Smok X PRIV mod and I need all the components that make up the center pin that including the clear small rubber piece that holds the spring inside the center pin, the spring, center pin (which has a solder joint thats connected to the 16G or 18g white wire in the picture) itself that is surrounded by a black, rubber grommet that you can see when you twist the atomizer into the Smok X Priv Module. The Gold Smok X Priv in the picture had a birds eye like view of the picture that you can see the center pin. The 5/10 thread on the Module is capable of (the TFV12 Atomizer threads into it) coming off and thats where you would see every part of the centering pin that I need excluding the clear thin rubber piece (that goes over the spring) and spring. I'm sure they sell all of this in a kit or on a website that sells used Module components but I have only found adapters to replace the 5/10 center pin (that the atomizer thread into) and it includes everything so you do not need to solder any wires like I have to just to access the spring itself. I also need to know the thickness of the white wire which I believe is 16 or 18g because I attempted to solder the wire to the back end of the center pin and ended up having to cut the wire several times where now it's down to the motherboard.View attachment 157800
View attachment 157798 View attachment 157799
View attachment 157798 View attachment 157799