What is your favorite atty right now?

katwain58 · Jul 9, 2014

Love my Stillare clone at .4. This past week I received my authentic TOBH v2 in the mail. Awesome! Love them both. I think the Magma will be my next purchase.

MoFo · Jul 9, 2014

katwain58 said:
Love my Stillare clone at .4. This past week I received my authentic TOBH v2 in the mail. Awesome! Love them both. I think the Magma will be my next purchase.

After watching a few youtube reviews on the Magma I decided to pull the trigger on one. It'll be here Saturday!

Crocky · Jul 9, 2014

My magma and tobh are my favorites! I had to drill out the air holes of the magma on the wall as well as the holes on the deck but it rocks now, using it on my copper 4nine. Best flavor and vapor for sure! In fact just ordered another one.

havok333 · Jul 11, 2014

Eph said:
Still pretty new to rebuilding, just using an igo-w with halo top cap.

This is a great setup! Have two I keep in rotation at all times. Zenith V2 clone works a little better because of the larger air holes but gets quite a bit hotter than the IGO-W/halo setups.

StinkMutt57 · Jul 11, 2014

EHPro Sledgehammer 26650 MOD in stainless, and the Cerberus ( CLONE ) RDA just came in the mail today and I must say it's not to bad.
Did (3) - 5 wrap, 28g with cotton and it came out to 0.33 and WOW it's not to bad at all.
Note the 30amp sony in the photo's (that's just there to show off cloud)

Slicknic · Jul 12, 2014

My current favorite is the 454 Big Block.

ZoidbergAK · Jul 12, 2014

Using my penny clone with my infinite magma. been burning this combo for weeks!

UncleRJ · Jul 12, 2014

KFL+ with a Quartz tank set up.

1.9 ohm coil with Ramie fiber.

What can I say, this ROCKS!

StinkMutt57 · Jul 12, 2014

EHPro Sledgehammer 26650 MOD in stainless, and the Cerberus ( CLONE ) RDA just came in the mail and I have to tell ya,, this thing looks GOOD!

Note the 30amp Sony Batt in the photo. This thing will run 18650's and or 26650's. Not to bad.

PirateB · Jul 16, 2014

My favorite atty currently is my Aiolos-T by GUS Mods. Pretty much an Aqua/Kayfun type rebuildable, but it's the size of a Spheroid. Even on my 14500 GUS mod at 1.5Ohms it produces a nice warm vape and good clouds.

u4ia · Jul 19, 2014

Definitely the Magma right now. I was amazed at how noticeably better the flavor was over other atty's I have.

twisted_transistor · Jul 20, 2014

Been using the atomic almost exclusively for the past 4-5 days

not2coolguy · Jul 20, 2014

Magma, FO SHO

M5amhan · Jul 20, 2014

holy crap i just made a perfect build in my magma at 1.5 ohms 28 gauge and my god i think im in love with this atty

talk about juicy! i almost wanted to make a thread for this but that might be taking it a bit far lol

Valkyrie · Jul 20, 2014

old school trident (infinite magma on order)
russian 91%
wife on the other hand...cyclone w/afc and kayfun 2.1

chris damron · Jul 21, 2014

Right now it's the Russian 91% and the mephisto. I just wish the mephisto had the airflow of my zenith, it'd be the perfect atty if it did.

twisted_transistor · Jul 21, 2014

chris damron said:
Right now it's the Russian 91% and the mephisto. I just wish the mephisto had the airflow of my zenith, it'd be the perfect atty if it did.

I have both a zenith and a mephisto and my mephisto gets more air when wide open but its not as wide just taller

MrFixIt · Jul 22, 2014

I'm currently digging the magma by infinite and believe it or not I came across my old igo l the other day. Talk about a reduced chamber. I threw on a 26ga kanthal .5ohm micro coil on it of course the air hole is drilled out and wow was I surprised by the results. Awesome flavor and big, dense, crisp vapor production

I'm thinking of getting a couple more of igo L's to experiment with air flow hole size and number of see what I can make them do.

ZoidbergAK · Jul 24, 2014

I have been using my magma as i posted above, but i received a Vulcan RDA yesterday, been using this all day. I gotta say, it gets the vapor of the Tobh atty, with the flavor of the Magma. running 0.75ohm with twisted 28ga and cotton. very, very nice.

chris damron · Jul 25, 2014

I revisited my authentic patriot v1.2 and forgot how much I love this thing. It's a lot like a tugboat, but with a 24k gold plated center post and without the leaking

. I know it'll last a lifetime because it's built like a brick shithouse.

James · Jul 25, 2014

Clone aerotank .

Kemosabe · Jul 25, 2014

Vaping PBR said:
Mephisto hands down no need for any other dripping atomizer unless they some how beat the design and setup of it.

forgive my ignorance- i cant seem to figure out what is unique about the mephisto. the only photos i have found seem to be just showing that its a 3-post rda with large post holes and a smallish chamber. seeing how you have one in-hand, what is it that you like about the design/setup?

Kemosabe · Jul 25, 2014

origen clone dripper right now is likely my fave but the igo-m is a front runner as well. same goes for my 24k trident clone and veritas clone. the veritas is amazing in that you have to really *try* to get it to leak. i only wish it had a brass or copper pos pin.

the plume veil clone and the magma are next on my list of drippers.

for tanks, i still rock my AGT genny- it rocks. but just about all of my other gennys no longer get love lol. my kayfun and aqua just beat them out. sure i like the flavor from mesh better but damn if these vacuum tank attys arent easy as pie. i can sacrifice a bit of flavor for ease of use. no problemo.

VapedCrusader · Jul 25, 2014

Magma will be my next buy.. for clouds the TOBH is killing it for me right now..

for non dripping, my Kayfun v3's are always in rotation! Just got one in black color to match my new AR mod

blue305 · Jul 25, 2014

ruzgar

tick22 · Jul 25, 2014

right now, my Stillare clone is my fav. next week it may be something else. Getting a Magma and I hear those are rock solid for flavor. Will know after I get it..

st_andrew · Jul 26, 2014

Kayfun 3.1 clone (hcigar)

Galaxyrider · Jul 27, 2014

I just ordered an M-16 and a Nimbus is coming with it as part of a package. All of you have mentioned so many great choices that Im going to lay aside $20-$30 a month to buy up new toys.. and Kanthal.
The KFL was my first, and its been my daily go to for over a month now.

st_andrew · Jul 27, 2014

tick22 said:
right now, my Stillare clone is my fav. next week it may be something else. Getting a Magma and I hear those are rock solid for flavor. Will know after I get it..

Thinking about gettin the magma myself

jumper · Jul 28, 2014

I love my Kraken using 28 gauge kanthal. I use it on a Stingray. FYI: If anyone has button issues, I swapped buttons with my Nemesis and it works much better than the original Stingray button.

denrock316 · Jul 28, 2014

Stillare @ .25ohm

tick22 · Jul 29, 2014

Got the Magma today and damn, it is something else. Still playing with it doing different builds but that well. It's like a mini pool for ants. Holds 10 drops no problem and in fact could hold more. So, yes it is now my fav Atty followed by my Stillare clone. Flavor and clouds to die for. Well, until the next great atty comes along but this one will be hard to beat.... Hell, the stock coils (not installed) it comes with ohms out at .21 to .23 ohm finished resistance. also using 24 gauge wire it looks like, no wicks, pick your own..

easy deck to build one and the air flow holes under the coils and air flow control covers most bases...
A purchase that I do not regret.

tick22 · Jul 29, 2014

M5amhan said:
holy crap i just made a perfect build in my magma at 1.5 ohms 28 gauge and my god i think im in love with this atty View attachment 2182

talk about juicy! i almost wanted to make a thread for this but that might be taking it a bit far lol

what is that 10 wraps on what? Want to try that one.. Been doing under ,5 and just want a normal 1.5 or close...

Hobby Kid · Jul 29, 2014

I had a little session on my patriot tonight. I used to use it a lot but wasn't as flavourful as I remembered it to be. I'd made some big air holes in it. It still blows big clouds but needed rejuicing after every one or two toots

tick22 · Jul 29, 2014

Mine is the same way. I use her every so often, but now the Magma I can toot on her for awhile for a atty...

M5amhan · Jul 29, 2014

tick22 said:
what is that 10 wraps on what? Want to try that one.. Been doing under ,5 and just want a normal 1.5 or close...

5/64th drill bit or one of those chinese screw drivers.. both are same size

CurlyxCracker · Jul 29, 2014

M5amhan said:
5/64th drill bit or one of those chinese screw drivers.. both are same size

Didn't I just recommend those screwdrivers for wrapping tick? Lol

tick22 · Jul 29, 2014

yes, you did Curly. still need to learn to do higher ohms. that blue screw driver is going to come on handy. I have 4 of them. sheesh, I find they are worthless for what they are suppose to do. So wrapping wire is a good thing...

Thanks M5amhan

Taylor · Jul 29, 2014

ZoidbergAK said:
I have been using my magma as i posted above, but i received a Vulcan RDA yesterday, been using this all day. I gotta say, it gets the vapor of the Tobh atty, with the flavor of the Magma. running 0.75ohm with twisted 28ga and cotton. very, very nice.

I picked up my Vulcan last week and I'm in love! Nice deep juice well like a magma but the sides are cut out to have optimal working room. It is interchangeable with the TOBH and the extra heat sinks at the bottom are great and give it a nice look as well. Additionally it come with 3 sets of screws to meet your fancy and additional o-rings just in case. The airflow holes are part of the logo though, making it undesirable to drill them out unless you want an "Oulcan" but in my opinion the airflow is fine how it is. I'm running dual 22g at 0.29ohm and I love it, hits like a champ and tons of vapor.

tick22 · Jul 29, 2014

Taylor says..The airflow holes are part of the logo though, making it undesirable to drill them out unless you want an "Oulcan"

Laughs, now that was kind of funny in a weird sort of way. Thanks for the laugh, I needed one just now..

Hey babe, look at my new Oulcan. laffs...

jaytongret · Oct 8, 2014

Igo m however a tobh is in my near future

Sent from my iPhone using Tapatalk

Free2Vape · Oct 8, 2014

Well, using the Mutation X atm... Plume veil should be here next week. I do jave to say that I always go back to the origen, it just hits hard and wirks perfect at my .40 ohm builds i like for day vape. All otjers are collecting dust

Sent from my iPhone using Tapatalk

77Bigfoot77 · Oct 8, 2014

I'm loving the Lemo's right now

Roger Schaeffer · Oct 8, 2014

Russian then kraken putting money aside for Russian 2.0

MoFo · Oct 8, 2014

I just picked up the Infinite CLT v2 and I'm loving it. For me, the flavor is comparable to the plumeveil but has slightly more airflow than the pv 1.2. I haven't tried the pv 1.5 yet. It has a super deep juice well, negative post air holes, a positive block, and a mega wide bore drip tip. The only con that I can give this thing at the moment is that you're stuck with the two provided drip tips since an adapter wasn't included.

OBDave · Oct 8, 2014

That Infinite CLT sure looks nice. I'm still loving my Igo-M, switching back and forth between that and a Plume Veil and having great luck with both, but the CLT could be the next addition, given how cheap it is...

Galaxyrider · Oct 9, 2014

tick22 said:
what is that 10 wraps on what? Want to try that one.. Been doing under ,5 and just want a normal 1.5 or close...

I can only imagine that @ .75... I think thats on my list now!

Galaxyrider · Oct 9, 2014

Roger Schaeffer said:
Russian then kraken putting money aside for Russian 2.0

I have to say.. I LOVE my KFL.. but after seeing the "Big Budda" (2 coils) thats a MUST HAVE.

VH fan · Oct 9, 2014

Veritas and Magma , love both equally.

VH fan · Oct 9, 2014

M5amhan said:
holy crap i just made a perfect build in my magma at 1.5 ohms 28 gauge and my god i think im in love with this atty View attachment 2182

talk about juicy! i almost wanted to make a thread for this but that might be taking it a bit far lol

Thats the exact range i build my Magma with , no need to sub ohm , i get the best flavor with builds from 1.4-1.8 with it typically running 15-18 watts.

What is your favorite atty right now?

Attachments

Will write reviews for Beer!

Attachments

Custard Junkie

Brighton Boy

VU Sponsors