43b6f2c5b3922e9c06c14f24d56.jpg


I do like this rda


Sent from my iPhone using Tapatalk

Wonder if the original CSMNT would have tested that well? Layercake? I only have CSMNT clones, have no idea how they compare, but they are some of my favorites. Have an authentic Layercake that I got for next to nothing a few weeks ago. It's good, but I don't like it nearly as well as the CSMNT clones.

Have two C2MNT clones on the way, should be here Friday. FT did not list the manufacturer of these clones, so don't really know what to expect. I already know that quality of clones can go from the (nearly) sublime to the ridiculous.
 

~Don~

Platinum Contributor
Member For 5 Years
Wonder if the original CSMNT would have tested that well? I only have clones, have no idea how they compare, but the CSMNT is one of my favorites. Have two C2MNT clones on the way, should be here Friday. FT did not list the manufacturer of these clones, so don't really know what to expect.

The original is the one Mooch uses in his tests, and he posted the actual loss on that RDA... was sort of the feather that padded the decision of me grabbing the newer one... how worse can basically the same design RDA be with just the screws in a different position?
 

nadalama

Senior Moderator
Staff member
Senior Moderator
VU Donator
Diamond Contributor
Member For 4 Years
VU Patreon
The original is the one Mooch uses in his tests, and he posted the actual loss on that RDA... was sort of the feather that padded the decision of me grabbing the newer one... how worse can basically the same design RDA be with just the screws in a different position?

The price on the C2 isn't bad - less than I would have expected, actually, and it's already squonkable, unlike the original CS. It's a silly thing to consider, I guess, but I like the etching on the CS so much better. Just not all that into the skulls thing, personally. It's somewhat less of a consideration since the artwork on the cap is not very bold and obvious.

ETA: The price just got quite a bit better. Districtf5ve.com has 25% off everything until Christmas Day with code 1225. Takes the price of the C2MNT down to about $34 and some change, plus shipping.
 

gsmit1

Platinum Contributor
Member For 4 Years
So I got the redemption rda in today

Tired of fixing shit. Shouldn’t have to file, buff, polish contacts for it to work right, so I’m not.

44bcc72f4a65d8e70e348f7788659a58.jpg


Simple test aliens I use on all rdas I get... .14 , .137 actually but I digress, this is the factory deck.

24e84496fed8513dc381345c76753e02.jpg


This is the poopy voltage with a fresh 30T

301b1bf6c56147ac1233292c0e74438e.jpg


This is the silver deck they had also for $6

57760c3adcfb904a05f0bd86b587a2cc.jpg


This is the better but still poopy voltage.

I forget who told me to try this RDA, but your Performance Mech Card is revoked

In to the drawer of shit it goes
I believe that would be me, but to be fair, I made no claims about voltage drop. Only that it was very inexpensive and worth trying :rolleyes:

I know what you're gonna say to this, but it does vape great. :D

BTW, what method are you using to test voltage drop on an atomizer with a multimeter?
 

~Don~

Platinum Contributor
Member For 5 Years
I believe that would be me, but to be fair, I made no claims about voltage drop. Only that it was very inexpensive and worth trying :rolleyes:

I know what you're gonna say to this, but it does vape great. :D

BTW, what method are you using to test voltage drop on an atomizer with a multimeter?

I use my Goon V1+ Overlord Mech as the baseline, which with my test Aliens read 3.79v ... I install those Aliens, preheat them with my regulated, transfer it to the Overlord, touch the leads to the posts and fire it 3 times... Acceptable voltage for me is anything above 3.7v anything below and its truly in my opinion shit for mech use.

Is it bullet proof science... nope... but its the best I can do... Fresh 30T's, same mech (I clean it before doing a test), same exact coils... only outlier is the RDA

I might see how it vapes on the Double Barrel V3... but I have the US1 V2 RDA on there, and that is a really good RDA... not the most pleasing to look at... but far from the worst... which the US1 was awful also before I broke it down and filed it... now its singing at 3.72v...

I broke the RedemptShit down and did my thing... didn't improve at all... so its a regulated mod RDA for sure
 

~Don~

Platinum Contributor
Member For 5 Years
Here's a great question.
Off the top of your head (unless you keep records), about how many attys have you tested and of those how many have passed?


Vaporz Cloud X1 was 3.71... I ended up cracking the post sadly

US1 V2 RDA - 3.72

C2MNT - forget think it was 3.76v or 3.74v

Goon V1- 3.79v (control)

The worst is by far the RedemptShit RDA I got in today 3.43v and 3.54v after I filed and polished the contacts...but imagine that 3.43v... 30a build with no drop is 3.89v on 30Ts (Extrapolated from Moochs graph)

But to answer directly...2 VC-X1 and Goon V1... I didn’t file or polish the contacts on those, caveat being used at a low build.

Now voltage from squonks when I was a squonk head...man so many high end rdas were shit also...but I wasn’t building low testing them...but my control RDA for squonk laughingly is a Clone (Le Concorde)

There were a few of us in Bonkers thread who voltage tested mech squonks also (hate to say it... the Armageddon was a dud) and the pico squeeze mosfet outdid many high end mech squonks in 18650... solid silver contact and silver plated 510s although nice for cleaning purposes... was rather insignificant in voltage due to how the 510 wasn’t as solidly built and added additional connections for voltage loss.

Me doing my testing as I do isn’t new...I just post more about it now than I did when I was new here and mainly doing it for squonk related stuff.

At least these RDAs I’ve been buying are under $60... most of my authentic RSAs were $140+ each

Wow that was a wall of text... hope I answered your question...


Sent from my iPad using Tapatalk
 

nadalama

Senior Moderator
Staff member
Senior Moderator
VU Donator
Diamond Contributor
Member For 4 Years
VU Patreon
Vaporz Cloud X1 was 3.71... I ended up cracking the post sadly

US1 V2 RDA - 3.72

C2MNT - forget think it was 3.76v or 3.74v

Goon V1- 3.79v (control)

The worst is by far the RedemptShit RDA I got in today 3.43v and 3.54v after I filed and polished the contacts...but imagine that 3.43v... 30a build with no drop is 3.89v on 30Ts (Extrapolated from Moochs graph)

But to answer directly...2 VC-X1 and Goon V1... I didn’t file or polish the contacts on those, caveat being used at a low build.

Now voltage from squonks when I was a squonk head...man so many high end rdas were shit also...but I wasn’t building low testing them...but my control RDA for squonk laughingly is a Clone (Le Concorde)

There were a few of us in Bonkers thread who voltage tested mech squonks also (hate to say it... the Armageddon was a dud) and the pico squeeze mosfet outdid many high end mech squonks in 18650... solid silver contact and silver plated 510s although nice for cleaning purposes... was rather insignificant in voltage due to how the 510 wasn’t as solidly built and added additional connections for voltage loss.

Me doing my testing as I do isn’t new...I just post more about it now than I did when I was new here and mainly doing it for squonk related stuff.

At least these RDAs I’ve been buying are under $60... most of my authentic RSAs were $140+ each

Wow that was a wall of text... hope I answered your question...


Sent from my iPad using Tapatalk

This?

https://www.ivapesupply.com/ivapesupply/x1-rda-stainless-24mm.html

They have copper also for $13.
 

gsmit1

Platinum Contributor
Member For 4 Years
Mine was the Stainless one, I liked that rda, just not so much the weird drip tip...still have the custom Drip tip I had made for it, which now sits on my Flave 24 I bought long ago when I want to go single coil
What didn't you like about the drip tip and how was the one you made different? I'm asking these questions because I'm genuinely curious. I can get into moods for different drip tips. The one on the OG Goon is tall and straight while the one on the Goon 25 is super short and stubby. Perfect for me would be between the two.
 

~Don~

Platinum Contributor
Member For 5 Years
What didn't you like about the drip tip and how was the one you made different. I'm asking these questions because I'm genuinely curious. I can get into moods for different drip tips. The one on the OG Goon is tall and straight while the one on the Goon 25 is super short and stubby. Perfect for me would be between the two.

its just a hybrid blue color and not an 810... but just a smidge larger... damn companies who make proprietary drip tip holes (Looking at you AllianceTech and Vaperz Cloud)

will edit in a pic in a sec...

Edit

60a7050f789e737af5ede956ed3b998a.jpg




 

c.diehl

Gold Contributor
Member For 5 Years
Good stuff. I have both. I've only had one build and and only wicked the RBA once. I think I have it just a hair too tight. Not bad, but I'm going to loosen up the wicking a smidge next time I rewick it.
I gotta get some smaller gauge wire this thing is tiny

Sent from my PH-1 using Tapatalk
 

gsmit1

Platinum Contributor
Member For 4 Years
I gotta get some smaller gauge wire this thing is tiny
Yeah, that's was I was saying the other day. REALLY small.
I love the little building base they give you.
Don't forget to check that bottom post screw too.
I ordered 3 more. One for a friend with a Smok Priv N19.
 

VU Sponsors

Top